Shipping
We ship to US addresses within the United States only via UPS, USPS, or LTL Carriers.
No International shipping available.
Most items will be shipped within 24 hours of cleared payment Monday through Friday.
Please allow 2-10 days for delivery. Most areas in the US are within 5 days.
Large items ship via Freight Carrier. Freight items include but are not limited to engines, transmissions, rear axle assemblies, fuel tanks, fenders, doors, bumpers, etc. For freight shipments, the shipping address you provide must be a COMMERCIAL ADDRESS, such as a business with a loading dock or forklift. It is the buyer's responsibility to ensure the location will accept the shipment and can properly unload the part from the tractor trailer. If the location requires the assistance of a lift gate, please contact us first.
We are not responsible for any charges that shipping companies may require for lift gate, redelivery, extended area delivery, etc. We are not responsible for any delays incurred by the shipping carrier. We can also arrange for pick up from the nearest Freight Carrier terminal. Be sure to provide us with all necessary contact information. This includes your name & phone number as well as business name, address, and contact information for delivery. We do not ship until we have all required information.
Pick up at our facilities is available. Please contact us prior to your purchase to arrange pick up.
If an item arrives damaged, please retain all packaging and contact us within 24 hours for instructions.
Warranty
We offer a 6 month part replacement warranty on all parts we sell.
In the event a part sold with a warranty fails to operate within the warranty period we will replace the part(s) with a functionally equivalent part or refund the part purchase price, at our option.
This is a parts only warranty and absolutely no labor charges are covered by this warranty.
Due to the complexity of the following parts, Maughan Auto Salvage places the following additional requirements for any warranty claims to be validated. All parts not specifically stated here are covered by our general 6 month warranty terms.
ENGINES
Covered: All parts of a typical engine long block assembly, including all internal lubricated parts, i.e. rings, pistons, pins, crankshaft and main bearings, the connecting rods, rod bearings, camshaft bearings, timing chain gears, rocker arms, valve springs, valve guides, valve seats, valve push rods, valve lifters, and oil pump.
Covered: Cylinder head(s), engine block and cylinder barrels if damaged solely as a result of the mechanical failure of one or more of the internal lubricated components specified above. Leaking cylinder head gaskets will be covered under this warranty at Maughan Auto Salvage's discretion. We reserve the right to investigate the problem and determine if the problem is covered by this warranty.
Not Covered: Oil and coolant leaks. Accessory items, including, but not limited to: Electrical components of all types (distributor, alternator, all sensors, spark plugs, ignition systems, and electrical or electronic control devices), fuel systems (including carburetors, fuel injection systems, fuel pump, injectors), water pump, thermostat, soft plugs, manifolds, oil pan, valve covers, pollution controls, gaskets, seals, filters, fluids, installation supplies, mounts or linkages, intake manifold, intake manifold gaskets. Any of these items that need to be replaced are the responsibility of the purchaser.
WARRANTY IS VOID IF HEAT TABS ARE MELTED OR REMOVED.
1. REQUIRED: All timing belts must be replaced. Timing chains and all other timing components must be inspected, adjusted and/or replaced as needed per manufacturers specifications. Documentation of this step is required.
2. REQUIRED: The cooling system of the engine assembly must be thoroughly flushed and verified to be in good working order, including radiator and cooling fans. Due to common intake gasket failures, the installer must inspect these and replace at his discretion using manufacturers guidelines and specifications.
3. REQUIRED: External oil coolers and lines must be inspected, flushed, and/or replaced as per manufacturers specifications.
4. REQUIRED: Electronic Brain Boxes (ECU's, PCM's, etc.) must be reprogrammed or flashed by the dealership as needed. Often many issues can be solved with this step.
5. REQUIRED: All Technical Service Bulletins published by the manufacturer of the vehicle/engine must be researched and followed. Documentation of this step is required.
TRANSMISSIONS (STANDARD OR AUTOMATIC) AND TRANSFER CASES
Covered: All internal lubricated parts contained within the transmission or transfer case and the main housing of the transmission or transfer case itself if damaged solely as a result of mechanical failure of one or more of the internal lubricated components contained within the transmission case.
Not Covered: Hydraulic fluid leaks. Accessory items including but not limited to: modulators, governors, electrical controls, linkage or mounts, installation supplies or fluids.
Not Covered: Any transmission or transfer case placed in a vehicle with oversized tires is sold ?as is? with no warranty.
1. REQUIRED: The complete hydraulic system of the transmission or transfer case must be flushed (including the cooler/radiator and cooling lines) and new fluid installed.
2. REQUIRED: A new filter and gasket set, front and rear seals, and o-rings must be installed.
3. REQUIRED: All automatic transmissions must be be installed by a qualified and certified installation shop or warranty will be void. Documentation of certification and installation is required for any warranty claims.
