(1) Redline Fuel Pressure Regulator w/fittings

• (3) Barbed fittings for use with 5/16" (8mm) fuel line
• (1) Plug to block off unused outlet if desired

This is for use with any Weber (or just about any model of carburetor). Many problems with tuning carburetors can be traced back to the fuel pressure being too high.

This very popular fuel pressure regulator will work in almost any application. It will work on applications that require fuel pressure between .8 and 7.0 psi. The inlet and outlet are fittings are 5/16" (8mm). This regulator can also be fitted with a fuel pressure gauge.

This 3-port fuel pressure regulator is the most popular design due to its simple in-line installation, adjustability and high flow rate. This regulator uses a standard or dead head design making the installation very simple and straight forward, since plumbing a return back to the tank or fuel cell is NOT required. This regulator features a 2-piece anodized billet aluminum body. The large top mount adjustor screw and lock nut make adjusting the fuel pressure a quick and easy task. The extra-large diaphragm produces a very stable pressure over a wider than normal range of 1 (.8) to 7 PSI, without creep or fall off. This regulator features single bottom inlet and twin side outlet ports all with 3/8” NPT female threads, allowing it to be used in either single or multiple carburetor applications. This fuel pressure regulator also features a 1/8” NPT female threaded port for mounting a fuel pressure gauge. This regulator is compatible with gasoline and Ethanol blends including E85. This is NOT compatible with Methanol fuels

                                

 part number: 31800.050kit