eCLUTCHMASTER STAGE 3 Phase Racing Clutch Kit
is a brand new heavy duty
racing pressure plate with 6 puck solid
rigid
racing disc setup can
hold up to
325
HP & 319FT/LBS OF TORQUE and
80% more
pressure increase over stock.
The eCLUTCHMASTER STAGE 3 PHASE Racing clutch system uses eCLUTCHMASTER STAGE 3 PHASE Heavy duty pressure
plate with 6 puck solid miba rigid ceramic disc. This is ultimate extreme-duty street
or road / drag racing system. It is built using a special 6-wing ceramic button
design disc for long life, outstanding holding capacity and high heat dissipation.
All eCLUTCHMASTER STAGE 3 PHASE Racing pressure plates
are made from ductile iron (2200 LBS CLAMPING
LOAD) which is about 60-70% stronger than
conventional cast iron pressure plates other
racing clutch manufactures use.
It is recommended for use with 'modified'
vehicles used for "street and strip".
This unit has also proven itself to be very
capable for four wheel drive and off-road
use, also heavy duty towing and commercial
applications.
It offers 70% more
holding capacity than a stock 'OEM' clutch while maintaining
a stock pedal feel.
About
eCLUTCHMASTER STAGE 3 PHASE 6 PUCK SOLID RIGID RACE DISC
If you want the best the industry has to
offer -- Ask for eCLUTCHMASTER STAGE 6 PUCK MIBA SOLID RIGID RACING CLUTCH DISC WITH MIBA COMPOSITE.
The eCLUTCHMASTER STAGE 3 PHASE 6 PUCK SOLID RIGID RACE DISC also uses
our high torque internal assembly, but goes
one step further in terms of friction. This
disc uses an advanced hybrid iron and carbon
combination delivering aggressive bite and
increased thermal capacity. Uncharacteristic
of the typical aggressive racing disc, the eCLUTCHMASTER STAGE 3 6 PUCK SOLID RIGID DISC provides outstanding stability,
smooth engagement, and less wear on opposing
plates.
This combination has proven to be premier
unit with regards to both performance and
drivability for the daily driver with
serious torque holding requirement.
This system is recommended
as the finest quality 'upgrade' from the
original equipment clutch.
This kit comes with everything you need
for a new clutch job or clutch upgrade.
Lastly, resurface and rebalance the flywheel
prior to installation for best performance
and result!
Features of
eCLUTCHMASTER® STAGE
3 PHASE RACING CLUTCH SYSTEM:
- Heavy Duty Stage 3 PHASE HEAVY DUTY racing pressure
plate
- Hi-Leverage Design
- Precision heat treated single
diaphragm
- Re-Arched Diaphragm for Superior
Engagement
- High clamping force
- increase in pedal
pressure
- Holds power and rapidly dissipates unwanted heat.
- Solid 6 puck disc for Maximum holding capacity
- Decal
**The throwout bearing and pilot
bearing (if required) included ($80 value)
for free!
Street or Long life of clutch BREAK-IN
required.
|