- DESCRIPTION
-
100% brand new, universal style
With blue illumination,can be seen easily at night
With Relay box for driving security
Suitable for DC 12V vehicles only
Dimension: Outer ring diameter-32mm/1.26inch, hole diameter:29.5mm/1.16inch
Installation Description:
1. Stop the car and shut off the engine
2. Fix the "Push Button" to appropriate position
3. Pass the wire through the partition board and press the starting
switch, against the partition board, the attach, the rubber ring and tighten
the nut.
4. Connect the push button connector to the Relay Box
5. The black wire should be earthed to the mental bodywork of
the car or the negative side of the battery
6. The blue wire should be connected to terminal 15(ign) behind
the ignition switch, another one connecting terminal 50 behind the ignition
switch
7. The red wire should be connected to the terminal 15. (The
power path that passes through ign)
8. Fix the Relay Box using the double side tape and screws
Notices:
Need to cut a hole on the dashboard
If the engine is running, do not press the engine start button again. It may lead to a starting device failure.
How to start the engine
1. Turn your ignition key to "on"
2. Press the engine start button. Release as soon as the engine fires
- CONTENT
-
1x engine start switch, 1x relay box, 1x hexagon ring
Screws and adhesive tapes
BRh2hH!jNg~~60_3.JPG)
