T04E T3/T4 20PC TURBO KIT W/INTERCOOLER+TOP MOUNT MANIFOLD B16/B18 CIVIC INTEGRA
|
High Compression/ Boosting T04E Turbocharger |
FEATURES
----------------------------------------------------------------------------------------------------------------------- |
|
Capable of Boosting Horse Power up to 300+ BHP |
High Quality Material, Cast Housing with Durable Steel |
|
| Exhaust (Turbo Manifold) Flange: |
Standard T3/ T4 4-Bolt |
| Exhaust (Downpipe) Flange: |
Standard T3 5-Bolt |
| Intake Inlet/ Outlet: |
3.00"/ 2.00" |
Compressor:
| Trim: |
55 |
| A/R: |
.50 |
| Inducer: |
50.50 |
| Exducer: |
76 |
Turbine:
| Trim: |
73 |
| A/R: |
.63 |
| Inducer: |
65.50 |
| Exducer: |
55.90 |
|
|
High Performance Long Tube Tubular Exhaust Turbo Manifold |
FEATURES
----------------------------------------------------------------------------------------------------------------------- |
High Performance Turbo Racing Design
Computerized Mandrel-Bended to Maximize Air Flow Smoothness
Tubular Top-Mount Design to Ensure Equivalent Exhaust Flow Rate from each Cylinder
Standard T3/ T4 Configuration Outlet |
Made of High Quality T-304 Polished Stainless Steel Alloy Material for Strength and Durability
TIG Welded CNC Machined Flange for Resistance against Cracking and Wearing
Increase Engine Exhaust Output and Efficiency
360mm/ 62mm External V-Band Wastegate Port and Flange Welded
(Might Require Welding) |
Lightweight Aluminum Bolt-On Front-Mount Intercooler |
FEATURES
----------------------------------------------------------------------------------------------------------------------- |
High Performance Bar and Plate Turbo Racing Design
Intercooler Overall Size: 27.00” (L) X 6.25" (H) X 3.50" (W)
Core Size: 17.50" (L) X 6.25" (H) X 3.50" (W)
EInlet/ Outlet: 2.25"/ 2.25" |
Made of High Quality T-6061 Aluminum Durable Material
Allow More Horsepower at the Same Boost Level and Even More Power at the Higher Boost Level
Helps Reducing Engine Inlet Temperature
Mounting Hardware Included
|
|
Universal Aluminum Intercooler Piping |
FEATURES
----------------------------------------------------------------------------------------------------------------------- |
Made of High quality T-6061 Lightweight Aluminum Piping
Polished Surface Finish |
Increase 65% Air Flow comparing with other Standard Piping
2.50" Piping Diameter |
Lightweight Stainless Steel Down Pipe |
FEATURES
----------------------------------------------------------------------------------------------------------------------- |
Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends
Inlet/ Outlet Sizes: 2.50”/ 2.375”
Piping Diameter: 2.50" |
i.e. Maximizing Smoothest Exhaust Airflow; Instantly Gains 10-15 HPs
Direct Bolt-On Installation, O2 Sensor Bung Insertion; Requires NO Modification |
|
60mm Wastegate with Spring |
FEATURES
----------------------------------------------------------------------------------------------------------------------- |
|
Comes with 16 PSI spring installed |
High strength cast steel body with steel head |
|
Turbo Blow-Off-Valve |
FEATURES
----------------------------------------------------------------------------------------------------------------------- |
Billet Aluminum Body
8 Discharge Ports That Draw In Surrounding Air and Release a Unique Discharge Sound
Dual Spring System Promoted Response and Allows for High Boost Pressures |
2-bolt mounting design
40mm, Hard-Anodized Valve for Increased Airflow
Holds Up to 30 PSI Boost Pressure
Aggressive JDM discharge sound |
|
Aluminum 2.5” Flange Pipe |
FEATURES
----------------------------------------------------------------------------------------------------------------------- |
Fits TYPE-S or TYPE-RS Dump Pipe Flange
2.5" Pipe Size |
Construction Prevents Warping due To High Heat
Made of High Quality T-6061 Aluminum, Lightweight Design |
|
10AN Oil Feed Line |
FEATURES
----------------------------------------------------------------------------------------------------------------------- |
