MSD Ignition Kit - Digital 6AL/Distributor/Wires/Coil/ Cadillac 368/425/472/500
Full Size Image
SK Speed Part Number: M469008
This listing is for a COMPLETE MSD Ignition System for your Cadillac 368/425/472/500 V8 Engines! This kit is made for carbureted engines that do not have computer control. Will not work with Factory Computer Controlled Vehicles Digital 6AL Ignition Box - Part #6425 MSD started with a clean slate and drew up plans for an all new housing. They kept the same footprint as the traditional 6AL but lowered the profile for a sleek look. The wiring is all routed out one end of the unit through a sealed and locking connector. This eases installation and keeps your wiring looking neat and clean. The rev limiter was moved right on top of the housing for easy access to the two rotary dials to set the limit in 100 rpm increments. Inside the Digital 6AL you’ll find a microprocessor that monitors and controls every firing and rev limit. The circuits are updated with efficient components that help the ignition produce more power while drawing less current! In fact, the new Digital 6AL delivers over 530 volts to the coil with up to 135mJ of spark energy for every firing! Increased output combined with MSD’s proven multiple spark series is a win-win situation! The new Digital 6AL are supplied with the wiring harness and the components you’ll need for installation. The 6AL is also supplied with vibration mounts. Both ignitions are compatible on 4, 6 or 8-cylinder engines with 12-volt, negative ground electrical systems. They’ll accept trigger inputs from breaker points, amplifiers and magnetic pickups. Pro-Billet Distributor - Part #8363 The best distributor on the market! The housing is machined from a billet of 6061-T6 aluminum on a state-of-the-art CNC machine producing exact tolerances. For high rpm stability, a .500” steel shaft is supported by a sealed ball bearing and a long sintered bushing. This shaft also receives a QPQ coating for friction reduction and resistance to corrosion. A precision machined reluctor is attached to the shaft which triggers the magnetic pick-up mounted in the housing. This high output magnetic pick-up is the most accurate way to trigger your ignition. Plus, with no moving parts to wear or adjust, the pick-up is maintenance free! Just above the pick-up is MSD’s adjustable mechanical advance assembly. Different springs and stop bushings are supplied so you can tune an advance curve to match your application. 8.5mm Super Conductor Wire Set - Part #35379 The MSD 8.5mm Super Conductor Wire is "the" performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12" length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, MSD uses a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. These wires have a Multi-Angle bendable end at the spark plug. A coil wire is included as well. PLEASE NOTE: These wires will not fit in factory wire looms and are made to drape over the valve covers. We can also supply you with a universal set where you cut and make the wire lengths yourself. If you need this set instead (part #31199), please let us know in the notes section when buying. These wires will come with Multi-Angle at the spark plug. Blaster 2 Performance Ignition Coil - Part #8202 If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD Blaster Ignition, MSD 5, 6 or 7, the Blaster Coil line is the right choice. All of the Blaster Coils are designed for improved spark output! Special 100:1 windings are used to provide maximum build-up of voltage! These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the Blaster Coil available. All of them have the same internal specifications, but have different housings or components. Each Blaster Coil can be used with a stock ignition, Blaster Ignition, MSD 5, 6 or 7 Ignition Control. Universal Ignition Coil Bracket - Part #8213 The MSD Coil Bracket offers easy, universal mounting for standard size ignition coils up to 2.25” in diameter. The Bracket uses a bolt and nut combination instead of the easily stripped self-tapping screw common on other brand brackets.
SK Speed Part # M469008
Included is an MSD Digital 6AL Ignition Box (6425), Pro-Billet Distributor (8363) with Vacuum Advance, 8.5mm Super Conductor Wire Set (35379), Blaster 2 Ignition Coil (8202), and an MSD Coil bracket (8213). We've put together a complete kit to take the guess work out of choosing the right components for your performance Caddy Engine!
Click Here for Installation Instructions! (If Available)
About Us
We have been selling everything High Performance for over 50 years! Starting from a small garage in the 50's to the beautiful new 6000sq ft showroom we have today, customer service has always been a top priority. We strive for 100% customer satisfaction.
Payment
We accept the following forms of payment:
PayPal
Credit Cards
You can call us toll free at 1-800-846-4252 Ext. 9 to process a credit card payment over the phone. We can only process Domestic credit cards. International orders can only be paid with Paypal at this time.
Shipping
Some of our items normally dropship from the manufacturer, As such the Estimated Shipping Time Ebay shows may be incorrect! For international customers, we may have to order these in to our location before shipping out, which delays shipping times. Contact us for an accurate shipping time.
Domestic:
For Domestic shipments, we ship via UPS, FedEx or USPS as stated in the listing.
For Alaska, Hawaii, Puerto Rico and US Overseas Customers, Our Ebay Shipping Calculator has problems automatically showing shipping for these locations, but we can ship to you! