***Business Hours: Mon-Fri 8am-6pm Pacific Standard Time | 877-678-7173***

aFe Power F3 Torque Converter 1200 Stall 47RE 43-12011TORQU; 47RE; Dodge Dsl 94-02 L6-5.9L (td)

If you are looking to put your power to the pavement, you need our F3 Torque Converter. Torque converters are responsible for transferring engine power to the transmission. Single clutch OE torque converters can slip and increase transmission fluid temps. As you add engine performance parts like intakes, manifolds, etc. the factory torque converter?s stall RPM rises thus reducing the available low RPM pulling power. This is where the F3 torque converter comes in. Installing the F3 torque converter will lower your stall speed to as low as 1,200RPM giving you the perfect range for diesel trucks up to 1,000hp. The results of using an F3 torque converter are improved 0-60mph times (by up to 1-second), increases in towing speeds, lower transmission fluid temperatures and a more satisfying driving experience. Check out our full color, 4-page brochure at http://issuu.com/79603/docs/afe-power-f3-torque-converter-flyer.Customer Testimonial: ?I did not realize how much power was being lost prior to putting this on. In normal driving (empty truck), the acceleration improvement was very noticeable, especially when getting into 4th, 5th and 6th gears, it threw you into the back of the seat; shifts were nice and crisp. When towing my 10,000 lb. trailer, grades that in the past I could barely go 35-40 mph were now easily done at 50-55 mph.? Stuart M.3-Clutch System: The F3 Torque converters use a 3-clutch pack assembly which offers up to 3 times the torque capacity of the single clutch OE torque converter. This allows crisper shifts in high gears, smoother power transmission and improved pulling power while reducing transmission fluid temperatures.Round Clutch Tips: Round clutch tips are used to optimize fit and clutch wear. Custom Stator: A custom designed stator (with one-way sprag clutch) is used for torque multiplication to stall speed. Torrington Thrust Bearing: F3 Converters come with Torrington thrust bearings for maximum strength replacing the stock OE plastic bushings.Billet Steel Front Cover: The billet steel front cover is used for increased strength and durability over the factory stamped steel cover. This Billet cover prevents converter ballooning (failure) that is common with OE converters under high torque conditions.Brazed Turbine Fins: The turbine fins are responsible for transferring the torque from the engine to the transmission. The F3 turbine fins are brazed for maximum strength even under the harshest conditions and high torque transfer.Damping Springs: Damping Springs are used on the clutch assembly for a smooth power transition during acceleration, optimizing your available torque.Reinforced Housing: The one-piece stamp forged steel lid uses reinforced ribs for structural support and ultra-high torque capacity.Lifetime Warranty: The F3 torque converter comes with a limited lifetime warranty.Note: It is recommended to have this product installed by a qualified professional.

PDF 1

PDF 2

Product Information

advanced FLOW engineering (aFe) is a manufacturer of automotive cold air intake systems, performance air filters, fluid filters, intake manifolds turbochargers, programmers, throttle body spacers and exhaust systems. aFe was founded in 1999 and is headquartered in Corona, California, USA, in two facilities totaling 160,000 sq ft (15,000 m2) including their 77,000 sq ft (7,200 m2) headquarters and manufacturing facilities. An 87,000 sq ft (8,100 m2) warehouse and R&D facility was added in 2012.

Pictures

Have A Problem With Your Order?

* Please Contact Us Through eBay Or Call Us At 877-678-7173
* Please DO NOT Open A Case Or Leave Us Bad Feedback.

We work very hard to ensure every customer is happy with their order. Please give us the chance to make an issue correct for you. Bad feedback and claims hurt our company, so we ask you please come to us before taking either of these steps. Most issues are due to using an incorrect body shop (like a collision center) to install after market parts. Please keep in mind you are changing the look of your car, so issues can arise and a body shop needs to know how to handle these. Collision centers normally only do OEM and insurance work. Please take your car to an experienced after market body shop. If you do not have an after market body shop, please call us and we will be glad to find one for you no matter where you live!

Shipping

Delivery Time
* Shipping Time: 2-7 Business Days Depending On Location (lead time varies depending on product)
* Local Pickup Is Available. Please Contact Us To Arrange Local Pickup.

Shipping Cost
* Shipping Is Free Within The 48 Continental United States.
* Please Contact Us For International Shipping Quote.
* The Shipping Price Includes Full Shipping Insurance.

Returns and Exchanges

* Please call us at 877-678-7173, if you wish to return or exchange an item. All special ordered items are non-returnable.
* All items must be returned in original, resellable condition. Restocking fee will apply to cover original shipping costs.

Payment

* For your protection and our security, we will only ship to a CONFIRMED address.
* If you have a PayPal account and it is not confirmed, please contact PayPal to "confirm" your account and then purchase the item from us.
* If you do not have a PayPal account, please call us so we can guide you on how to pay with PayPal.

Business Hours: Monday-Friday 8am-6pm Pacific Standard Time (Please Know There Is A Time Difference Depending On Where You Are Calling From)

Telephone: 877-678-7173