Description Features: Car Rear View Camera Features Professional exterior waterproof car rear view camera Small compact size Low power consumption Low maintenance 7 infrared night vision LED Easy to install and operate Perfectly solve the issue of bad car rear view effect NOTE: The camera contains distance indicator line, can't not be used as front camera Monitor Features:  High-resolution picture Full color LED backlight display Low power consumption The LCD Monitor can replace your original reaview mirror With 2 video input connects to car DVD, VCR and other video equipment to car backup camera Parking rearview priority: The monitor will start up automatically, and synchronously display the video from rearview camera when you're backing your car IR remote control Controlled or by touching the screen buttons Specification: Camera Specifications: Sensor: PC1030 1/4 Inch Color CMOS TV system: NTSC Effective pixels: 628 X 582 pixels Scanning System: 2:1 Interlace Sync System: Internal Resolution: 420 TV lines Lens Angle: 2.8mm/120℃ Sensor Area: 5.961mm x 4.276mm Video Output: 1.0 VP-P,75 OHM S/N Ratio: More than 48db Water-proof: IP67 Minimum Illumination: 0.2Lux/F1.8(0 Lux with LED) Current Consumption: No more 300mA Power supply: DC 12V Operation Temperature: -20℃ ~ 70℃(RH95%Max.) Storage Temperature: -30℃- 60℃(RH95%Max.) Auto White Balance. Agc and BLC TFT LCD Monitor Specification: Screen Size: 7 inch Display Component: Color TFT-LCD Number of Dots: 480 x 234 Pixels Video Frequency: PAL/NTSC Video: Two way video input Input: DC 12V Cable Length: 190cm Color: Black Size： 9.4" x 3.5" x 1" Wireless 2.4GHz transmitter/receiver Set Specifications: : Work Range:Up to about 8m(Hollowness) Connects to rear-view camera and front video screen Fit all RCA composite video connections Power: DC 12V Transmitter/Receiver Cable Length:1.4m Take one minute get your camera become a wireless camera Convert any reversing camera with a standard phono/RCA connector into a wireless camera with this universal transmitter and receiver kit Eliminates the need to run a cable the length of the vehicle, just connect the transmitter at the camera end and the receiver at the monitor end The transmitter also includes a handy pass through for the power so you can connect it inline with your camera Wireless transmitter with male phono plug and male 3.5mm power plug for supplying power to the camera Wireless receiver with male phono plug for connection to monitor Wiring: What is included: 1 x 7" TFT LCD Monitor Mirror 1 x Power Cable 1 x Remote control 1 x Car Rear View Camera 1 x 2.4Ghz Wireless Transmitter 1 x 2.4Ghz Wireless Receiver