Collinite Boat Care Products

Since 1912, Collinite Corporation has operated with one single purpose in mind: To provide the highest grade wax products possible regardless of costs. The quality of our Marine Wax products are second-to-none. The formulations have won the hearts, loyalty and recommendations of our customers.   Collinite Fiberglass Boat Cleaner No. 920 easily removes dirt, film, oxidation, oil, grease, rust and exhaust stains from fiberglass finishes. Collinite Fiberglass Boat Cleaner leaves a chemically clean surface providing a pristine bonding surface to apply your final wax or sealant.  Collinite Fiberglass Boat Cleaner restores the original color quickly without hard rubbing or buffing. It increases long-lasting brilliance and performance of your protective wax coating. Apply the 925 fiberglass boat wax or the 885 Fleetwax after the 920 has been buffed off for maximum protection.     Directions for use: Shake well before using. Apply cleaner with a microfiber towel folded into a pad, or with a microfiber applicator. Rub as necessary to loosen all film, discoloration, etc. Buff off the cleaner with a clean, dry, soft cloth. 16 fl. oz.     Collinite Fiberglass Boat Wax No. 925 goes on easy and stays on all season for a shiny deck, glistening topsides, and a super slippery bottom. Collinite Fiberglass Boat Wax is a special, heavy duty, detergent proof formulation providing a very high gloss. Collinite Fiberglass Boat Wax is an almost indestructible protective coating for fiberglass finishes of boats and motor homes.  Collinite Fiberglass Boat Wax insulates the surface against the adhesion of foreign elements and assures full protection against deterioration, sun, rain, salt spray, exhaust stains... almost anything your boat can get into. It's so slick it can increase your boat speed, and decrease gas cost due to less drag. Collinite Fiberglass Boat Wax contains a special pure Carnauba wax formula proven in harsh industrial environments. It will easily shrug off scrubbing, scuffing, detergents, salt water and marine organisms...all year long. Directions for use: Shake well before using. Clean fiberglass thoroughly with Collinite Fiberglass Boat Cleaner No. 920 or Metalwax Super Duty Metal Fiberglass boat Cleaner.             Apply Collinite Boat Wax with a clean, folded, soft microfiber cloth or microfiber applicator and allow to dry to a haze. Buff off cleaner haze with another clean, dry, soft microfiber towel to produce the brightest colors with unbelievable durability. 16 fl. oz.

Collinite Fiberglass Boat Cleaner No. 920 easily removes dirt, film, oxidation, oil, grease, rust and exhaust stains from fiberglass finishes. Collinite Fiberglass Boat Cleaner leaves a chemically clean surface providing a pristine bonding surface to apply your final wax or sealant.    Available in 16 oz. and half gallon sizes

.

Collinite Liquid Fleetwax No. 870 is an easily applied, almost indestructible, special, heavy-duty protective coating manufactured in limited quantities for those who demand the best. Collinite Liquid Fleetwax 870 cleans, protects and beautifies marine finishes in one easy operation. No hard rubbing or buffing is needed.

Collinite Paste Fleetwax No. 885 was developed especially to seal and shield against acid rain, sun, salt spray, bugs and other environmental acids. Designed for marine & aeronautical finishes, Collinite Paste Fleet Waxwill prevent finish deterioration and the adhesion of foreign elements.

Collinite Metal Wax No. 850 cleans, shines, and protects chrome, aluminum, copper, brass and stainless steel finishes in one easy operation. Collinite Metal Wax safely removes rust, tarnish, salt deposits, and heavy accumulations of film quickly and easily.

Helpful Hints for Using Collinite Marine Products: No matter which Collinite products you choose to use on your watercraft, here are some guidelines to help you get the most benefit. The ideal temperature range for using Collinite products is between 60 and 85 degrees.  Using the product when the temperature is less than 60 degrees could result in streaking or difficulty in removing the product from the finish.   Avoid Applying the product in direct sunlight.  Try to work in the shade.  The heat from the sun will accelerate the rate at which the wax sets up on your finish, and will make removing the product very difficult.  Make sure the finish is approximately between 68 and 70 degrees.
Make sure the finish is clean and dry before applying any wax to avoid creating swirls.   Wax in a straight line, following the pattern that air would pass over your boat.  Waxing in circles could lead to swirl marks.   Apply the product in small sections at a time, usually 2x2 or 3x3 foot areas at a time.   Use a soft-cotton cloth for your final buffing.  Turn the cloth frequently and try to buff using straight lines.

Powered by eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.