MG Sensor: 1/4" CCD
Lens Angle: 170°
Image Resolution: 656(H) * 492(V)
Horizontal Resolution: 420TV Line
Output Standard: NTSC/PAL
S/N Ratio ≧48dB
Electronic Shutter: 1/60 to 1/100,000 seconds
Frame Rate: 60fps(@27MHzin NTSC) 50fps(@27MHzin PAL)
Power Supply: DC12V±10%
IP Rating: IP66
Exterior materials: ABS
Sync. System: internal
Video Output: 1.0Vpp, 75Ohm
White Balance: Auto
Operating Temperature: -40 to + 80°C, 95% RH maximum
Storage Temperature: -40 to + 105°C, 95% RH maximum
How to install
1. Take out your stock license plate light at the back of your car.
2. Fix the camera to where the stock license plate light was.
3. Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power
4. Connect the power of the camera to your car reverse lights - red wire to positive and black wire to negative.
5. Connect the video cable of the camera to the extension cord.
6. Connect the extension cord to your car monitor.
7. You will see the images when your car is in reverse shift.