Bracket sets available for

216 and early 235 inline 6

-and-

Late 235 and 261 inline 6 with or without motor mount

My brackets are used to mount a Saginaw "canned ham" style power steering pump in the original location of the generator/alternator and position a Delco 10SI alternator above the power steering pump. A power steering pump with a dual groove power steering pump pulley is required as well as 2 belts. The first belt, driven by the crank pulley drives both the p/s pump and water pump/cooling fan. The second belt drives the alternator using the second groove on the p/s pump pulley. A dual groove crank shaft pulley is NOT required. This kit should work however, with a dual groove crank pulley setup. It is possible to use a generator instead of a alternator with this setup.

Works with stock intake and exhaust manifolds as well as many other aftermarket manifolds. 

Comes with the following:

- Power steering pump bracket w/ mounting hardware

- Alternator bracket w/ mounting hardware and 2 head bolt studs (which are required in order to mount the bracket)

- Belt adjuster brackets for both the alternator and p/s pump w/ mounting hardware

***does not include alternator, power steering pump or pulleys***

Requires a Delco 10SI alternator, and Saginaw "canned ham" power steering pump with a dual groove pulley. 

Please send me a message after purchasing letting me know which year and size engine the brackets are for.

I began making these brackets back in 2009 for my 54 235. I quickly realized the want for bracket sets to mount a power steering pump to the 216 and early 235 as well as the later 235 and 261 and designed a complete set for both. Since then I have sold over 60 sets, many to customers in the USA but also to Mexico and Canada.