|
|
|
|
|
|
|
|
High Compression/ Boosting Turbocharger:
The objective of a turbocharger is to improve the engine's volumetric efficiency by solving the amount of air flow into the combustion chamber limitation. This ultimately results in an increased torque and output of the engine. A naturally aspirated automobile engine uses only the downward stroke of a piston to create an area of low pressure in order to draw air into the cylinder through the intake valves. The pressure in the atmosphere is about 1 atm (approximately 14.7 PSI),so there ultimately will be a limit to the pressure difference across the intake valves. This will also limit the amount of airflow entering the combustion chamber. Since the turbocharger increases the pressure at the point where air is entering the cylinder, a greater mass of air (oxygen) will be forced in as the inlet manifold pressure increases. The additional air/oxygen flow makes it possible to maintain the combustion chamber pressure and fuel/air load even at high engine revolution speeds, increasing the power and torque output of the engine.
36" Stainless Steel Braided Oil Feed Line:
Oil feed lines and returns lines are an essential part of any turbo system. Oil feed lines bring oil to the turbocharger, at the same time the oil cools and lubricates the moving parts. The Oil Drain Lines take the oil that has passed through the turbo and guides it back into the engine’s oil pan. Without these two components, the turbocharger’s internals would overheat or seize causing major complications.
Oil feed and oil return lines feature stainless steel braiding to resist heat, pressure, and expansion of the lines. Each kit comes with andonized ends or fittings for a clean show quality professional look.
High Compression/ Boosting Turbocharger: Capable of Boosting Horse Power up to 300+ BHPMinimum Estimated Power Gain: 75 - 100 HP20psi Efficient Torque Turbocharger High Quality Material, Cast Housing with Durable Steel
Exhaust (Turbo Manifold) Flange: | Standard T3 4-Bolt | Exhaust (Downpipe) Flange: | V-Band | Intake Inlet/ Outlet: | 4.00"/ 2.50" |
Compressor:Trim: | 55 | A/R: | 0.7 | Inducer/ Exducer (mm): | 66.36 / 81.87 |
Turbine:Trim: | 73 | A/R: | 0.82 | Inducer: | 73.60 / 64.50 |
36" Stainless Steel Braided Oil Feed Line: Stainless Steel Hose, Braided for Heat and Pressure Resistance, Strength and Durability10AN Fittings Anodized EndsInner Diameter: 0.25"Length: 36.00"1/8 NPT Fittings Natural Polish FinishCNC Machined Turbo Adapter PlateBrass Fitting, Block Fitting, and Port Cover Included
Includes:
1 x Turbocharger Kit1 x Braided Turbo Oil Feed LineHardware as Shown in the Picture Above
Notes:
100% Brand NewProfessional Installation is Highly RecommendedInstallation Instruction is NOT Included
|
|
Payment Options: |
|
Shipping Options: |
DPT Motor Sport will ship your order by either UPS or USPS |
Shipment Coverage: |
USA Lower 48 states, Canada (Currently DPT Motor Sport DOES NOT ship to APO/ FPO addresses) |
Sales Tax: |
9.00% for buyers located in California |
|
Check-Out Now!
Click the Pay Now button at the top of this listing to immediately proceed with our checkout and payment process. Please note that the Pay Now button is ONLY available after winning an auction or completing a Buy It Now purchase.
Check-Out Later
If you do not choose to Check-Out now, you will be notified by eBay via e-mail that you are the winning bidder. There is no need to contact us to arrange payment. We will automatically send you an e-mail within 24 hours of an auction closing. Our message will contain a link to our simple and secure checkout system, where you will be able to quickly and conveniently pay for your purchase. You may also continue purchasing additional items from our auctions or eBay store.
You have 5 days from the end of the first purchase to add additional items to your order. Make sure all of your auctions have ended prior to checking out. All of your purchases will be consolidated into one checkout! |
|
Shipping Methods
All shipments are made via either UPS or United States Postal Service depending on the types of products purchased. Majority of our orders will be ship within 2 business days (mostly within 24hrs) (All mail transit time stated above is best estimated but not guaranteed.) All shipments requires physical addresses, no PO Box address will be shipped.
Shipping and handling charges are not negotiable.
Payment
We accept PayPal only.
We reserve the right to file Non-Paying Bidder if payment is not received 10 days after the auction ended.
Return Policy
**We stand behind the products we sell. If for any reason you are not satisfied with your purchase, we'll be happy to process an exchange or refund the product less S&H within 30 Days of your purchase.
All return items will require a RMA number, which is given by our Customer Service Department only. Please allow 10-14 days for returns and exchange to be process.
Please inspect all your order(s) upon receipt.
All return items MUST be in brand new condition which means the item is never installed and kept in the original packaging, otherwise you will be subjected to a 20% restocking fee.
We will not reship replacement(s) before we get a claim approval for the lost or stolen item(s) or the returned item from customers. In most cases, all shipping and handling fees are non-refundable, unless it has been approved by our Customer Service Department.
Any item(s) that the buyer states as defective will be tested by our Returns Department, if there is no problems or errors found during testing, there will be a mandatory 20% restocking fee for the price of the item.
Once the RMA# is issued, the buyer will have 30 days to return the item, if any items that is return after 30 days, the item(s) are subject for rejection. If the items are returned without an RMA#, we reserve the rights to reject the item or charge the buyer a 20% restocking fee.
All items are brand new unless otherwise stated.
PROFESSIONAL installation is highly recommended. Buyer assumes all risk on usage.
Have any questions or need info about something you already purchased? We'd love to hear from you! For items already purchased, please kindly include your eBay item number for faster response time.
DPT Motorsport operates from Monday through Friday, 10 am to 6 pm (PST).
ATTENTION: We are closed on Saturdays and Sundays.
All messages will be replied in the order it was received during business days.
Thank you for choosing DPT Motorsport and happy bidding!
| |
| | |