Package including:

1PCS T-1000Stand SD card led pixel controller,2012 new version;AC110V/220V input (manel will be sent to your email)

(please notify us 110V OR 220V you need when you purchase,thank you!)

You can download lededit software in this site:

http://dropcanvas.com/9dcgt

1.T-1000 standard edition System characteristics

1、32—256 Gray level，Support software Gamma correction。

2、Support the rules and special-shaped handle.

3、Single-port output，can support 2048 pixels。

4、Off-line(SD Card) control, play back content stored in the SD card.

5、The controller Can save up to 16 files ,copy the file into SD card in order.

6、The file in SD card must be named: 00_1.led, 01_1.led, 02_1.led…….

7、Compatible with single and dual ICs, if you control a single line IC LED lights, without being connected to the CLK line.

NOTE：1. When T-1000 controller control less than 512 lamps the frame rate can reach 30fps.

When T-1000 controls more than 512 lamps and less than 2048 lamps the frame rate will slow down automatically.

2. In the 2012 production version of the T-1000 to add a Chinese flag on the surface, you must use the new software

3. Use only in exchange 220v/50Hz or 110v/50HZ of voltage

Specifications:

Support chips:

Support IC type

Module in LedEdit software

Pixel numbers

remark

LPD6803,D705,1101,6909, 6912

T-1000-6803

2048 pixel

LPD8806,LPD8809

T-1000-8806

2048 pixel

TM1803,TM1804,TM1809,TM1812

T-1000-TM

2048 pixel

TM1804 and TM1809

low speed and high speed

TM1903TM1904TM1909TM1912

T-1000-TM19

2048 pixel

UCS6909UCS6912UCS7009UCS5903

T-1000-UCS-32

2048 pixel

UCS1903UCS1909UCS1912

T-1000-UCS-256

2048 pixel

low speed and high speed

UCS3903

T-1000-UCS-1024

2048 pixel

DMX512

T-1000-DMX

170/512 pixel

Compatible DMX512

WS2801,WS2803

T-1000-WS

2048 pixel

WS2811

T-1000-WS2811

2048 pixel

low speed and high speed

DS189

T-1000-DS189

2048 pixel

TLS3001,TLS3002TLS3008

T-1000-TLS

* pixel

P9813

T-1000-P9813

2048 pixel

SM16715

T-1000-SM16715

2048 pixel

low speed and high speed

SM16716

T-1000-SM16716

2048 pixel

BS0901,BS0902

T-1000-0901

2048 pixel

BS0815

T-1000-0815

2048 pixel

NOTE：For the TTL(SPI) signal, the controller signal ground must connect to the LED ground directly.

Use of differential signaling the lamps must be connected to a differential receiver.

4.Definition of display
NOTE：MODE screen display a number that the file‘s serial number.

SPEED screen display a number that the play speed，divided into 1-16 grade，16 grade is the fastest.

7.Specific parameters:

   Memory card：

          type：SD card（suggest using high-speed SD card）

          Capacity：128MB—2GB

          Format：FAT

          Store file：*.led

Physical parameters：

Working temperature ：-30℃—85℃

Working voltage：AC220V

Working power：3W

Size：217(L)mm * 134(W) mm * 60mm(H)

Weight：1KG

Signal port：3pin connect port

NOTE：

Before copy files to SD card ，The SD card must be formatted as FAT format.
8.Trouble shooting：

Question 1：After power, the T-1000 standard version ERROR indicator has been flashing without display output

answer：The ERROR indicator has been flashing means the controller did not read the card correctly, possible problems:

    ①SD card is empty, with no effect file.

    ②The effect file in the SD card and the controller model are not match, please choose correct controller model in LedEdit and then re-create the effect file *led.

    ③SD card did not format to FAT before copy effect files.

    ④Please check the supply power voltage, the controller can be individually powered to exclude power reasons

⑤Changing the SD card and then test to exclude the possibility of a bad SD card

Question 2: The controller is powered on, the indicator is normal, but the lamps have no effect change

Answer: The reasons for this are as follows:

① Check if the lamp′s signal line and the controller connected correctly

②     If the TTL signal is received, the lamp and the controller must be common ground, that means connect the lamp′s and the controller′s ground together

③     Check if the model chose during making display files on the SD card match the chips used in the lighting

Question 3：Controller and light connected, after. Lamps flicker. Controller indicator to normal.

Answer：①The ground wire is not connected between the controller and lighting.

         ②The file in SD card is bad, Chip model does not match with the actual.

③Insufficient power supply.

Question 4：The SD card can not be formatted.

Answer：①First make sure the SD card on the side of the protection switch is already open.

②SD card reader is broken

③ Do all of this can’t deal with the question. Change the SD card tests again.

We ship to the worldwide.
Please confirm your Ali address matches the address you live in now.
We usually provide 3 shipping methods for you.

Please don't worry. We ship to Italy and Russian Federation,but it maybe takes more time than other countries.So Please be patient to wait!

Support IC type	Module in LedEdit software	Pixel numbers	remark
LPD6803,D705,1101,6909, 6912	T-1000-6803	2048 pixel
LPD8806,LPD8809	T-1000-8806	2048 pixel
TM1803,TM1804,TM1809,TM1812	T-1000-TM	2048 pixel	TM1804 and TM1809 low speed and high speed
TM1903TM1904TM1909TM1912	T-1000-TM19	2048 pixel
UCS6909UCS6912UCS7009UCS5903	T-1000-UCS-32	2048 pixel
UCS1903UCS1909UCS1912	T-1000-UCS-256	2048 pixel	low speed and high speed
UCS3903	T-1000-UCS-1024	2048 pixel
DMX512	T-1000-DMX	170/512 pixel	Compatible DMX512
WS2801,WS2803	T-1000-WS	2048 pixel
WS2811	T-1000-WS2811	2048 pixel	low speed and high speed
DS189	T-1000-DS189	2048 pixel
TLS3001,TLS3002TLS3008	T-1000-TLS	* pixel
P9813	T-1000-P9813	2048 pixel
SM16715	T-1000-SM16715	2048 pixel	low speed and high speed
SM16716	T-1000-SM16716	2048 pixel
BS0901,BS0902	T-1000-0901	2048 pixel
BS0815	T-1000-0815	2048 pixel