Dryer Buddy #6 30amp 240v outlet splitter with Volt/Amp meter!

In the package, you will receive:

o Your very own Dryer Buddy #6 30amp 240v outlet splitter with the following cable and outlets

· A 30-amp 5-foot 3-prong dryer cord (NEMA 10-30 plug)

· One 30-amp 3-prong 240v Dryer outlets (NEMA 10-30 outlet)

· One 30-amp 3-prong 240v twist-lock (NEMA L6-30 outlet)

o Assembled by BSA Electronics in Las Vegas, NV

o Trusted seller, check my feedback score.

o 2 year parts/labor warranty

Product Description

Dryer Buddy #6 30amp 240v outlet splitter is ready to plug into any common 3-prong Dryer outlet know as a NEMA 10-30 outlet (240volt / 30amp), These are common in homes before 1996. Dryer Buddy #1 works with all L6-30 plug equipped EV charging stations. It offers a fast non-permanent installation of your EV charging station without the need to call an expensive electrician for a new outlet. It features a Volt/Amp meter so you can keep an eye on the current being drawn and verify your outlet is receiving the full 240volts.

Dryer Buddy allows you to share your dryer outlet with your EVSE, allows both to share the 30A circuit. As running a Dryer on low heat/tumble dry doesn't use nearly as much power as high heat a ammeter is included so you may see how much current your dryer uses and you can use the rest to charge your car! Or just charge at night when not doing laundry and use the full circuit to charge your car. Great for apartment dwellers, temp housing or an easy hookup at a friend’s/relative’s house. Housed in a solid 6x6x4 PVC gray box.

Far less money than hiring an electrician and pulling permits for a new outlet.
Can be used with the very common 3-prong Dryer outlets found in homes and apartments built before 1996.
Allows you to draw up to 24amps continuously with your Electric vehicle charging station (EVSE) using the 80% rule of thumb.
Great for both Home or on-the-road charging: Dryer Buddy can be taken with you, just unplug a few cables and bring it with you. Dryer Buddy is just 6"x6"x4" and weighs ~4lbs.

More information

For many more options download my PDF:

https://www.dropbox.com/s/hc6ei1dkkqwbiwz/BSAelectronics%20EVSE%20flyer.pdf?dl=0

It contains my company's email address. I also sell directly and accept PayPal. You will see the prices are lower buying directly from my company.

Flexibility:

The Dryer Buddy can plug into and split any NEMA 10-30 outlet to run two items.

Specs:

• Volt/Amp meter with blue backlight

• The input cable is 30A 5ft. 10ga. with the popular NEMA 10-30 plug also known as a 3-prong Dryer cord

• One NEMA 10-30 outlets (240v 30amp)

• One NEMA L6-30 outlets (240v 30amp twist-lock)

• All 30amps parts provides 24amps continuous power handling

• All parts are new.

Customizable:

This is only one of over a dozen Dryer Buddy’s that I build!

Each Dryer Buddy has a plug and two outlets; here are a few of the most popular ones:

Dryer Buddy #1 Allows you to share your dryer’s 3-prong outlet. Built with;

· A NEMA 10-30 plug w/5ft. cable

· This was the common dryer plug before 1996.

· Two NEMA 10-30 outlets

· Volt/Amp meter

Dryer Buddy #2 Allows you to share your dryer’s 4-prong outlet. Built with;

· A NEMA 14-30 plug w/5ft. cable

· This is the common dryer plug used in 1996 and up.

· Two NEMA 14-30 outlets

· Volt/Amp meter

Dryer Buddy #3 Allows you to share your dryer’s 4-prong outlet. Built with;

· A NEMA 14-30 plug w/5ft. cable

· This is the common dryer plug used in 1996 and up.

· One NEMA 14-30 outlet

· One L6-30 twist-lock outlet

· Volt/Amp meter

Dryer Buddy #4 Allows you to share your dryer’s 3-prong outlet. Built with;

· A NEMA 10-30 plug w/5ft. cable

· This was the common dryer plug before 1996.

· One NEMA 10-30 outlet

· One NEMA 10-50 outlet

· kWh meter, provide volts & amps but adds wattage and kilowatt hours (kWh) which is stored and can be reset.

