Ingenious design completely eliminates the throttle pipe and housing. Converts the end of the handlebar into a single cable throttle. The throttle cable is routed through the bar so all components are hidden from view. For custom motorcycles only.
For 1" bars.
For custom motorcycles only. Requires cutting the right bar end to install
Installation :
Before installing your internal throttle assembly you will need to cut and remove 3.940 off of the handlebar end on the throttle side. You will then need to drill a hole for the throttle cable to exit the handlebars near the center of the triple trees (most handlebars are already pre-drilled for wiring purposes). Keep in mind that the throttle cable should not get kinked and should exit the handlebars in a manner that will allow it to function smoothly. It is also recommended that all moving parts in the throttle assembly should be lightly coated with bearing grease and the throttle cable should be oiled with the proper lubricant. Some carburetors may require an in-line cable adjuster to achieve full throttle at the carb.
After shortening the handlebars you will then need to drill a 13/64 hole for the set screw. Drill the hole 1.495 from the bar end. Drilling the bar from the underside is recommended for a cleaner appearance.
After the handlebars are prepped and ready, insert throttle cable through the hole in the handlebar until the cable comes out at the throttle end. Remove the end cap screw from the outer sleeve. Remove the outer sleeve completely by rotating clockwise. Do not lose the rollers. Due to variations in the rollers install in the same order they are removed. Once the outer sleeve is removed, slide the rollers away from the set screw. Locate the set screw on the inner sleeve. Insert throttle cable end into the slider then tighten the set screw using a small amount of blue loctite (medium strength). Re-assemble the throttle control. Insert the inner sleeve into the handlebar end. Align the set screw holes. Tighten set screw until flush with the handlebar using blue loctite (medium strength).
Retail . . . . . .$283.99
Brand New in the Package
All of Our Items are in Stock, Ready to Ship.
For More Information about Demon's Cycle and Our Products,
Make Sure To Visit "ABOUT ME" Page
DEAR CUSTOMER:
If you don't see a product you are looking for please call us 954-943-0000 9am to 6pm EST
and will be happy to direct you to a proper eBay listing.
We spend more time on the phone answering questions, than we do building bikes
and filling your orders.
We ask all customers to respect our time and read the written description closely
prior to calling for answers which is already in the ads. (PLEASE READ THE AD
2 TIMES BEFORE CALLING).
Thank you for your courtesy!
Our customers get Priority Processing and same business day FedEx shipping. Please use the shipping calculator above and make sure to enter your zip or postal code to get actual FedEx shipping cost to your location. We ship FedEx only and we only charge actual shipping cost.
For tracking information or if you have any problems calculating shipping, please don't hesitate to contact us.
We ship within 48 hours from the time we receive the payment to insure fast delivery. We use FedEx as our main carrier and due to their policies cannot deliver to P.O.Box or APO address'.
Shipping discount on multiple items is applied automatically. All items shipped are the full and complete responsibility of the shipper and are not of the seller once the item has left the premises of the seller. All invoices over $250 must have Signature Confirmation due to Paypal's policies.
Sales Tax
Sales Tax is applicable in the following state: Florida.
Payment
We accept and prefer PayPal. We also accept VISA, Mastercard, and Discover on our secure web server.
Return Policy
This Product comes in Factory Sealed box with full Manufacturers Warranty. Demon's Cycle Inc. is a Authorized Titanium dealer.
No returns will be accepted without the express authorization from the Co. Any item returned is subject to a 19% handling/restocking fee. Shipping expenses cannot be reimbursed. No returns on electrical parts for any reason whatsoever. Items purchased that have been mounted/applied/used in any way are not returnable for any and all reasons whatsoever. No returns are accepted after 30 days from the date of purchase.
Contact Us
Main phone line: 954-943-0000 Fax: 954-943-0377
Demon's Cycle Inc. 1407 SW 10th Ave. Pompano Beach, FL 33069
At Demon's Cycle our goal is to provide you exceptional and great customer service. If you have any questions, concerns, or need someone to talk to feel free to give us a call. There are several ways to contact us daily. If you wish to speak with a Demon's cycle customer service person you can reach us by phone at 954 943 0000 during our business hours, Monday thru Friday from 9:00 am to 6:00 pm Florida Time.
You can contact us through eBay "Ask a question" link on the bottom of the page. You can also reach us by mail or visit us at: Demon's Cycle 1407 SW 10th Ave, Pompano Beach, sunny South Florida, 33069. Our customer service professionals work their hardest and best to answer all of your questions. Many questions or requests require research or technical assistance so we ask that you allow us 1-2 business days to answer your questions. If you still have not heard a response from us you may want to check your spam filter for blocked email.
Thanks your Demon's Cycle team.
About Us
Demon's Cycle Inc.
We focus on sales of the finest custom motorcycle parts. Utilizing our tremendous
buying power, we are able to sell to the public at prices below dealer cost.
For More Information about Demon's Cycle and Our Products,
Make Sure To Visit "ABOUT ME" Page