Stainless Steel Hose, Braided for Heat and Pressure Resistance, Strength and Durability
Length: 36.00" /Inner Diameter: 0.25" |
1/8 NPT Fittings Natural Polish Finish
CNC Machined Turbo Adapter Plate |
|
30PSI Turbo Boost Controller |
FEATURES
----------------------------------------------------------------------------------------------------------------------- |
CNC Machined Aluminum Body
Worm Gear C-Clamp Included |
1-30 PSI Adjustable
Hardware and Fittings Included |
|
15m Heat Wrap |
FEATURES
----------------------------------------------------------------------------------------------------------------------- |
Made of High Quality Pulverized Lava Rock Converted Silicate Fiber Material for Maximum Heat and Wearing Resistance
Withstands 2500 °F (Fahrenheit) Radiator Heat and 1800 °F (Fahrenheit) Direct Heat
Tested to Tolerate Chemical, such as Radiator Fluid, and Oil Corrosion |
Serves as Heat and Air Shield for Enhancing Energy Transfer and Air Flow Performance
Dimensions: 2.00" (Width) X 1/16" (Thick) X 600"/ 50' (Length) |
|
Turbo Timer |
FEATURES
----------------------------------------------------------------------------------------------------------------------- |
Allows the vehicle to idle the engine, for the timed period, with the ignition key removed
Universal for all manual & automatic transmission vehicles both turbo-charged or non turbo-charged. |
Auto Mode - Precise calculation of cool down period to ensure proper cool down of turbo-charged engine.
Digital display - Allowing you to see during day & night time |
|
Fuel Pressure Regulator |
FEATURES
----------------------------------------------------------------------------------------------------------------------- |
Fuel pressure regulator can deliver vehicles’ highest performance, with long life and high reliable operation
Adjustable fuel pressure regulator with 1:1 ratio
CNC machined light weight |
Adjustable from (1-15) psi to (140) maximum fuel pump capacity
Comes with hose and bolts install kit
|
|
High Sensitivity Voltage Stabilizer |
FEATURES
----------------------------------------------------------------------------------------------------------------------- |
Improves Ignition Flow and Strengthens Starting Power
Stabilizes Voltage, Improves Engine Performance
Better Throttle Response
Improve Fuel Efficiency
Increase Headlight Brightness |
Virtually Increases House Power and Torque
Improve Audio Quality
Longer Battery Life Time
Specially Designed with High Water and Heat Resistance |
|
High Conductivity Copper Ground Wire |
FEATURES
----------------------------------------------------------------------------------------------------------------------- |
Made with High Quality Copper Material for Maximum Conductivity
1 X 25.00" (Overall Length) Ground Wire; with 24.50" (Distance of the 2 Centers of Connection Terminals)
2 X 33.00" (Overall Length) Ground Wire; with 32.50" (Distance of the 2 Centers of Connection Terminals)
2 X 40.50" (Overall Length) Ground Wire; with 40.00" (Distance of the 2 Centers of Connection Terminals)
Exactly the Same as Shown in the Picture |
High Quality Plastic Wrapped for Preventing Power Loss, Lowering any Electrical Resistance
i.e.Increase the Effectiveness of the Entire Electronic System
Essential especially for Any Vehicle with Engine Swaps since Grounding Tends to be an Issue with Performance Modifications
Design for Centralizing the Grounding Point of the Electrical Circuit of Vehicles
Essential especially for Any Vehicle with Engine Swaps since Grounding Tends to be an Issue with Performance Modifications
Mounting Kits Included |
|
16-Row 10 AN Oil Cooler |
FEATURES
----------------------------------------------------------------------------------------------------------------------- |
Usable to Cool Down Engine Oil, Transmission, and Rear-Differentials
Powder-Coated and Oxidized for Durability and Protection
