2016060504562813862
2016060504562813862

Custom Service need Extra! If you need please contact us before bid.

 

This item included:
    2 x Led Car Door Logo Light
    2 x Logo Flim(pic same as eBay Show)
    1 x hole drill 23mm

 

Characteristic:
    Type: Door step light for Multi-logo car
    Light Color: as picture of the item
    Material: Aluminum alloy
    Lamp Type: LED
    Power output: 3W
    Power Supply: DC 12V+/-10%

 

Installation:
    Step one Removing the Door Panel
    * Make sure you are using adequete tools.
    * Snap off the panel located on the inside of the door.
    * Gently disconnect any wiring that may be attached.

 

    Step two: Using the hole Saw
    * Remove the hole saw tool from it's packaging
    * Drill out correct size hole from projector light
    * Ensure even contact between surface and drill

 

    Step three: Wiring to power
    * Connect the red and black wires to power and ground
    * Use proper safety when handling electricity
    * Snap the door panel back on and you're good to go

 

Buyer Notice:
Buyers should ensure this item fit for their vehicles before make an order,it's better that your car lights are originally on the door.
For the best effect,the distance between the door bottom and the ground should be 20cm-35cm (approx 8 inches-14 inches).


Custom-Made-Service Notice:
Need Extra Cost!
We are very flexible on the information that you want on the logo light,we can omit or add name,information ,photograph or anything else you'd like,
such as ,Company Name,Car Club Name,Favorite Film Pics or Figures and so on.Give us the picture you want to make,with format of psd,aicor-9,jpg,png,gif.
Pls contact us by eBay message.

 

 

Brand Vipshopping UPC Does not apply Manufacturer Part Number vip552_2016

2x LED Car Door Projector Ghost Shadow Laser Logo Light for Green Punisher Skull

Custom Service need Extra! If you need please contact us before bid.

 

This item included:
    2 x Led Car Door Logo Light
    2 x Logo Flim(pic same as eBay Show)
    1 x hole drill 23mm

 

Characteristic:
    Type: Door step light for Multi-logo car
    Light Color: as picture of the item
    Material: Aluminum alloy
    Lamp Type: LED
    Power output: 3W
    Power Supply: DC 12V+/-10%

 

Installation:
    Step one Removing the Door Panel
    * Make sure you are using adequete tools.
    * Snap off the panel located on the inside of the door.
    * Gently disconnect any wiring that may be attached.

 

    Step two: Using the hole Saw
    * Remove the hole saw tool from it's packaging
    * Drill out correct size hole from projector light
    * Ensure even contact between surface and drill

 

    Step three: Wiring to power
    * Connect the red and black wires to power and ground
    * Use proper safety when handling electricity
    * Snap the door panel back on and you're good to go

 

Buyer Notice:
Buyers should ensure this item fit for their vehicles before make an order,it's better that your car lights are originally on the door.
For the best effect,the distance between the door bottom and the ground should be 20cm-35cm (approx 8 inches-14 inches).


Custom-Made-Service Notice:
Need Extra Cost!
We are very flexible on the information that you want on the logo light,we can omit or add name,information ,photograph or anything else you'd like,
such as ,Company Name,Car Club Name,Favorite Film Pics or Figures and so on.Give us the picture you want to make,with format of psd,aicor-9,jpg,png,gif.
Pls contact us by eBay message.

 

 


Don’t want to wait Click to Buy Directly!
Direct-Buy
Place Bid
Buy Now
Add to cart
Payment

We accept Paypal payment only. Please make payment within 7 days after bidding ended. All non-pay bidders will result in a non-paymemt buyer alert from eBay and unpaid transcation would be closed. Please be a serious bidder.


When you are placing order, please make sure the following information is included:

Full Name

Correct Address

Post code

Phone number

Shipping

All items will be shipped to your eBay consignee address, please ensure the correct delivery address before your payment.

 

If you need us delivery the item to a new address, don't forget to give us a note in your order or give us a timely message within 24 hours after your payment, it's better not change address unless need it very much, we are not responsible for address change after the package sent out.

 

All items will be shipped out within 1-3 business days upon receipt of payment.