Dryer Buddy #4 is basically a Dryer Buddy #1 with a 14-50 outlet instead of the 2^nd 10-30 outlet so you don’t have to buy an adapter in addition and a step up to the kWh meter.

Dryer Buddy #5 Allows you to share your dryer’s 4-prong outlet. Built with;

· A NEMA 14-30 plug w/5ft. cable

· This is the common dryer plug used in 1996 and up.

· One NEMA 14-30 outlet

· One NEMA 14-50 outlet

· Volt/Amp meter

Dryer Buddy #6 Allows you to share your dryer’s 3-prong outlet. Built with;

· A NEMA 10-30 plug w/5ft. cable

· This is the common dryer plug used in 1996 and up.

· One NEMA 10-30 outlet

· One L6-30 twist-lock outlet

· Volt/Amp meter

Dryer Buddy #7 Allows you to share your dryer’s 3-prong outlet. Built with;

· A NEMA 10-30 plug w/5ft. cable

· This was the common dryer plug before 1996.

· One NEMA L14-30 twist-lock outlet

· Volt/Amp meter

All the Dryer Buddy's are available in a Plus version. The Plus version is a 2-way switcher that adds a high current relay and power supply inside to power only one outlet at a time. It also gets a power indicator LED above each outlet and a toggle switch on the face. You may upgrade any Dryer Buddy to a Plus version.

Here is one example:

Dryer Buddy Plus #4 A 2-way switcher that allows you to share your dryer’s 3-prong outlet. Built with;

· A NEMA 10-30 plug w/5ft. cable

· This was the common dryer plug before 1996.

· One NEMA 10-30 outlet

· One NEMA 10-50 outlet

· High power relay, illuminated rocker switch

· Power indicator LED above each outlet

· kWh meter, provide volts & amps but adds wattage and kilowatt hours (kWh) which is stored and can be reset.

Dryer Buddy Plus #4 is basically a Dryer Buddy Plus #1 with a 14-50 outlet instead of the 2^nd 10-30 outlet so you don’t have to buy an adapter in addition and a step up to the kWh meter.

I can customize a Dryer Buddy for you with which ever plug/socket combo you would like and the meter of your choice or no meter. Private message me if you have any questions or would like to make a purchase.

I offer a 2 Year Parts and Labor Warranty on all my Dryer Buddy's

If you would like the unit customized with a twist lock plug for example or something other than the NEMA 10-30 plug I can do that for the difference in parts. For example a L6-30. This would allow you to use many adapters. I also build custom adapters, see my PDF.

I worked hard on a nice PDF featuring just some of the EVSE's I build and accessories. Check it out here for current direct pricing:

https://www.dropbox.com/s/hc6ei1dkkqwbiwz/BSAelectronics%20EVSE%20flyer.pdf?dl=0

Custom order possibilities:

I get a lot of inquires about custom builds. YES I definitely take orders for anything you would like to see in your EVSE. Feel free to ask a question.

Works with the following vehicles and more!
Nissan LEAF
Toyota RAV4
Toyota Prius Plug-in
Chevrolet Volt
Chevrolet Spark EV
Mitsubishi i-MiEV
BMW i3
BMW i8
Cadillac ELR
Fiat 500e
Ford C-max Energi
Ford Fusion Energi
Ford Focus Electric
Honda Accord Plug-in Hybrid
Smart ForTwo Electric Drive
Porsche Panamera S e-Hybrid
Toyota Prius Plug-in Hybrid
Volkswagen e-Golf
Kia Soul EV
Tesla Model S (with included OEM J1772 adapter)
Tesla Model X (with included OEM J1772 adapter)

Simply plug your Electric vehicle charging station (EVSE) with a L6-30 plug into the Dryer Buddy and set it for 24amps or less to fast charge your EV!

Case Specs:

• 6”x6”x4” Electrical box

• Mounting tabs on all 4 corners

• High quality thick walled PVC plastic, designed for electrical use

Meter Specs:

• Voltage range: 80-300v AC

• Ammeter range: 0-100a AC

Keywords:

240v splitter

Dryer splitter

30amp outlet splitter

An electric vehicle charging station is also called

Electric Vehicle Service Equipment or

EVSE for short

also commonly called a:

electric vehicle charger

electric car charger

Level 2 charger

240v quick charger

EV fast charger