As Seen On Stacey David's Gearz TV and Two Guys Garage
The V12 DIY is the most economical way to get the best possible brake or clutch pedal, guaranteed!
The V12 DIY contains the bare minimum of accessories to perform Reverse Bleeding and all other Phoenix Systems bleeding methods. We designed the DIY to allow home users to achieve professional results, economically. There is no other method or tool that remove more air than a Phoenix Bleeder, so the only way you'll know if you have the best possible brake or clutch response is to use the tool.
"End those “white knuckle” panic stopsin a few short minutes"
Stop 20 feet shorter with
Phoenix Systems’ “Reverse” Brake Bleeder
NOTICE: This is the new Phoenix Systems V12 DIY Reverse Bleeder with multiple enhancements and new accessories.
All Ebay Auctions are for tools with cosmetic defects or are remanufactured units.
VERY limited quantities available
For Perfect Tools see www.brakebleeder.com Click here
Watch the Stacey David Gearz video at the bottom of the page to see the Phoenix Reverse Bleeders in Action
Air in your brake lines not only takes away
the ability to stop quickly, it can increase your stopping distance by up to 20
feet. That’s pretty serious
when a child runs out in front of you or somebody slams on their brakes!The Phoenix V12 DIY brake bleeder is the ONLY way to ensure near ZERO air in your brake system.This tool uses patented reverse bleeding technology, and harnesses the
principle that air wants to go up (and out) thru the master cylinder, instead of
down through the calipers.This simple technique guarantees the easiest,and fastest form of air removal.
Another thing that makes the
Phoenix V12 the ultimate brake bleeding tool is it can also perform any
combination of reverse bleeding, pressure bleeding, or vacuum bleeding for the
best possible bleed. That means you can handle any hydraulic bleeding project, since usually a combination of bleeding techniques provides the best results. It’s
also perfect for bench bleeding and making short work of those “impossible to bleed” hydraulic
clutches.
"The Phoenix V12 DIY brake
bleeder will put an end to those “white knuckle” panic stops, and in a few short
minutes, you’ll have the best, firmest pedal that you can get and it’s
something one guy can do. The V12 DIY will make your life a whole lot easier, and that is what a good tool is
supposed to do." Stacey David, Stacey David's Gearz TV
Phoenix
Systems Reverse Brake Bleeders 1 man + 10 minutes = 1 rock hard
pedal
With
Phoenix, one man can bleed the brakes on any vehicle in 10 minutes or less –
even if it’s a tough ABS job (you won't won’t need a scan tool or special clips).
Even if it’s Ford Ranger clutch (know what we mean?)
The World s Simplest,
Fastest and Most Efficient Way To Bleed Clutch and Brake Systems...Even ABS !
One person. One Tool. Ten minutes. Phoenix Systems patented technology
eliminates
difficult bleeding. Never again spend hours attempting to get a firm
clutch or brake pedal! It doesn t require electricity or
compressed air,
allowing even the weekend mechanic to bleed like the pros. Even the
toughest of brakes and clutches, such as those found on Ford Rangers,
Jeeps, or GM trucks, can be effortlessly bled in minutes with the
Phoenix Bleeder.
LIST
PRICE $79- You Save $$$ at the Buy
It Now Price
These are professional tools, approved by General Motors, US Military and
much more... The V12-205 Phoenix brake bleeder is the best brake
and clutch bleeder offered by Phoenix Systems.
What
You Are Bidding On
New Model V12 DIY Phoenix Reverse Bleeder- Refurbished w/ 90 day warranty
Brake bleeder adapter kit
Quick-couple connections
Users manual
Universal bottle adapter
Buy It Now will receive training video or DVD $29.99 value
Please Do Not Confuse the Phoenix line of brake bleeders with
the "mity" type vacuum only brake bleeders. If you buy one of those you
mity not get all the air out.
Secret
Behind the Phoenix Reverse Brake Bleeder
Which way do the bubbles go in
your
soda? UP!
That's the secret behind Reverse Bleeding. Inject the
brake fluid at the low point, the bleeder valve and push the air UP and out the master cylinder
reservoir. Reverse Bleeding is so simple and so unique it's patented. Traditional
bleeding methods attempt push the air DOWN
and that is why some brake and clutch systems are so difficult to
bleed, the air is trapped and won't go down.
