AEM Digital Wideband O2 Uego Air Fuel Ratio AFR Guage Kit No Sensor 30-4110NS
AEM's part number 30-4110NS Wideband UEGO air/fuel ratio Controller Gauge is sold without a wideband sensor. This allows users to source a Bosch 4.9LSU sensor separately to potentially save money.
AEM’s legendary Digital Wideband O2 AFR UEGO Gauge is a wideband UEGO air/fuel ratio controller (AFR) and gauge in one. It unites accuracy, speed and control with an easy to read, digital LED display and sweeping LED “needle” that changes colors as AFR changes from rich to lean.
APPROVED SENSORS FOR USE WITH 30-4110NS
| Manufacturer | Part Number | Description |
|---|
|
AEM
|
30-2004
|
Bosch LSU4.9 (950mm)
|
|
Bosch
|
17025
|
Bosch LSU4.9 (950mm)
|
|
Walker
|
250-25036
|
Bosch LSU4.9 (950mm)
|
|
Walker
|
250-25075
|
Bosch LSU4.9 (325mm)
|
AEM tested many sensors with the 30-4110NS, including popular inexpensive knockoff sensors, and determined that only the following sensors will deliver reliable performance:
Using the above sensors ensures that the factory sensor calibration is accurate and that the controller performs optimally. The use of any non-approved sensor may affect the controller’s operation, and will void the warranty of the 30-4110NS.
WHAT IS A WIDEBAND UEGO AIR/FUEL CONTROLLER? AEM's Wideband UEGO (Universal Exhaust Gas Oxygen, pronounced “You-Way-Go”) Controllers are powerful, cost effective tuning tools that allow users to accurately monitor the Air/Fuel Ratio (AFR) of their engine.
WHY USE A WIDEBAND AIR/FUEL CONTROLLER? Accurate AFR data is critical when tuning an engine. Running rich (very low air/fuel ratio, excessive fuel) can cause a loss in power, while running too lean (very high air/fuel ratio, not enough fuel) may result in serious engine damage. Using a wideband air/fuel controller during the tuning process allows you to monitor AFR and adjust tuning parameters to optimize them for maximum power and efficiency. AEM has a comprehensive line of highly accurate, reliable wideband air/fuel controllers that can help ensure your vehicle is optimally tuned.
WHAT IS FREE-AIR CALIBRATION? Some of our competitors require that you frequently perform a free-air calibration procedure to calibrate their O2 sensors. This process involves removing the sensor from the bung while still connected to the controller device, then waving the sensor in the air so it can read atmospheric O2 levels. We use Bosch 4.9 LSU sensors in our wideband controllers. Our sensors are individually laboratory-calibrated by Bosch and never require free air calibration!
CAN I CHANGE THE AEM UEGO SENSOR’S CONNECTOR? No. There is a laser-etched, calibrated resistor in the sensor’s connector body. This resistor is specifically created for the exact sensor that it is attached to. Modifying this will invalidate the sensor’s output.
Our World-famous Wideband O2 air/fuel ratio UEGO gauge features a digital LED display and sweeping LED 'needle' that changes colors as AFR changes from rich to lean. A 52mm (2-1/16") gauge housing ensures that it will fit in most gauge pods and can be remotely mounted virtually anywhere. All AEM digital gauges feature a 0-5v analog output for use with data loggers and almost any engine management system. Each gauge comes with black and silver bezels and black and white faceplates for multiple color combinations and a custom look (a black Lambda faceplate and black and white Air/Fuel Ratio faceplates).
The Bosch UEGO sensor gives the controller its speed and accuracy. The Bosch 4.9 LSU sensor used in the 30-4110 AEM Wideband UEGO AFR Controller Gauge has a faster light off time and draws less current than the 4.2 LSU sensor used with AEM’s discontinued 30-4100 Wideband UEGO Controller Gauge. The 4.9 LSU sensor features the same fuel compatibility as the 4.2 LSU and NEVER requires free-air calibration when used with AEM’s 30-4110 Wideband UEGO AFR Gauge. The 30-4110’s 4.9 LSU sensor uses a different connector than the connector used with the 4.2 LSU sensors included with the original, discontinued 30-4100 gauge controller. The sensors are not interchangeable between the two gauge controllers in any way, including changing connectors on the gauges.
The Wideband O2 air/fuel ratio UEGO gauge is a must if you want to maximize your engine's power and safety. When tuning an engine, accurate air/fuel ratio data is critical because running with too rich of an AFR can cause a loss of power, and running a lean AFR can result in serious engine damage. AEM's digital Wideband AFR UEGO gauge can quickly alert you to even a .1 change in air/fuel ratio and provide enough time to shut down an engine before damage occurs.
- Controller gauge and hardware sold without wideband sensor
- Weld-in bung included
- No free air sensor calibration required with approved sensors
- 52mm (2-1/16”) gauge housing
- 0-5v analog output (10-20 AFR range only)
- RS232 Serial Output
- Interchangeable black/white faceplates and black/silver bezels included
- Center LED Readout Displays Gasoline Values from 10 to 18 :1 AFR
- Outer LED Ring Displays Gasoline values from 11 to 16.75 :1 AFR
- 0-5V Output Gasoline values from 10 to 20 :1 AFR
- 0-5V Output E85 values from 6.6 to 13.2 :1 AFR
- 0-5V Output Ethanol values from 6.14 to 12.3 :1 AFR
- 0-5V Output Methanol values from 4.4 to 8.8 :1 AFR
- 0-5V Output Lambda values from .68 to 1.36
- Center LED Readout Displays Lambda values from .68 to 1.23
- Outer LED Ring Displays Lambda values from .75 to 1.14
- About Us
- Shipping
- Returns
- Postage
- Returns
- Agreement
Injected Performance
Welcome to the fresh and all-new homepage of Injected Performance! We've created a layout that is both stylish and functional, just how we like our cars. You'll find a huge assortment of aftermarket performance parts listed, growing every week, along with our integrated blog, some tech resources, and helpful information along the way.
Begin by selecting a vehicle, like the Nissan 350Z, or by browsing a category, like Wheels. At any point, you can always filter your current results by selecting a particular brand or vehicle. To continue browsing all products, simply select "All Cars" or "All Brands" again. Featured items will always be listed on the home page, which will stay fresh with new deals and content.
From AEM intakes to Volk wheels, we strive to be your all-in-one parts source for many popular vehicles. We are constantly adding new brands and products to our website, but please, contact us if you are searching for some specific or otherwise not listed on our site; we can likely find it for you at a competitive price.
We've also added many technical articles, such as on each category page, that may help your buying decision when it comes to which brake pads to buy, or whether lowering springs or coilovers are the better choice for you. In addition, our new Resources page at the top will have some additional articles, including our Haltech support page and some helpful hints for getting started in motorsports.
Shipping
When placing your order please indicate how you would like your part shipped. We are more than happy to accommodate any type of shipping method be it fast or slow. If you have any issues please feel free to give us a call.
Returns
Returning a part is very simple. All you need to do is fill our the return form including your contact information, the part number, and the original invoice number and we will contact you with a RGA (Return Goods Authorization) number and you are set. If you have any questions please feel free to contact us. With our relationship with these manufacturers we make the warranty process easy. Please contact us if you have any questions.
Payment Options
We accept PayPal Payments
Injected Performance
10800 Roark Rd.
Houston TX 77099
877-643-5532
injectedperformance.com
