Output voltage: 6V / 12V
Output current: 0.5-0.6A (Max 9A)
Fit for battery: 1AH ~ 12AH
Weight: 1kg
Size: L*W*H=19*12.5*8.5CM
Application: Fit for various motorcycle battery of charging voltage 6 v, 12V; The charging current suit for 1 AH ~ 12 AH battery capacity which used in most motorcycle.
Usage: Solve the problem of inadequate battery volume
Important notes:
1, Output wires, red to battery positive, green to batery negative, do not reverse, important!
2, Never connect the red wire to green, short circuit will damage this device.
3, Device input charging voltage range between 220 v and 230 v.
4, When charging, the battery fluid need to be adequate. Generally, battery fluid level should exceed the counter electrode, but should be overmuch either, within the range of battery requirements, loosen each covering cap, don't tighten when charging.
5, For fast charging, you can raise the current. In the process of charging if the battery body abnormally heat and temperature rise more than 10 degrees, please reduce current or stop charging. After cooling charge with small current. This is good for extending battery service life.
6, in the process of charging, it's normal that current decreased, no need to adjust it.
7, Fuse should be replaced according to the original one, don't arbitrarily change with different ones or use copper wire.
8, It's recommended to measure battery volume with battery tester, to determine whether it's charging full.
9, When charging, please handle in good ventilation, where is dry without dust, away from the corrosive gas (such as sulfuric acid, electricity Liquid pool, etc.).