Proper Break-In Procedure for Steel or Cast Iron Rotors
New steel/iron rotors should be bedded in before being used in racing conditions. Proper bedding will prepare the rotor surface, prolong the rotor's life, and make it more resistant to thermal checking or cracking under severe braking conditions. The following procedures should be performed when bedding in both steel and cast iron rotors. It is best to bed in a new rotor using a used set of pads, preferably ones which will not create heat rapidly. Generating heat too rapidly will thermal shock the rotors. Likewise, when bedding in a new set of brake pads it is best to perform the process on a used rotor. This new/used bedding process permits controlled bedding of each individual component.
Make sure rotor surfaces are free from oils, grease, and brake fluid. Run vehicle up to a moderate speed and make several medium deceleration stops to heat up the rotor slowly. This will help reduce the chance of thermal shock caused by uneven heating of the rotor. Pull into the pits and allow the rotor to cool to ambient air temperature. Care should be taken not to ride the brakes into the pits as this may hot spot the rotor causing premature wear to the surface or structural damage.
These scalloped iron brake rotors provide effective lightweight options for sprints, late models, modifieds, and other competition applications that race in low to medium temperature ranges. Steel rotors are typically found in lighter weight open wheel cars such as sprints and modifieds. Speedways premium 11.75" x .810" drilled scalloped brake rotor weighs only 5.07 lbs.
- Scallop configuration provides greatest weight reduction on a vented straight vane iron rotor
- Scallop machining removes as much as three pounds, or nearly 33% of the rotor mass
- Vented castings provide increased cooling capacity over machined steel plate rotors
- Improved structural durability over drilled rotor designs
- Vented iron
- Inboard mounted (Sprints)
Note: Suitable for Light Dirt Racing applications. Scalloped Rotors are unsafe for street use.
Item Details
.810 x 11.758 x 7" B.C.
- Thickness: 0.81"
- O.D.: 11.75"
- Bolt Circle: 8 x 7"
- Threads: Thru
- Weight: 5.07 lbs
- Face: drilled & scalloped
Quality product
Summary: Thanks for the quick service
Yes, I recommend this product.
Quality rotor
Summary: Nice, light high quality rear brake rotor. Have bought 2 already, no problems at all. Will buy again.
Yes, I recommend this product.
Shipping Policy:
- Please pay for all items at the same time.
- If shipping rates do not combine properly, contact us or send a buyer requested total.
- You must contact us before making payment to combine your items.
- Failure to do so will result in separate shipping fees for each individual item.
- We cannot combine your order if you have already paid.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS. All exchanges need to have reshipping charges included.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, video tapes, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
- Accepted Payment Methods - PayPal and major credit cards are accepted. Sales tax at 7% will apply for customers in Nebraska & Indiana. Sales tax of 8.7% will apply to customers in WA.
- Terms - Payment is required before shipment and must be received within seven (7) days.
