|
Guaranteed to be fully working for 30 days. 24 amp rating. 18 foot cord. 6-50 Plug. Cord reel can be included for an additional $28 to cover shipping.
Simply Smart Wall Mount Design Electric Vehicle Supply Equipment (EVSE) provides the transfer of electrical energy from the utility to the vehicle. Level 2 charging (240 volt AC input) is the primary and preferred method for charging vehicles in residential and commercial facilities. The ECOtality design provides intelligent user-friendly features to easily and safely charge electric vehicles. Benefits of ECOtality’s Unique Binary Wall Mount Design • Simplifies the installation process • Convenient configuration for a wide variety of physical layouts • Easy to use, ADA compliant • Convenient cable management for long reach and storage between uses • Connector holster for protection and storage • Intuitive connector docking J1772 Standard EV Connector The SAE J1772 is the standard for electric vehicle charging in the United States. • Ergonomic design • Prevents accidental disconnection • Grounded pole - first to make contact, last to break contact • Designed for over 10,000 cycles • Can withstand being driven over by a vehicle • Safe in wet or dry use Energy Meter • Internal meter to monitor energy and demand usage • Supports energy usage data evaluation • Supports electric utility EV billing when certi ed to ANSI 12.20 and IEC standards Touch Screen • Convenient, user-friendly touch screen display • Charge status • Charge statistics and history • Easily programmable start/stop timing allows coordination with electric utility on/off peak time of use rates
Features • Charge circuit interruption device (CCID) with automatic test • Ground monitoring circuit • Nuisance-tripping avoidance and auto re-closure • Cold load pickup (randomized auto-restart following power outage) • Certi ed energy and demand metering • Wireless IEEE 802.11g • LAN capable • ZigBee SEP 1.0 capable AMI interface capable • Web-based bi-directional data flow • Cord management system Additional Features • Smart Phone Applications for status charges and notification of completion or interruption of charge • Controllable output to support utility demand response requests • Multiple input current settings to conveniently accommodate electric service capabilities
Equipment (EVSE) Specifications • Interlocks with EV drive system so EV cannot drive when connector is inserted in vehicle inlet • De-energizes EVSE if connector and cable are subjected to strain • Charge current interrupting device (CCID) with automatic test feature for personal protection • Connector parts are de-energized until latched in vehicle inlet • Meets all National Electric Code requirements Standards and Certifications • SAE J1772 compliant • NEC article 625 electric vehicle charging system • UL and ULc to 2594
24 Amps (maximum); 12A, 16A, 24A available Breaker: 40 Amps; settings at 15A/20A/30A available Voltage 208 VAC - 240 VAC +/- 10% SAE J1772-compliant; UL-rated at 24A maximum 18 feet (estimated) Wall Mount: 18” W x 22” H x 5-9/16” D Cord Mount: 18” Diameter NEMA Type 3R; sun-and-heat-resistant Wall-mount or pedestal |