EcoOBD2 Benzine Car Green Chip Tuning Box for Lower Fuel Consumption & Emission

- Up to 15% fuel savings

- EcoOBD2 is very easy to use

- Plug EcoOBD2 into OBD2 connector of your car. And turn the ignition on for 30 seconds. And Turn the engine on

- EcoOBD2 settings are optimal and the best for your car. Even the parameters are different for each vehicle

- There might not be a need to make an additional adjustment

- EcoOBD2 will recognize your vehicle and your driving habits after around 200 km/150 miles driving

- And then EcoOBD2 adjusts itself to match your car perfectly

EcoOBD2 works on the basis of changing the signal form ECU. As a consequence, it changes the whole injection map. The main difference between EcoOBD2 Chip Tuning Box and Remapping tuning methods is that EcoOBD2 Chip Tuning Box is easily removable, and after unplug you go back to the factory settings. EcoOBD2 is the cheap and safe type of tuning. Remapping is a permanent change to your car. This is the expensive tuning and you cannot remove it. EcoOBD2 is equipped with the engine protection function and 100% safe for your car engine. EcoOBD2 produced on the printed circuit board in SMD technology. EcoOBD2 Chip Tuning Boxes are high quality.

Installation and Calibration:

1. Pull the Car Key out from the ignition.

2. Find OBD2 connector(*) in your car and Plug in EcoOBD2

3. Insert the key into the ignition and twist the key to the first stage. (Do not start the car)

4. Press the reset buttom for about 5 sec. After releasing the buttom, just wait for a while about 30-54 sec. (EcoOBD2 will communicate and establish connection with ECU)

5. Start up the engine.

6. EcoOBD2 will recognize your vehicle and your driving habits, after around 200 km/150 miles driving and thus EcoOBD2 will adjust itself to match your car perfectly for more fuel saving.

Each device available for LPG.

Does your car have OBD2 connector?

On-Board Diagnostics, or "OBD," is a computer-based system built into all 1996 and later light-duty vehicles and trucks, as required by the Clean Air Act Amendments of 1990. OBD systems are designed to monitor the performance of some of an engine's major components including those responsible for controlling emissions.

OBD2 necessarily for cars:

- Sold after January 1, 1996 in the USA

- Sold after January 1, 2001 in the European Union

- With Benzin engine sold after January 1, 2003