car

200 Degree FAN THERMOSTAT KIT TEMP SENSOR TEMPERATURE Switch 50 AMP RELAY KIT

ALL ITEMS PICTURED ABOVE INCLUDED:
- 50 AMP Relay
- 48" of Wiring 12-18 GAUGE
- Temperature Sensor, It is a 3/8" pipe thread.
- Circuit Breaker
- Assorted Connectors And Terminals

COMES ON AT 200º AND TURNS OFF AT 185º

FITS 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 351W 347 352 360 390 406 427 428 429 460 351C 351M 400M 273 318 340 360 361 383 400 413 426W 440 455 330 326 ENGINES

THIS KIT IS A MUST HAVE WHEN USING AN ELECTRIC FAN IN YOUR HOT ROD OR STREET ROD

FITS MOST HOT RODS AND CLASSICS ENGINES INCLUDING GM (CHEVY, GMC, OLDS, CADILLAC, PONTIAC, BUICK, FORD, & MOPAR (CHRYSLER, DODGE, PLYMOUTH) PLEASE MEASURE TO MAKE SURE THIS IS THE RIGHT SIZE AS WE ALSO HAVE 7" 10"12"14"16" ELECTRIC FANS AVAILABLE IN OUR EBAY STORE.

WORKS WITH ALL OF OUR FANS. SEE OUR OTHER LISTINGS FOR ELECTRIC FAN ACCESSORIES

Instructions:

Note:For the two red wires,please connect the short red wire to the fan and the long red wire to the battery.

1.Mount the relay under the hood in a convenient location as to the fan as possible.

Notice:Don't use the teflon tape or thread compoud on the thermostat or adaptor.For proper operation,the thermostat must ground threough the threads to the engine and the engine must be ground.

2.Install thermostat into the head or intake manifold.Route the black wire to thermostat and cut to length.Crimp the red terminal onto the black wire and attach to thermostat.

3.Route and connect the red wire to the fan "+" terminal or power wire coming from the fan motor printed "to electric fan".

4.Mount the circuit breaker provided in a convenient location as close as possible to whichever power source(battery or large terminal on the starter solenoid)you are using for the fan relay.

5.Neatly route the red wire from the relay to one side circuit breaker installed in step 5. Cut to length and install using a small yellow ring terminal .With another small yellow ring terminal take the remaining red wire and connect the unused post on the circuit breaker to the battery source.This wire is printed"to battery/constant hot"

6.Route the brown wire to the ignition switch or the fan switch whichever is more convenient.

instruction of cooling fan relay kit

1. Payments must be receievd within 4 days of purchase.

2. We accept payment via PAYPAL only.

3.8% sales tax will be added for California buyers.

4.The customer assumes all obligations with respect to sales tax of any type applicable to the purchase of the product, and indemnifies the vendor with respect to such obligations.

5. If you have any problems, please click "Ask a Question" at the bottom of this page.

1. A professional installation is always recommended. we do not repair or replace items with an expired warranty.

2. 90 3. 30 Day Money Back Guarantee if not delivered.

3. You agree to all of the above-listed policies upon bidding on and winning this auction!

1. All items will ship within 24 hours, all orders placed before 1 PM (Monday~Friday) will be shipped on same day.

2. We only ship to confirmed PAYPAL addresse.

3. We do not offer change address service after paid. Please contact carrier for help. And additional cost due to wrong address will be covered by buyer.

4. Service transit time is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.

5. We send to 48 main states only through Fedex or USPS.

6. Shipping is out of control, we appreciate any message contacting before feedback or resolution center case if package not received.

1. Please check actual stock part size before purchasing replacements. Compatibility list on eBay listing is not a complete list and it is a known issue that there are errors on it.

2.If you encounter model/functional compatibility issue, please contact us for assistance. We will help you exchange to compatible item (if available).

1. You can contact us in 7 days and return it in 10 days from the date it was received. If exceed 7 days, it is considered used and we will not offrt refund or replacement. There are NO EXCEPTIONS!

2. Return without RA# must include eBay user ID/ specific reason.

3. Buyer is responsible for both return and resend shipping cost when exchanging an item. When return for refund, we will deduct 20% restocking fee.

4. We will cover resend shipping cost if compatibility problem is directly caused by incorrect information on listing. When return for refund, no restocking fee will be charged.

5. Return due to buyer's mistake is acceptable, but buyer should pay for return cost and 20% restocking fee of paid price.

6. Any repair/testing cost is at buyer's part.

1. If you have any problems with payment, please click "Ask a Question" at the bottom of this page.

2. Scan the two-dimension code at packing list.

1. We give positive feedback immediately after payment is received.

2. Negative feedback will not help resolve any problems you have, please contact us via eBay messages before leaving negative feedback. Our customer service will make best effort to help you with the issues.