MoTeC C1812 COLOR DISPLAY LOGGER
|
The C1812 comes standard as a combined 12” full colour display, powerful control device and fully programmable data logger with 250 MB internal memory. Optional USB Logging provides additional data capacity and flexibility, and also upgrades the internal memory to 500 MB. The anti-reflective, high contrast display is clear and vibrant in direct sunlight. Numerous supplied display layouts offer fixed graphics with a live video window streaming from any one of three cameras at a time, plus configurable channels and labels. The optional Display Creator software provides the tools for full screen customisation. The C1812 acquires data from other devices, such as an ECU, displaying data channels, warning alarms, lap times, fuel calculations, maths functions and more.
|
• High resolution 310 mm (12'' approx) colour LCD display • High brightness for sunlight readability • Optional USB logging (includes 500 MB internal logging) • Suited to larger vehicles, marine and industrial applications • Can replace the display clusters in modern vehicles • Supports Wideband Lambda from MoTeC PLMs or LTCs • GPS Lap Timing • Tell Tales and Diagnostic Logging • Preserved Channels • Running Min/Max, Timers, PID Control, Engine Log • Supports T2 Telemetry (optional) • Easily integrates with MoTeC CAN based devices such as ECUs and expanders. Full I/O expansion with E888, E816, VIM and SVIM expanders. • Composite video inputs (3) allow live on-screen footage, one for example from a rear view camera.
|
Display • Type: Colour TFT LCD, anti-reflective • Resolution: 800 x 480, anti-aliased graphics • Selectable fixed layouts include a dedicated live video window on the right side of the screen. Note: Video window is blank if no cameras are connected; this area cannot currently be used for other channels in a fixed layout. • Create custom layouts via optional Display Creator software • 48 user-defined, scrollable message lines with programmable overrides • 3 programmable modes with customisable labels
Logging • 250 MB internal logging memory • Optional USB logging to a removable storage device - Includes upgrade to 500 MB internal memory • Logging rates up to 1000 samples per second • i2 Standard data analysis software included (Pro Analysis upgrade available)
Removable USB Storage Device Options • 61280: MoTeC 32 GB USB3 Data Plug – mechanically latched, waterproof with anodised housing, ideal for exposure to the elements and vibration. • 61292: 32 GB USB3 Flash Drive – fast, low weight and low cost, not mechanically latched or waterproof.
Inputs (* denotes number available with I/O upgrade) • 10 (20*) analogue voltage inputs: - 4 (8*) x 0 to 5.46 V, 1.33 mV resolution - 6 (12*) x 0 to 15.0 V, 3.66 mV resolution • 4 (8 with I/O upgrade) analogue temperature inputs - 0 to 15 V, 3.66 mV resolution • 4 x Digital inputs • 2 x Switch inputs • 4 x Speed inputs • 3 x Composite video inputs
Outputs • 6 x low side outputs PWM or switched operation • 1.0 Amp max, current limited, thermal overload protected
Expanders Fully compatible with E816, E888, VIM and SVIM Expanders.
Internal Sensors • 3-axis accelerometer, detection range: +/- 5G • Dash temperature sensor • Sensor supply voltage • Battery voltage
Communications • 4 x configurable CAN buses, with individually programmable CAN bus speeds. One can be used as RS232 Receive. Two CAN buses support VIM/SVIM Expanders. • 2 x Dedicated RS232 ports
Power Supply • Operating voltage: 6 to 32 V DC • Operating current: 0.5 A typical at 14 V (excluding sensor and USB currents) • Reverse battery protection • Battery transient protection
Sensor Supply Currents • 5 V sensor supply: 0.25 A maximum • 8 V sensor supply: 0.25 A maximum
Operating Temperature • Internal: - 20°C to 70°C (above 60°C maximum backlight brightness progressively reduced) • Typical ambient temperature range (free air): - 20°C to 55°C
Ingress Protection (IP) Rating • IP68 dust tight, protected against water immersion (continuous submersion to depth of at least 1 m) (IP rating is dependent upon the user ensuring that the connector entries are waterproof, which, as a minimum, requires all unused wire cavitites on the connector to be plugged.)
