Gm B107pt Chipkey CKB107PT
  • Free Tech Support
  • Guaranteed To Work
  • Tested Before Shipping

Ckb107pt Tags: B107pt Pt04pt 691205 Pk3 5902386 693138

This is a PK3 transponder key with B107 keyblade. Get a local locksmith to cut the key to work your vehicle. Then follow the instructions below to program your vehicle to start with the new key.

If you have one working transponder key:
1. Switch ignition to ON with master key.
2. Switch ignition to OFF and remove key.
3. Within 10 seconds insert new key.
4. Switch ignition to ON. New key should now be programmed.

If you have no working transponder key:
1. Make sure the vehicle’s battery is fully charged. Put key in ignition and crank engine for a fraction of a second and leave the key in the ON position for exactly 10 minutes.
2. Turn OFF and remove key.
3. Put key in ignition and crank engine for a fraction of a second and leave the key in the ON position for exactly 10 minutes.
4. Turn OFF and remove key.
5. Put key in ignition and crank engine for a fraction of a second and leave the key in the ON position for exactly 10 minutes.
6. Turn OFF and remove key. New key should now be programmed.

Troubleshooting:
- If the first procedure is not working then when it says to turn ignition to ON, instead go further and crank the engine for a moment but not long enough that the engine starts.
- If the above procedures seem to work but then the key only works for a minute then clean the key blade with alcohol and a brush (like brillo or steel wool.)
- If you are doing the first procedure make sure you put the old key first. If you put the new key first you can either cancel the procedure or on some models cancel the first key.
- The car battery has to be in charged well before you begin. If the car battery is weak it can cancel the procedure or on some models cancel a working key.

Ckb107pt Tags: B107pt Pt04pt 691205 Pk3 5902386 693138

This is a PK3 transponder key with B107 keyblade. Get a local locksmith to cut the key to work your vehicle. Then follow the instructions below to program your vehicle to start with the new key.

If you have one working transponder key:
1. Switch ignition to ON with master key.
2. Switch ignition to OFF and remove key.
3. Within 10 seconds insert new key.
4. Switch ignition to ON. New key should now be programmed.

If you have no working transponder key:
1. Make sure the vehicle’s battery is fully charged. Put key in ignition and crank engine for a fraction of a second and leave the key in the ON position for exactly 10 minutes.
2. Turn OFF and remove key.
3. Put key in ignition and crank engine for a fraction of a second and leave the key in the ON position for exactly 10 minutes.
4. Turn OFF and remove key.
5. Put key in ignition and crank engine for a fraction of a second and leave the key in the ON position for exactly 10 minutes.
6. Turn OFF and remove key. New key should now be programmed.

Troubleshooting:
- If the first procedure is not working then when it says to turn ignition to ON, instead go further and crank the engine for a moment but not long enough that the engine starts.
- If the above procedures seem to work but then the key only works for a minute then clean the key blade with alcohol and a brush (like brillo or steel wool.)
- If you are doing the first procedure make sure you put the old key first. If you put the new key first you can either cancel the procedure or on some models cancel the first key.
- The car battery has to be in charged well before you begin. If the car battery is weak it can cancel the procedure or on some models cancel a working key.

Specification
Manufacture Generic
Condition New
Part #CKB107PT
Mfg Part #B107PT
We accept: PayPal

    OVERVIEW

    At Remotes And Keys we make returns as easy as possible. Our mission is to provide you with the best products and the best service in the industry. We understand that sometimes, customers change their minds about products that they order or simply do not need them anymore. We also know that customers are cautious about Return Policies since they are often tricky and misleading. Our goal is to make the return or exchange process trustworthy and as simple as 1-2-3.

    RETURN POLICY

    If for any reason you are not completely satisfied with your purchase, you may return the item within 30 days of delivery of your order.

    The following rules apply:

    • Products must be in original packaging and in a new and resellable condition.
    • Any product that was used or fully/partially installed is non-returnable.
    • Shipping Fees are non-refundable.
    • All returns must be made via our Return Procedure by filling out an RMA form in the MY ACCOUNT section.
    • There are few non-returnable products & services that may be offered on our website. It will indicate clearly in the product description if a different return policy applies.
    • Order cancellations can only be requested prior to shipment or in some cases.
    • If the return of an item was caused by an error on our or a manufacturer's part, we will cover the shipping fees.

    RETURN PROCEDURE

    To return a product, you must first request a Return Merchandise Authorization (RMA) that is located in the MY ACCOUNT section next to each order item that you want to return. The RMA form will include an exact return address and detailed instructions on how to return a product. Please allow 24 to 72 hours for processing your claim.

    EXCHANGE PROCEDURE

    There are 2 ways you can go about exchanging a product:

    • Option 1 (Slower) - Use the standard return procedure to request an RMA for the part you need exchanged. In your request please specify the exact item(s) you would like to exchange to. Upon receipt of your returned product we will process an exchange and ship the new part. If there is a difference in the price, you will be either refunded or charged the difference.
    • Option 2 (Faster) - Order the new part over the phone and request to include a prepaid label to send back the first purchase for refund.

    DEFECTIVE, DAMAGED, OR INCORRECT PRODUCTS

    We all know that accidents happen sometimes. If your product(s) will arrive defective, damaged, or simply incorrect, please contact our customer service department as soon as possible. Please do not attempt to use or install the part! We will send you a replacement part and provide you with a prepaid return label to return the defective part. Product(s) must be returned to us within 30 days. If the damage was caused by a shipping courier, we will schedule a damage pick up by the courier.

    ORDER CANCELLATIONS

    When you request a cancellation of an order or a part it may take up to 24 business hours to process your cancellation claim. This process may involve voiding orders in computer systems, removing items from backorder logs, having operations personnel pull items from production schedules and sometimes stopping orders at the shipping dock. Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of your cancellation.

    REFUNDS & CREDITS

    After we accept your return, you will be issued a refund via the same method as you had originally used to place the order. The refund amount will be composed of the original purchase price minus shipping charges. You will be sent an confirming receipt of the return and your . Please allow an additional 5-7 days for the to appear on your account.

      There once was a car salesman true, whose wits would get truly blue
      When many cars on the lot were sold, and he - to the customer - told
      “There was but one set of keys, can you deal with it please?”
      “No,” they’d reply "or else we will say goodbye."

      The dashing young salesman priced out the cost then spoke to his boss
      “Profit and loss, your proposed financial loss offends - like anchovy sauce”
      “Find a cheaper way but for now, go away” was what he took away.
      Sitting in the Cabriolet in the mid-summer day his thoughts were underway.
      He knew he’d find a better way.

      The Dealership Parts Department wanted one’s first born for the Remote
      And if scan tool programming required, you’ll need to pawn your fur coat.
      Brave young car salesman, devoted he be,
      Struck out on his own to save money for thee.

      Sourcing keyless entry remote transmitters and selling them for cheap
      Providing second to none tech support from morning to sleep.
      Fast forward more than a decade, Hundreds of Thousands orders deep
      If Key Fob Remotes and Transponder Keys were food, Bon-Appetite!


      Phone 386-586-3650
      Fax: 718-228-8876
      Monday-Friday 9am-6pm Eastern
      E:

        Shopping Cart Elite Powered by Shopping Cart Elite