Condition: BRAND NEW IN ORIGINAL PACKAGING

Warranty: 2 YEAR AUDIOSAVINGS

• (1) Rockford Fosgate Punch PM600X4 600 Watt Marine Boat 4-Channel Amplifier
• (1) Pair of Kicker 41KM604W 6-1/2" 6.5" KM-Series Speakers Totaling 150W Peak/50W RMS
• (1) Rockville RMWK8 8 AWG Waterproof Marine/Boat Amplifier Wire Kit
• (1) Rockville MRCA20 20 Foot Twisted Pair Marine RCA Cable

Authorized Rockford Fosgate Dealer!

Description of PM600X4:

The PM600X4 is a 600 Watt 4-channel amplifier with high dynamic power using Class-a/b technology and a conformal coated pc board designed for motorsport and marine applications.

The Punch PM600X4 multi-channel amplifier is versatile to power any audio system configuration. In addition to 4-channel stereo mode, you can bridge both channels to create a high power 2-channel amp, or run stereo speakers on the front with subwoofers on the rear in 3-channel mode. The variable HP/LP crossover and built-in Punch EQ allows for precise tuning of Bass frequencies and the Pass-Thru RCA jacks provide flexibility as your system grows and keeping Y-adapters to a minimum.

Features :

• Rockford Fosgate Punch PM600X4 600 Watt Marine Boat 4-Channel Amplifier
• High level input capable with Auto Turn-On circuit
• RCA pass-thru outputs
• Features C.L.E.A.N. Set-up
• Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
• 12dB/octave Butterworth crossover
• On-board Punch EQ with +18dB boost @ 45Hz.
• Muted turn on
• Stealth top mounted control panel
• Cast aluminum heatsink
• Short circuit protection
• Over current protection
• Marine grade two part epoxy coating on circuit boards
• Marine grade stainless steel hardware
• CEA-2006 Compliant
• Number of Channels : 4
• Power Handling :
• RMS Power Handling : 75 Watts x 4 @ 4-Ohm 
•                                      : 150 Watts x 4 @ 2-Ohm 
•                                      : 300 Watts x 2 @ 4-Ohm Bridged
• Total Rated Power : 600 Watts
• Dynamic Power (PVC/PowerCube®) : 129 Watts x 4 @ 4-Ohms 0° Res 
•                                                               : 211 Watts x 4 @ 2-Ohms 0° Res
• Bridgeable : Yes
• Frequency Response : 20Hz to 20kHz +/- 1.0dB
• Efficiency (average) : 68% @ 4-Ohm
• Total Harmonic Distortion (THD+Noise) : 4-Ohm : <1.0% 
•                                                                     : 2-Ohm : <1.0%
• Crossover Controls : Front/Rear High-Pass (HP) : 50Hz-250Hz @ 12dB/octave Butterworth 
• Front/Rear Low-Pass (HP) : 50Hz-250Hz 12dB/octave Butterworth 
• All-Pass : Yes
• Tone Controls : Front Punch EQ2 Bass : 0dB to +18dB @ 45Hz and/or 
• Front Punch EQ2 Treble : 0dB to +12.5dB @ 12kHz 
• Rear Punch EQ2 Bass : 0dB to +18dB @ 45Hz and/or 
• Rear Punch EQ2 Treble : 0dB to +12.5dB @ 12kHz 
• Function depends upon LP/AP/HP switch position
• Input Sensitivity : 150 mV - 12 V
• Signal Input : Hi/Low level : 2 RCA pair
• Signal Output : Low level : 1 RCA pair
• Power Input Connector : Captive C-Clamp

Audiosavings can only ship Kicker products to the United States.  Sorry, but we cannot ship Kicker to Canada or United Kingdom.

Description of 41KM604W: 

Here at AudioSavings we strongly believe that Kicker is the BEST brand in the Car Audio Industry. We are so confident that you will be happy with your Kicker purchase from us that we will offer you the following guarantee. We GUARANTEE you will be more than satisfied with the sound and value of any Kicker products purchased from us. We urge you to buy this product; test it; and if it doesn't meet your standards; send it back to us within 90 Days and we ll give you a 100% FULL REFUND (or store credit). We ll even give you a return shipping label to ship it back to us!!!

There are no restrictions to this guarantee, other than you must send back the same item we sent you along with the any included accessories.

Kicker 41KM604W designed for the simplest of speaker installations, it is a breeze to get live-quality, full-range audio designed specifically for a marine environment.

KICKER Marine Coaxials meet or exceed industry standards for environmental humidity and corrosion* and for material degradation due to UV exposure. ** UV treatments on the coaxials  injection-molded cones, Santoprene® surrounds, baskets and grilles help all models to maintain in marine environments, These speakers can endure most any weather conditions with splash- and spray-resisting sealed motors, cones and locking terminal covers. Speaker hardware is forged from rustproof, 316L stainless-steel. The coaxials come packaged with ample wiring for running the length of a large vessel to the power amplifier.

The KM604 is the only speaker pair that is completely white, available in 4-Ohm and with ½-inch tweeters.