Usually the delivery to USA may takes approximately 7-15 business days, Other countries may be a bit longer.

 

We do not responsible for any custom duty or import tax.

Returns

We accept resend or refund the buyers if there is any quality problem on the item.

 

Buyers must contact us within 14 days after recieve the item. Buyers should read the item description carefully before place order.We are not responsible for some serious misunderstanding caused by buyers' carelessness.

Customer Services

We appreciate you leave us a ★★★★★ FULL FEEDBACK if you are satisfied with our items and service, this is what we are striving for. If you are not satisfied with your shopping experience, please contact us before you decide to leave a neutral or negative feedback, we will do our best to give you a satisfied issue solution.

Contact Us

Contact us by eBay messager at any time if any questions.

Nav_bar
Hot Item
2
2
2
2
2
New Arrival
New

New

New

New

New

New

New

New

New

New

New

New

New

New

New

New

New

New

New

New

New

New

New

New

On Sale












2x LED Car Door Projector Ghost Shadow Laser Logo Light for Green Punisher Skull

Custom Service need Extra! If you need please contact us before bid.

 

This item included:
    2 x Led Car Door Logo Light
    2 x Logo Flim(pic same as eBay Show)
    1 x hole drill 23mm

 

Characteristic:
    Type: Door step light for Multi-logo car
    Light Color: as picture of the item
    Material: Aluminum alloy
    Lamp Type: LED
    Power output: 3W
    Power Supply: DC 12V+/-10%

 

Installation:
    Step one Removing the Door Panel
    * Make sure you are using adequete tools.
    * Snap off the panel located on the inside of the door.
    * Gently disconnect any wiring that may be attached.

 

    Step two: Using the hole Saw
    * Remove the hole saw tool from it's packaging
    * Drill out correct size hole from projector light
    * Ensure even contact between surface and drill

 

    Step three: Wiring to power
    * Connect the red and black wires to power and ground
    * Use proper safety when handling electricity
    * Snap the door panel back on and you're good to go

 

Buyer Notice:
Buyers should ensure this item fit for their vehicles before make an order,it's better that your car lights are originally on the door.
For the best effect,the distance between the door bottom and the ground should be 20cm-35cm (approx 8 inches-14 inches).


Custom-Made-Service Notice:
Need Extra Cost!
We are very flexible on the information that you want on the logo light,we can omit or add name,information ,photograph or anything else you'd like,
such as ,Company Name,Car Club Name,Favorite Film Pics or Figures and so on.Give us the picture you want to make,with format of psd,aicor-9,jpg,png,gif.
Pls contact us by eBay message.

 

 

Don’t want to wait Click to Buy Directly!
Direct-Buy
Buy Now
Add to cart
Place Bid


  • Payment

  • Shipping

  • Returns

  • Customer Services

  • Contact Us

We accept Paypal payment only. Please make payment within 7 days after bidding ended. All non-pay bidders will result in a non-paymemt buyer alert from eBay and unpaid transcation would be closed. Please be a serious bidder.


When you are placing order, please make sure the following information is included:

Full Name

Correct Address

Post code

Phone number

All items will be shipped to your eBay consignee address, please ensure the correct delivery address before your payment.

 

If you need us delivery the item to a new address, don't forget to give us a note in your order or give us a timely message within 24 hours after your payment, it's better not change address unless need it very much, we are not responsible for address change after the package sent out.

 

All items will be shipped out within 1-3 business days upon receipt of payment.

Usually the delivery to USA may takes approximately 7-15 business days, Other countries may be a bit longer.

 

We do not responsible for any custom duty or import tax.

We accept resend or refund the buyers if there is any quality problem on the item.

 

Buyers must contact us within 14 days after recieve the item. Buyers should read the item description carefully before place order.We are not responsible for some serious misunderstanding caused by buyers' carelessness.

We appreciate you leave us a ★★★★★ FULL FEEDBACK if you are satisfied with our items and service, this is what we are striving for. If you are not satisfied with your shopping experience, please contact us before you decide to leave a neutral or negative feedback, we will do our best to give you a satisfied issue solution.

Contact us by eBay messager at any time if any questions.


Copyright of vipshopping All right reserved.