SAFEBRAKE™ TEFLON® LINING PRODUCTS IS NOW
AVAILABLE TO UPGRADE YOUR CAR, WITH BRAKE TECHNOLOGY PROVEN IN THE RACING
CARS FROM F-1 TO V8 RACING SERIES.
This listing is specifically for:
SAFEBRAKE™
Teflon® Lining, Performance Brake Hose to fit the following car model and
includes all the brake hose assembly required to replace the
original rubber brake hose in your car.
"Effective brake upgrade, with improved stopping power for your car"
Easier to lock all 4 wheels during steep off-road tactical tracking for 4WD vehicles.
Product Code: TLC-FZJ80.58-TF
Toyota Landcruiser 80 Series FZJ80 1995-1998 Applicable models:Suits Landcruiser FZJ80R/L 1995-1998 'without ABS' with rear discs brake; 1FZ-FE 4.5 L petrol I6; Standard Suspension Height.
Compatible calipers: Standard FZJ80 1995-1998 front and rear calipers. Compatible fluids: DOT 3, DOT 4, DOT 5 (Silicone), DOT 5.1 ( Glycol Ether/Borate Ester)
Includes in the packaging are: Front left axle = 1 hose Front right axle = 1 hose Front chassis to bracket = 1 hose Rear left axle = 1 hose Rear right axle = 1 hose Rear chassis to axle left = 1 hose
Total: 6 hoses kit
+ following documents: - Warranty Card
- Suggestion for Safety
- Limited Warranty (Terms & Condition)
- Installation Suggestion
Installation Note:
This SAFEBRAKE™ brake lines kit is OEM fit, just like your original brake lines.
5 Years Warranty! When you install SAFEBRAKE™ to your
car, you can have a peace of mind knowing that SAFEBRAKE™ is totally
committed to the quality of its products by offering a 5
years warranty program. Details of the Limited Warranty are enclosed in the packaging box.
30 Days
Money Back Guaranteed! Should you change
your mind after making a purchase, if the product is faulty or not as described, NO WORRIES you can return this product and receive your full purchase price minus postage. To qualify, the product must be in
its new, unused condition.
SAFEBRAKE™
Brake hose products are 100% fully compliant with ADR 42/04 Section 15 and
conform to SAA, SAE J1401, BS, JIS, DIN, ISO or ECE standards for flexible
hydraulic brake hose.
√ ADR 42/04
Compliant
√ SAE J1401
Compliant
√ OEM
Specification made according to individual car model hose length and bracket
position
√ SAFEBRAKE™
Teflon® Hose is Certified ISO 16949:2009 (Automotive OEM Supplier Std)
√ Robust
3.4mm Heavy Wall Teflon® Inner-Lining
√ Braided
with top quality AISI 304/S15 or BS970-1 hard drawn stainless steel wires
√ Every hose
is tested to 3,500 psi
Hose Construction
SAFEBRAKE™
brake hose is designed with robust 3.4mm heavy wall Teflon® Inner-Lining
to eliminate hose expansion which affect brake performance. Our hose is
manufactured with 100% pure Teflon® powder supplied by DuPont™ FlouroPolymer
Solutions. The extrusion process utilises the latest technology which results
in consistent wall thickness and inner diameter through-out the whole
hose length.
No pigments
or additives which may
reduce the strength of the hose is added.
The Teflon®
inner-lining is protected and further strengthened with the braiding of fine
stainless steel wires which is constructed in a cross-braiding pattern of
4-wire strands that enhances the strength of the hose. The wires are produced
from high quality AISI 304/S15 or BS970-1 1996 hard drawn tensile stainless
steel.
Extra Protection
To ensure further
protection from weather elements and road debris during the lifespan of the
hose, an external layer of PVC elastomer
(Elastic Polymer) is applied to protect the stainless steel wire
braid.
SAFEBRAKE™ metal
end-fittings are made of high quality alloy steel which are machined with precision utilising the latest
machining technology as required by ISO/TS
16949 (Automotive OEM Supplier Standard). Environmental friendly Zinc coating is used to protect the
end-fittings to ensure long service life and compliance with environmental
protection laws.
SAFEBRAKE™ Key Advantages
Unrivalled flex-life (18 million normal
cycles) for exceptional durability.
Minimal volumetric expansion (hose swelling) due
to 3.4mm Heavy-Wall designed
which results in powerful braking and amazing feel.
Negligible water ingress, meaning brake fluid
is not contaminated and performance is not compromised.
Long service life while maintaining the
same high level of braking performance.
Safer motoring - Improved braking
performance over standard rubber brake hose.
Unrivalled braking performance for track and racing
application, regardless of the size of brake rotors and calipers.
Customers' Feedback
Following are customers'
comment from their experience of using SAFEBRAKE™ brake hose;
Obvious improvement in brake performance of their car, right after
installation.
Helps to reduce overall stopping distance.
Able to reduce the speed of their car more confidently in wet or
dry road condition.
Able to get out of dangerous situation more confidently with
precise brake and vehicle control.
Reduce swerve tendencies during panic or emergency braking, even on
older cars.
SAFEBRAKE™ has over 300 car
models in the application. If you cannot find your car models in the listings,
please email us at customer-service@safebrake.com.au Should you are in trade business and interested to become a dealer, do contact us for details.
Important
Note:
In order for SAFEBRAKE™ products to work properly, car components not limited
to tires, suspension, brake pads, brake disc must be in good working
conditions.
♦
SAFEBRAKE™ Products are developed and designed in Australia by Australian
company.
♦
SAFEBRAKE™ or PRO-RS Australia Pty Ltd. has no affiliation whatsoever with
DuPont™ other than as indirect customer.
♦
DuPont™, Teflon® are registered Trademarks and Trademarks of E.I, du Pont de
Nemours and Company.
♦
Trademarks or commercial tradename mentioned herewith are the rightful property
of their respective owners.