4. REQUIRED: All automatic transmissions must have the torque converter installed per manufacturers specifications.
5. REQUIRED: All automatic transmissions that are electronically operated/shifted must have their electronic control modules reprogrammed, reset, or flashed by the dealership to ensure proper operation. This must be noted on any installation documentation.
6. REQUIRED: If Maughan Auto Salvage supplies the electronic transmission control brain, the customer must use the supplied brain and have it flashed/reprogrammed.
7. REQUIRED: All Technical Service Bulletins published by the manufacturer of the vehicle/transmission must be researched and followed. Documentation of this step is required.
REAR AXLE ASSEMBLIES, CARRIERS, DIFFERENTIALS
Covered: All internal lubricated parts contained within the housing of the rear axle assembly, carrier assembly or differential and the main housing itself if damaged solely as a result of mechanical failure of one or more of the internal lubricated components contained within the housing.
Not Covered: Lubricating fluid leaks. Accessory items including but not limited to: backing plates, all brake system components, electronic/electrical controls, cables, U-joints, shift solenoids, linkage or mounts, installation supplies or fluids.
REQUIRED: The lubricating fluid of the rear axle assembly, carrier assembly or differential must be flushed and new fluid installed. New gasket set and required seals must be installed.
AIR CONDITIONING COMPRESSORS
Covered: All internal lubricated parts contained within the housing of the a/c compressor and the main housing itself if damaged solely as a result of mechanical failure of one or more of the internal lubricated components contained within the housing. The clutch is also covered.
Not Covered: Loss of refrigerant (R12 or R143a). Damage to any system located near the compressor. Installation supplies, mounts, belts, electrical/electronic components.
1. REQUIRED: A/C compressors must be be installed by a qualified and certified installation shop or warranty will be void. ?Home? or ?Shade Tree? installations are not permitted. Documentation of certification and installation is required for any warranty claims.
2. REQUIRED: A new receiver, dryer, and screen must be installed or warranty will be void. This is to prevent any existing contamination from damaging the purchased compressor. Documentation of these purchases is required to validate warranty claim.
AIR BAGS & SEAT BELTS
Supplemental Restraint Airbags and Seat Belts are guaranteed to be functional at the time of installation only. Installation by a certified facility is required.
IMPORTANT! After installation, customer (including the shop and the vehicle owner(s) ) assume all risk and liability associated with the ownership and use of this restraint system. No warranty, expressed, written , or implied exists after the installation of these parts.
ELECTRONIC BRAIN BOXES
All electronic brain boxes that control any function on the vehicle, including but not limited to engine, transmission, ABS systems, audio/visual entertainment, and others, are covered by a 6 month part replacement warranty. We will replace the part before we issue any refund if the one sold on this invoice is proven defective. All electronic brain boxes are required to be reprogrammed (also know as flashing or resetting) by the dealership. This is the buyer's responsibility and proof of programming is required to validate any warranty or return claim.
Help
Will this fit my vehicle? Is this the right part?
This is the most common question that we get. The fitment information can be confusing if you don't buy replacement parts everyday. Please contact us if you are unsure! We try to respond to questions as quickly as possible and we are more than happy to answer any questions as best as we can. In order to speed up the process, it is very helpful, but not required, for you to send us your full VIN number along with your question.
It looks like its the same color as my part, how can I tell for sure?
The best way is to match the manufacturer paint/trim code. Most of the time we include the paint/trim code in our part notes. If you don't know what a paint/trim code is or where yours is located, please feel free to ask. We are happy to help.
I see a wheel that says it is "B" condition, what does that mean?
Grading of parts is a very subjective process but we do our best to keep it uniform. Here is a brief description of wheel grades:
A Condition, A-COND = This is the highest grade used wheel. It will have very minor imperfections but will be in better condition than 90% of vehicles on the road.
B Condition, B-COND = This wheel will have some cosmetic imperfections. It is in average condition for the year and mileage of the donor vehicle. It may have minor scratches and clear coat peeling. This is still a fairly nice looking, used wheel
C Condition, C-COND = This wheel will have very noticeable cosmetic issues. These may include deep scratches, scrapes, major clear coat peeling, and/or some curb rash on the lip. These wheels are still guaranteed to be straight and true, just not the best looking.
How are your parts graded in general?
Here is our standard grading process for all other parts:
A Grade/Above Average: The highest quality used part. "A" parts have less than 60,000 miles OR less than 15,000 miles per year. Example: An 8 year old vehicle with 115,000 miles is still an "A" grade, based on miles per year as long as there is no physical damage.
B Grade/Average: The second quality of used part. "B" parts have average miles and condition for its age. "B" parts have more than 15,000 miles per year of age.
C Grade/Below Average: The third level of quality of a used part. It will have high miles or minor damage.