THIS LISTING IS FOR A TAYLOR MADE TRAILERABLE T-TOP BOAT COVER CUSTOM SEWN TO FIT A CENTER CONSOLE BOAT WITH A T TOP WITH OR WITHOUT BOW RAILS 17'5" TO 18'5" IN LENGTH

TAYLOR MADE MEANS DEPENDABLE QUALITY AND DURABILITY - MADE IN THE USA!

These high quality TAYLOR MADE  T -Top Boat Covers are MADE TO ORDER in America. They offer total boat cover protection for center console boats that have fixed position "T" Tops.  THESE COVERS ARE DESIGNED FOR EASY ONE PERSON INSTALLATION. You do not pull the cover over the entire T Top cover frame, ( see pictures ). The cover is installed in two halves utilizing zippers. The two cover halves zip together at the mid point of the console body. You zip and secure the cover over your console on one side and then zip secure the other side to complete the installation. After you adjust the straps to fit your boat, and with a little practice, ONE PERSON, (without ladders), CAN INSTALL THE COVER IN LESS THAN 5 MINUTES. The cover incorporates several adjustable snap lock straps. During the initial installation you will adjust the boat cover straps so that the cover will conform to fit your boat. These adjustments need to be made only once. The cover design provides a full console cover. Adjustable straps secure the cover halves over the console body windshield hand rail and tighten up the console cover around the "T" Top supports. The front half of the console cover incorporates a protective weather flap that covers the open area between the supports. The protective flap does not trap moisture. It is designed to protect the console from dirt and dust. 

THE COVERS ARE MADE TO FIT CENTER CONSOLE BOATS WITH FIXED POSITION T TOPS.

WE OFFER A FULL LINE OF T TOP COVERS LISTED BY SIZE AND PRICE.  INDIVIDUAL SIZES ARE SEWN IN ONE FOOT INCREMENTS TO FIT BOATS FROM 17'5" TO 26'5" IN LENGTH.

THIS IS A TRAILERABLE COVER MADE IN AMERICA BACKED BY A 5 YEAR WARRANTY ! The cover includes a 80 ft. roll of 1 inch nylon tie down strap that tighten and secure the cover to the trailer frame. You may want to add a second 80 ft. roll of nylon strap for $12. The cover is made of an acrylic coated polyester fabric that is breathable and good for all climates. It is mildew and UV resistant and has 5 Year Limited Warranty by TAYLOR MADE PRODUCTS.

SEWN IN SEVEN COLORS

Pacific Blue	Teal	Cranberry

                  Navy                             Black                   Hunter Green                   Gray

WE’LL NEED TO KNOW:                                                                                                                                                                                        1. The true Center Line Length. 2. The color you want.  3. If you have high bow rails.  4. Information about your engine/s and how they are mounted.

HOW TO MEASURE TRUE CENTER LINE LENGTH: Measure from the transom to the back side of the console, measure the console body, measure from the front of the console body to the tip of the bow, ( include the bow pulpit if any ). The three measurements will give us an accurate Center Line Length for your new cover.

CHOOSE YOUR COLOR:

DO YOU HAVE HIGH BOW RAILS?                                                                                                                                                                 ( 10 INCHES OR MORE ).

ENGINES AND MOUNTING:                                                                                                                                                                                                                  FOR OUTBOARDS MOUNTED ON THE TRANSOM: Do you have a single outboard? B. Do you have two outboards? If you have two engines we need to know the distance from the corner of your transom to the side of one of your engines cowl, (cover). TELL US IF YOUR OUTBOARD/S ARE MOUNTED TO AN BRACKET ATTACHED TO THE REAR OF THE TRANSOM OR IF YOU HAVE AN INBOARD ENGINE ).                

OPTIONAL OUTBOARD COVERS: If you want to add an optional matching outboard cover/s, we will need to know: 1. The length,( front To rear ). 2. The width, ( side to side at the widest point ). 3. The height of your removable power head cover, ( how tall when the power head cover is removed from the engine ).

TIE DOWN STRAPS: The covers includes an 80 ft. roll of 1in. braided nylon tie down strap. Consider ordering an another roll for 12 additional dollars.

MAXIMUM BEAM WIDTH IS 102 INCHES, ( 8.5 Ft. ), FOR ALL COVERS.

QUESTIONS? CALL 813 2401617

DELIVERY: STANDARD DELIVERY IS FOR THE CONTIGUOUS 48 US STATES. WE CAN ARRANGE, ( AT EXTRA COST ), FOR DELIVERY TO CANADA, HAWAII, ALASKA  AND US POSSESSIONS OUTSIDE OF THE CONTIGUOUS 48 STATES. CALL FOR ESTIMATES.  

DELIVERY TIMES: Every cover is individually sewn to order at the Taylor Made  factory in Gloversville NY. Within 24 hours of the time that the buyers boat information is delivered to the seller, a sewing order will be sent to the Taylor Made factory. The covers usually ship within 5 to 8 working days.  UPS Ground Delivery time generally takes another 4 to 6 days. THIS ITEM WILL BE MADE TO ORDER! If the time needed to sew and deliver a new Taylor Made T Top boat cover is not acceptable, please let me know and I will refund your money.