America's Oldest Speed Shop® Lincoln, NE 855.682.4406
BluePrint Engines H8002S Muscle Series Small Block Chevy Aluminum Head BluePrint Engines
BluePrint Engines H8002S Muscle Series Small Block Chevy Aluminum Head
Sku # 9108002
Mfr. Part # H8002S
Condition
New
Brand
BluePrint Engines
Sold
Each
BluePrint Engines H8002S Muscle Series Small Block Chevy Aluminum Head BluePrint Engines H8002S Muscle Series Small Block Chevy Aluminum Head BluePrint Engines H8002S Muscle Series Small Block Chevy Aluminum Head BluePrint Engines H8002S Muscle Series Small Block Chevy Aluminum Head BluePrint Engines H8002S Muscle Series Small Block Chevy Aluminum Head BluePrint Engines H8002S Muscle Series Small Block Chevy Aluminum Head BluePrint Engines H8002S Muscle Series Small Block Chevy Aluminum Head
Details
Notes
  1. Will Accept Either An Early 12 Bolt Intake Manifold Or Late "Vortec" 8 Bolt Manifold
  2. Straight Spark Plug Holes Use A .750" Reach Gasket Style Plug
  3. Perimeter or Center Bolt Valve Cover Bolt Holes
  4. Accessory Bolt Holes Machined On Ends Of Heads
Info

Bolt 'em on and grip the wheel tight! Get big power on a small budget with BluePrint Muscle Series cylinder heads! These lightweight aluminum heads bolt up to your small block Chevy and feature 195cc intake/75cc exhaust runners, 64cc combustion chambers, and 2.02" intake/1.60" exhaust valves. They're fully assembled with valve springs, retainers, locks, guideplates, studs, and seals.

  • Maximum output for less money
  • Designed and produced by BluePrint Engines
  • Fully assembled with heavy duty components
  • Great for hydraulic roller or large flat tappet street cams
  • Same head as featured on our exclusive BluePrint 383 Roller Crate Engine
  • Backed by a full 12-month limited warranty

Features include:

  • 195cc intake runners
  • 75cc exhaust runners
  • 2.02” and 1.60” stainless steel valves
  • Valves are swirl polished w/ undercut stems
  • Ultra street performance 1.437” springs for up to .575” lift
  • 115-125 lb seat pressure
  • 295-305 lb open pressure
  • Chromemoly retainers w/ 7 degree valve locks
  • 3⁄8”screw in studs and guideplates
  • Straight plug
  • 64cc combustion chamber
  • 3-angle valve job
  • Chrome nickel valve seats for unleaded fuels
  • Viton® fluoroelastomer valve stem seals
  • Manganese bronze guides

910-8002 Instructions (PDF)

Specs

Intake

CFM Port Flow Average @ 28"
.100" - 83
.200" - 150
.300" - 190
.400" - 223
.500" - 252
.600" - 245

Exhaust

CFM Port Flow Average @ 28"
.100" - 83
.200" - 130
.300" - 166
.400" - 193
.500" - 207
.600" - 213

Specs
Material Type
Aluminum
Sold in Quantity
Each
Finish
Natural
Cylinder Head Style
Assembled
Spark Plug Style
Straight
Port Style
Square Port
Combustion Chamber
64cc
Notes
Open pressure is 295-305 lb.
MFG
Intake Runners
195cc
Exhaust Runners
75cc
Stud Diameter
.38
Intake Valve Diameter
2.02
Exhaust Valve Diameter
1.60
Spring Diameter
1.437
Related Items / Suggested Parts
Flo-Tek 102505 Assembled S/B Chevy Aluminum Head, Straight Plug
Flo-Tek 102505 Assembled S/B Chevy Aluminum Head, Straight Plug
Champion 794 C61YC 14mm Racing Spark Plug-.75 Reach-5/8 Hex-61 Heat
Champion 794 C61YC 14mm Racing Spark Plug-.75 Reach-5/8 Hex-61 Heat
Fel-Pro P1010 S/B Chevy 265-400 Copper Ring Head Gasket 4.166 In. Bore
Fel-Pro P1010 S/B Chevy 265-400 Copper Ring Head Gasket 4.166 In. Bore
Fel-Pro Gaskets 1205 S/B Chevy Intake Manifold Gaskets, 1.28x2.09 Inch
Fel-Pro Gaskets 1205 S/B Chevy Intake Manifold Gaskets, 1.28x2.09 Inch
Shipping

Shipping Policy:

  • Please pay for all items at the same time.
  • If shipping rates do not combine properly, contact us or send a buyer requested total.
  • You must contact us before making payment to combine your items.
  • Failure to do so will result in separate shipping fees for each individual item.
  • We cannot combine your order if you have already paid.
Some products are too large for standard ground delivery and must be shipped via truck freight. When possible, please provide a business or commercial address for delivery to eliminate additional fees. Please ensure the phone number provided is accurate to avoid delays. Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
Not sure this part will fit? Call us Toll Free at 855.682.4406 M-F 8am-5pm CST for support from our knowledgeable techs!
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 58 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 30 days after you receive your shipment and you are not satisfied, you may return the item for a refund or an exchange. Refunds will be processed (1) day after the item is received by Speedway. All exchanged or returned merchandise must be in original factory condition with no modifications or alterations.

Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS. All exchanges need to have reshipping charges included.

All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, video tapes, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
  • Accepted Payment Methods - PayPal and major credit cards are accepted. Sales tax at 7% will apply for customers in Nebraska & Indiana. Sales tax of 8.7% will apply to customers in WA.
  • Terms - Payment is required before shipment and must be received within seven (7) days.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, the customer will be refunded in full or sent the correct item at no additional cost.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.