Specifications:
Condition: 100% Brand new
Name: Auto glass Repair combination
Color: as pictures show
Material: Resin & PVC
Advantages:
1. To prevent holes or cracks widen, to ensure traffic safety.
2. Without dismantling, avoid bad seal and replace damaged vehicle glass.
3. Reduce waste glass, comply with environmental trends.
4. durable repair and restore the original strength of the glass, improve the appearance, clarity of up to 95%.
5. DIY self-repair, on-site construction, repair quickly and save time.
6. For you save money of replacement glass.
7. Prevents damage spread．
8. Allows anyone to fix a damaged windshield or window.
Repair liquid:
Using the highest purity repair liquid to ensure the performance of your
construction after construction, no crack, no yellow and transparent
better.
Repair range:
Car windshield, window glass, building glass, all kinds of glass damage.
Instructions:
Condition: 100% Brand new
Name: Auto glass Repair combination
Color: as pictures show
Material: Resin & PVC
Advantages:
1. To prevent holes or cracks widen, to ensure traffic safety.
2. Without dismantling, avoid bad seal and replace damaged vehicle glass.
3. Reduce waste glass, comply with environmental trends.
4. durable repair and restore the original strength of the glass, improve the appearance, clarity of up to 95%.
5. DIY self-repair, on-site construction, repair quickly and save time.
6. For you save money of replacement glass.
7. Prevents damage spread．
8. Allows anyone to fix a damaged windshield or window.
Repair liquid:
Using the highest purity repair liquid to ensure the performance of your
construction after construction, no crack, no yellow and transparent
better.
Repair range:
Car windshield, window glass, building glass, all kinds of glass damage.
Instructions:
Step 1: Clean
the damaged place, ensure no water vapor in the damage place, at 45 ° C
the glass surface will help repair resin infiltration.
Step 2: The center of suction cup bracket is aligned at a damage place and fixed.
Step 3: Pressure rods, injection hose
The pressure rod is inserted injection pressure hoses, screwed in the end the Ministry.
Step 4: Drops 2-3 repair liquid at the injection hose
Step 5:
The injection hose bracket screwed to ensure white rubber head against the
glass (Note: You can not let the rubber head deformed, so that the resin
does not bleed out)
Step 6: Removed the pressure rods, you need to slow in this process, to form a vacuum process.
Step 7: After removing the pressure rods and then drops 3 drops of repair solution at the injection hose.
Step 8: Tighten the pressure rods, can not twist in the bottom. general distance the bottom 1 cm , then hold for about 1 hour.
Step 9: Removed plastic injection device and immediately drop a repair liquid at the repair place.
Step 10: Paste
the Solidify film, then use the razor blade scrape several times on the
Solidify film, so that the layer becomes thinner, it can help to
Solidify.
Step 11: Removed
the mend part to the sunshine place Irradiated 10 minutes (only
covering with the cured film can be use). After curing scrape off the
excess glue.
Package included:
glass (Note: You can not let the rubber head deformed, so that the resin
does not bleed out)
Step 6: Removed the pressure rods, you need to slow in this process, to form a vacuum process.
Step 7: After removing the pressure rods and then drops 3 drops of repair solution at the injection hose.
Step 8: Tighten the pressure rods, can not twist in the bottom. general distance the bottom 1 cm , then hold for about 1 hour.
Step 9: Removed plastic injection device and immediately drop a repair liquid at the repair place.
Step 10: Paste
the Solidify film, then use the razor blade scrape several times on the
Solidify film, so that the layer becomes thinner, it can help to
Solidify.
Step 11: Removed
the mend part to the sunshine place Irradiated 10 minutes (only
covering with the cured film can be use). After curing scrape off the
excess glue.
Package included:
1X plastic injection bracket
1X plastic injection device
1X pressure rod
1X repair filler
1X blade
2X cured film
1X plastic injection device
1X pressure rod
1X repair filler
1X blade
2X cured film
- We accept PayPal only.
- We only ship item to your PayPal verified address.
- Payment must be received within 3 days from the date of purchase.
- Orders will be processed instantly and dispatched in same day normally, so we do NOT accept any Email/Message note after you place orders.
This is the description of Returns Policy.
Do not dismiss your dream.
To be without dream is to be without hope.
To be without hope is to be without purpose.
Do not run through your life so fast that you forget not only where you have been, but also where you are
going.
Life is not race, but a journey to be savored each step of the way.
- Any questions, pls. contact us via ebay message or email us.We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again because sometimes our message system may block some emails.
- If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all "5 stars" in very area.
- Our aim is to provide Top Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy.
- We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.Thanks!
We will always do our up most to exceed your expectations in customer service, communication and dispatching of your orders.