Features:

• Pair of Kicker 41KM604W 6.5" 4-Ohm 2-Way Coaxial Marine Speakers
• Power Handling Per Speaker: 150 Watts Peak/50 Watts RMS
• Power Handling Per Pair: 300 Watts Peak/100 Watts RMS
  
• 2-Way Design
• Santoprene® surrounds
• Woofer Size: 6.5"
• Woofer Composition Polypropylene
• Tweeter Size: 1/2"
• Tweeter Dome Material: PEI (Polyetherimide)
• Impedance: 4-Ohms
• Sensitivity: 90dB
• Frequency Response: 35-21,000 Hz
• Cutout Dimensions: 5.18"
• Top-Mount Depth: 2.5"
• Grilles: White Only

Description of RMWK8: 

Rockville's RMWK8 exclusive Professional Marine Installation Kit features top of the line accessories which have been specifically engineered to withstand the toughest of marine environments. You will hear the difference and we guarantee you will not be disappointed!

Rockville Marine Audio Interconnect cables are specifically engineered to withstand the challenges of both salt water and fresh water marine installations. The utilization of tinned Oxygen Free 100% copper conductors with polyethylene dielectrics in a twisted-pair arrangement optimizes noise rejection. The small-diameter white PVC jacket is ultra-flexible enabling our cables to be easily routed around bends and through tight spaces. Our exclusive molded connector features a water proof inner cap that is heat shrunk in place over all solder connections thus guaranteeing a completely water proof and corrosion resistant connection. The locking plug design with split pin technology further insures tight connections that will not vibrate free even during the most extreme boating maneuvers.

Our Marine Grade Speaker Cables are engineered for maximum signal transfer with minimum impedance loss. The cable strands are all individually tinned, fine-strand, oxygen-free copper with aluminum composite construction and provide a high-fidelity speaker connection that is especially engineered for the marine environment. Woven down to a flat shape, the cables can be easily routed throughout the bulkhead with ease.

Features:

• Rockville RMWK8 8AWG Guage Waterproof Marine/Boat Amplifier Wire Installation Kit
• 25’ Translucent, Twisted Pair, High Quality, Tinned-CCA Flexible PVC RCA Cable
• 20’ 8 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3’ Black Poly Woven Mesh to better resist chemicals in the battery compartment
• 4’ 8 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
• 25’ 16 Gauge 100% Tinned-OFC, White, Non-Transparent Resin PVC, Flat Speaker Cable
• 20’ Blue Remote Wire
• 1PC Silver Mini-ANL Fuse Holder – Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
• 1PC 50A Mini-ANL Fuse
• 2PCS Ring Terminals
• 2PCS Spade Terminals
• 5PCS Speaker Cable Terminals
• 1PC Washer
• 10PCS White Cable Ties

Description of MRCA20: 

Rockville marine audio interconnect cables are specifically engineered to withstand the challenges of both salt water and fresh water marine installations. The utilization of tinned OFC copper conductors with polyethylene dielectrics in a twisted-pair arrangement optimizes noise rejection. The small-diameter white PVC jacket is ultra-flexible enabling our cables to be easily routed around bends and through tight spaces. Our exclusive molded connector features a water proof inner cap that is heat shrunk in place over all solder connections thus guaranteeing a completely water proof and corrosion resistant connection. Our locking plug design with split pin technology further insures tight connections that will not vibrate free even during the most extreme boating maneuvers.

Features:

• Rockville MRCA20 RCA Interconnect Cable
• 20’ Ultra-Flexible PVC Shield
• Twisted Pair
• Premium Audiophile Marine RCA Interconnect Cable
• High Performance Water Proof RCA Plugs
• Tinned Copper Strands for Sonic Purity
• Outstanding Noise Rejection, Accuracy, and Frequency Response

AudioSavings Return Policy:
At Audiosavings, we strongly believe in customer satisfaction and therefore offer a friendly return policy.

Prior to returning merchandise, contact us and we will give you a return authorization #.

You may return this item for a refund within 30 DAYS of purchase.

Warranty Repair/Exchange Period: 2 YEAR

Defective items:
If your item is defective within the first 30 days of when it was delivered to you; you have the following options:

• We will send you a pre-paid shipping label to replace the item for a brand new one.
• We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
• We will refund you 100% of your money back. For refunds it is the customer's responsibility to ship the item back to us.

Non-defective items:
If you want to return your item within the first 30 days of when it was delivered to you; you have the following options:

• You may exchange the item for another item of your choice. If the item you choose is more or less money we will work out the price difference with you. The customer is responsible to ship the item back to us. Please note if the item you return is used there will be a 10% restocking fee deducted from your credit.
• You may receive a refund for the item less a 10% restocking fee. Customer is responsible to ship the item back to us.

Replacement/Processing Time:
Your replacement or refund will process within 3-5 business days of when we receive the item.

Please note items with physical damage un-related to shipping are not covered under warranty. This includes blown speakers with burned voice coils. Registered software cannot be returned.

You MUST notify us within 48 hours if you receive an item that was damaged during shipping.

Process for returning items
Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.