Excellent for Modified Street Vehicles, which are Driven Hardly with Minimal Track Use
Potentially Reduces Oil Temperature up to 50°F |
Helps Reducing Coolant Temperature
Made with High Quality T-6061 Aluminum
Extends Engine Life
Overall Size: 13.00" x 6.00" x 2.00"
Core Size: 9.25" x 5.00" x 2.00"
Inlet / Outlet Size: 10 AN |
|
Oil Filter Relocation and Oil Line Kits |
FEATURES
----------------------------------------------------------------------------------------------------------------------- |
Made of High Quality Lightweight Aluminum with CNC Laser Cut
Increases Engine Oil Capacity Available; thus, Enhances Oil Lubrication and Protection of Engines
10-AN Male Fitting and 0.875” x 12.125” Bolt Pattern
Inner Hose Material: CPE Synthetic Material Tubing
Maximized Resistance to Heat, Corrosion and Abrasion |
Allows Installation of Larger Oil Filter
Oil Filter Relocation for Easier Access and Oil Change; a Must for Hard-To-Reach Oil Filters
Quality Stainless Steel Braided for Strong Reinforcement of Strength and Durability
Covered with High Quality Woven Nylon to Give a Cool Racing Appearance
Woven (Mechanism) Construction for Enhancing Flexibility |
|
Oil Drain Line |
FEATURES
----------------------------------------------------------------------------------------------------------------------- |
CNC Machined Turbo Adapter Plate
Stainless Steel Hose, Braided for Heat and Pressure Resistance, Strength and Durability
10AN Fittings |
Inner Diameter: 0.50"
Length: 17.00"
Weldable 10AN Oil Pan Fitting Included |
|
Oil Catch Tank |
FEATURES
----------------------------------------------------------------------------------------------------------------------- |
TIG Welded T-6061 Light-Weight Aluminum Construction
Light-Weight Filtered Breather Tank Design for Racing Applications
Clear Tube Indicator for Easy Visual of Checking if the Tank is Full |
Ensure Better Mileage, Better Performance and Preserve Engine Life
Catch Oil and Sludge to Save the Life of the Engine |
|
3" Mushroom Type Air Filter |
FEATURES
----------------------------------------------------------------------------------------------------------------------- |
Made of Reinforced Material and Covered with Chromed Finish for Lightweight and Durability
3" Filter Inlet, 3" Inner Diameter Pipe, 6" Overall Height
Performance: Improves Up to 95% Filtration Efficiency |
Micro High Density Foam Gauze Type Filter Material, Washable with Water or Soap, and Reusable
Worm Gear C-Clamp Included
For Intakes or Turbo Usages |
|
100% Brand New
Professional Installation is Highly Recommended
(No Instruction Included) |
APPLICATION
----------------------------------------------------------------------------------------------------------------------- |
90-01 Acura Integra
99-00 Honda Civic Si
94-97 Honda Del Sol VTEC
88-91 Honda Prelude
97-01 Honda CR-V
ALL Models Above with an I4 B-Series DOHC Engine ONLY
Please Check Compatibilities for Exact Years and Models |
PACKAGE INCLUDES
----------------------------------------------------------------------------------------------------------------------- |
1 X T04E Turbocharger
1 X Stainless Steel Turbo Manifold
1 X Lightweight Aluminum Intercooler
1 X B-/D-Series 2.5” Inlet/ Outlet Downpipe
1 X 60mm Wastegate with Spring
1 X Type-S Blow Off Valve Kit
1 X Flange Pipe
1 X Braided Oil Feed Line
1 X Adjustable Boost Controller
1 X Manifold Wrap
1 X Turbo Timer
1 X Fuel Pressure Regulator
1 X High Sensitivity Voltage Stabilizer
1 X High Conductivity Copper Ground Wire Kit
1 X 16-Row 10 AN Oil Cooler
1 X Oil Filter Relocation Kit and
3 X Oil Line
1 X Oil Drain Line
1 X Oil Catch Tank
1 X 3" Mushroom Type Air Filter
1 X Set of Aluminum Piping
Includes:
4 X Aluminum 2.5" Pipings
5 X Silicone Hoses
10 X Bolt-Tight Clamps
Hardware, such as Flanges, Clamps Gaskets and Bolts |
|
Professional Installation is Highly Recommended, Modification might be Required |