TOP
10 Reasons to Buy:
Own the World's Best Brake and Clutch Bleeder
Save $ for minor cosmetic defects
One man operation
Bleed Ford Ranger clutch in 10 minutes
Use all known bleeding techniques
Bench bleed master cylinders
Last for years, all wear parts are rebuilable
Full factory warranty
Works on all vehicles
Doesn't require special adapters, tools or clips that run
in the
$1000's
Just listen to what our customers have to say:
I just did in five minutes what I couldn t do in five hours! Kurt Giventer
Not (any) one bleeding method is the best for the many types of
hydraulic systems... The Phoenix
Bleeder offers the technician a choice of which method to use. Bill Williams, WISAT
My 68 Chevelle had a soft pedal... After bleeding it with the Phoenix Bleeder I had to learn how to drive my car again because of the
difference in pedal firmness and response. Ron Gibbar, Arizona Fluid
Power
I Love This Tool! Tony Lux, ABS Brake
Hotline
Specialist
The Phoenix Reverse Bleeder is suited for multiple
uses including Reverse, vacuum bleeding, pressure bleeding, bench
bleeding... and more.
NOTE: The Flashlight mount and flashlight is an optional accessory and NOT included
The new Phoenix “reverse” brake bleeders are guaranteed to obliterate trapped air transforming slow, weak and mushy brake pedals into the quickest and safest brake pedal response possible... Yes, removing trapped air means you can stop shorter.
This pro quality tool is engineered to eliminate even the most minute trapped air in any auto hydraulic brake system regardless of brake fluid type. One man can bleed can bleed the brakes on any vehicle in 10 minutes or less – even tough ABS. It features patented Phoenix “reverse bleed” technology that is used every day by US military technicians, GM dealers and national brake repair chains.
The Phoenix Reverse Bleeders harness the obvious principle that air wants to go up and guarantees easier, faster and better results for brake bleeding, master cylinder bench bleeding, even bleeding hydraulic clutch systems.
“Reverse” Brake Bleeder Obliterates Trapped Air . . . Gets Fast Pedal Response Every Time . . . Makes Even “Impossible” Brake Jobs Easy
Why do some do-it-yourselfers get rock-hard, ultra responsive brakes every time (even on “impossible” hydraulics like you’ll find on race cars) while everybody else has to settle for a mushy, weak pedal?
Three words for you . . . “compressible trapped air.”
Pros have known for years that trapped air kills the response of even high end brake system . . . and leave your brake or clutch assembly mushy, weak and dangerous.
So how do the pros obliterate trapped air, make sure every brake system performs to its top potential and get a rock-hard pedal every time? By using the best tools for the job.
The Secret Weapon Used By Pros
For years now the “reverse” brake bleeders from Phoenix Brake Systems have been the “Secret Weapon” behind the rock-hard pedal response of everybody from General Motors, to national chain brake shops, to the US Military . . . (In fact the Army recently decided to rely on Phoenix’s top level bleeder as standard equipment for service on vehicles in the USA as well as Afghanistan and Iraq. )
Why? Because Phoenix’s Brake Tools Help You Obliterate Trapped Air Fast And Get Maximum Response Out Of Your Brake System . . . Guaranteed!
Is Trapped Air Killing The Response Of Your Brake Pedal Or Clutch System? With Phoenix System’s “Reverse” Brake Bleeder You Can Obliterate Trapped Air In Minutes And Stop Faster
“After using Phoenix System’s Reverse Brake Bleeder I had to learn how to drive my 66 Chevelle all over again because of the difference in pedal response and firmness.” - Ron Gibbar Arizona Fluid Power
Performs All Known Bleeding Methods and Works with All Brake Fluids
The easy-to-use Phoenix Reverse Bleeders are designed to work with all types of brake fluids, including D.O.T. 3,4, 5 and synthetic blends . . . provides up to 125 PSI with comfortable hand force and lets you perform Reverse, vacuum/pressure bleeding and master cylinder bench bleeding faster, easier and with better results than any other bleeder on the market.
What Makes The Phoenix Reverse Bleeders So Powerful, So Acclaimed And So Effective?
Phoenix's patented design allows you to easily “Bleed” air out of your brake or clutch system. Why is that important? Because as pros have know for years and years, compressible trapped air kills brake pedal and clutch response . . . rendering even high end brake system weak and mushy and turning “average” brakes downright dangerous.
By “bleeding” air out of your brake system, the Phoenix Bleeders give you the fastest possible pedal response every time . . . meaning better performance for your vehicles and safety for you, your family and your friends.
Military Proven
Need more proof that Phoenix Brake Tools are the “Real Deal?” We don’t like to brag, but we think the fact that the US Military recently decided to include our top-end brake bleeder (the MaxPro) in its standard SATS kit speaks VOLUMES.
P.P.S. Why do Phoenix Bleeeders give you a “Military Grade” bleed? Because in 2008 the US Military decided to include our Max Pro Brake Bleeder as standard equipment in their SATS kit . . . the standard vehicle service and repair kit military mechanics use in the field each and every day.
You’re Just One Step Away From Obliterating Trapped Air . . . Buy Now!
Use paypal or call 435.673.0777 to pay with a credit card