Physical • Size: 340.8 x 144.1 x 34 mm excluding connectors • Weight 1712 g • 1 x 79 pin Autosport connector • 1 x mini USB port (located on the back of the device)
|
Software Windows-based Dash Manager for setup and management of the display and data logging system, that provides: • Configuration of the inputs, outputs, LEDs, display, data logging and calculations • Offline generation of a configuration file that can then be sent to the device. • Channel monitoring • Firmware updating and extensive help screens Optional Display Creator software allows for full customisation of the screen layout, including live video and i2 Data Analysis software (Standard or optional Pro) provides the tools for comprehensive data analysis.
Compatibility • MoTeC ECUs: All (some earlier models may require an additional adaptor in conjunction with the RS232 adaptor) • MoTeC Displays/Loggers: All • MoTeC Accessories: VIM, SVIM, E816, E888, SLM, PLM, LTC, BR2, PDM, GPS, VCS etc. • Many non-MoTeC devices
|
Accessories • 62206: C1812 LOOM • 61279: CABLE - USB A PANEL TO MINI B (This cable is required for USB Logging) • 61280: MOTEC 32 GB DATA PLUG • 61292: 32 GB USB3 FLASH DRIVE
Optional Upgrades • 29940: C1812 44 I/O (see Specifications and Pinout) - 10 extra analogue voltage inputs (AV11 to AV20) - 4 extra analogue temperature inputs (AT5 to AT8) • 29958: C1812 USB LOGGING + 500 MB INTERNAL LOGGING • 29956: C1812 DISPLAY CREATOR • 29960: C1812 PRO ANALYSIS • 29963: C1812 T2 TELEMETRY • 29945: C1812 ADVANCED FUNCTIONS - Advanced Maths - Channel Maths - 16 x 2D Tables (instead of 4) - 16 x 3D Tables (instead of 4) - 50 User conditions (instead of 20)
|
MoTeC’s professional, race-grade electronics are sophisticated and therefore it is highly recommended that installation is performed by a professional installer. It is NOT advised for the average installer. An advanced understanding of electrical systems is necessary. Fischer Motorsports will support all sales and also offers professional grade wiring harnesses and installation services for all applications. We have 10+ years of professional race experience based upon MoTeC control and specialize in Power train, Chassis, Drivetrain, and Data programming both at our facilities, onsite customer dyno/track support, or even remote support. Please remember that if you cannot find the time or finances to do the job right the first time, you will ultimately end up looking for time or funds to do it over again. Select us or find a qualified installer, it will ultimately increase your results and minimize future expenses or downtime related to improper setup or installation.
|
PAYMENT - SHIPPING - RETURNS
|
We Accept The Following Forms of Payment
For fast shipments, please pay for the item after purchase. For Buyer/Seller protection, we will only ship to CONFIRMED addresses. Please, SERIOUS buyers only!
Shipping Most of our items ship same day. If we expect an item to take longer than three business days to ship we will let you know. International shipments may take up to five business days to ship.
Please see the eBay shipping calculator for an exact shipping quote to your location.
We use UPS Ground for quick domestic delivery with tracking numbers. PLEASE CONTACT US BEFORE BUYING FOR INTERNATIONAL SHIPPING APPROVAL. We will gladly combine shipping for multiple items!
Returns All sales are final. None of our items are returnable or refundable unless approved by Fischer Motorsports. A Return Authorization may be issued in certain cases where Fischer Motorsports authorizes a return, refund or exchange. All returns and cancellations will be charged a 20% re-stocking fee. You must contact us via email and request for your case to be reviewed. RA numbers expire 15 days after they are issued. Items returned without an RA number or using an expired RA number will be refused.
|
Please Visit Our eBay Store Or Contact Us For All Your MoTeC Needs
|
|
|
|