MoTeC’s new 30 output Power Distribution Module (PDM30) is designed to provide electronically switched power to the various electrical systems in the vehicle such as motors, lights and solenoids, and electronic devices such as ECUs and data acquisition systems.
The module replaces conventional relays, fuses and circuit breakers, simplifying wiring and reducing weight, while increasing reliability.
BASIC SPECIFICATIONS
Outputs
• 8 x 20 A outputs—20 A continuous, 115 A transient (typical)
• 22 x 8 A outputs—8 A continuous, 60 A transient (typical)
Inputs
• 16 x Switch inputs
Communications
• 1 x CAN
Diagnostic Information
• Output current and voltages
• Input voltages
• Error status
Physical
• Connectors:
- 1 x 34 pin waterproof connector
- 1 x 26 pin waterproof connector
- 1 x M6 stud
• Case size 108 x 128 x 39 mm
• Weight 270 gram
|
General Features
• Each output is over-current, short circuit and thermal overload protected
• Outputs programmable in 1 A steps
• Outputs controllable via a combination of switch inputs, CAN messages and logic functions
• Switch inputs ranging from 0 to 51 V, resolution 0.2 V
• Performing up to 200 logic operations using operators like Flash, Pulse, Set/Reset, Hysteresis, Toggle, And, Or, Less than, Greater than, Not equal to, Equal to, True, False etc.
• Performing functions such as flashing indicator lights and controlling thermofan and fuel pump
• Using logic functions to selectively turn off systems during low battery voltage or engine starting, reducing drain on the battery
• Providing full diagnostic information, including output currents and voltages, input voltages, and error status
• Transmitting diagnostic information via CAN to a display or data logging device or monitoring directly on a PC
|
PDM Manager Software
This Windows-based fully updatable software is user-friendly with an intuitive menu structure and extensive help screens.
To access the newest features you can download the latest version from Motec.com.
PDM Manager is used for:
• Configuration of all inputs, outputs, CAN messages and conditions
• Monitoring of all channel values including:
- Input Status
- Input Voltage
- Output Status
- Output Currents
- Output Voltage
- Diagnostics
- Internal Temperature
- Battery Voltage
- Total Current
- CAN messages
- Conditions
• Output testing
• Firmware updating
|
Communication Cables
A communication cable is required to connect a PC to the PDM. The MoTeC UTC (USB to CAN) adaptor should be used to connect the PDM to the USB port on the computer.
Wiring
To install a PDM in your application, MoTeC can supply all necessary connectors, pins and seals, wire and glue heatshrink.
|
MoTeC’s professional, race-grade electronics are sophisticated and therefore it is highly recommended that installation is performed by a professional installer. It is NOT advised for the average installer. An advanced understanding of electrical systems is necessary. Fischer Motorsports will support all sales and also offers professional grade wiring harnesses and installation services for all applications. We have 10+ years of professional race experience based upon MoTeC control and specialize in Power train, Chassis, Drivetrain, and Data programming both at our facilities, onsite customer dyno/track support, or even remote support. Please remember that if you cannot find the time or finances to do the job right the first time, you will ultimately end up looking for time or funds to do it over again. Select us or find a qualified installer, it will ultimately increase your results and minimize future expenses or downtime related to improper setup or installation.
|
|
PAYMENT - SHIPPING - RETURNS
|
|
We Accept The Following Forms of Payment
For fast shipments, please pay for the item after purchase. For Buyer/Seller protection, we will only ship to CONFIRMED addresses. Please, SERIOUS buyers only!
Shipping
Most of our items ship same day. If we expect an item to take longer than three business days to ship we will let you know. International shipments may take up to five business days to ship.
Please see the eBay shipping calculator for an exact shipping quote to your location.
We use UPS Ground for quick domestic delivery with tracking numbers.
PLEASE CONTACT US BEFORE BUYING FOR INTERNATIONAL SHIPPING APPROVAL. We will gladly combine shipping for multiple items!
Returns
All sales are final. None of our items are returnable or refundable unless approved by Fischer Motorsports.
A Return Authorization may be issued in certain cases where Fischer Motorsports authorizes a return, refund or exchange. All returns and cancellations will be charged a 20% re-stocking fee. You must contact us via email and request for your case to be reviewed.
RA numbers expire 15 days after they are issued. Items returned without an RA number or using an expired RA number will be refused.
|
Please Visit Our eBay Store Or Contact Us For All Your MoTeC Needs
|
|
|
|
