| x |
Black Hat
Auction"trusted
eBay seller since 1998"
|
| x |
Set of 6 Kent-Moore
Fuel Injector Tester
Test Adapters & Cables
J-34730-380
U, W, L, N To avoid the removal of the intake plenum to test the
injectors, this test light connects at the main injector connector and
allows technicians to visually check that the proper signal is being
sent from the ECM to the injectors. This box is connected at the
injector harness under the hood and features eight LED's which will
blink if the proper signal is received from the ECM.
J-34730-200
J-34730-225
4.3L, S/T. Used with J-39021. Fuel injector tester to facilitate a
fuel pressure drop test using J-34730-250 gauge, J-34730-230 poppet
valve tester.
J-34730-390
W The 3.4L DOHC fuel injectors are installed under the intake plenum.
This harness allows previously essential J 34730-380 Injector Load
Tester to be used without having to disassemble the intake manifold.
This adapter connects between the vehicle fuel injector harness' 6-pin
and 10-pin connectors and previously essential J 34730-380 Load Tester.
When the engine is cranked, the lights on the Load Tester illuminate if
the output signal is supplied by the PCM.
J-34730-385
U, W, L, N, This harness adapts previously essential J 34730-380
Injector Load Tester for use on the 3400, 3100, and 3.4L DOHC Engines.
In the event of a misfire, the load tester is used to diagnose the
control module's output signal to each injector. This adapter
interfaces J 34730-380 Load Tester to the engine wiring harness. With
the load tester connected, LED's on the tester will flash during engine
cranking when the PCM is producing an output signal.
J-34730-410
UNIVERSAL J 34730-410 is a fuel injector test harness. This tool is
used in conjunction with J 34730-E to diagnose injector problems on
today's engines.
|
|
We do our best to accurately describe our products, thats what our
100,000+ FEEDBACK reflects!
Condition:
Tools are in good condition.
SKU: PR-182-A-AP-30456
| |
<>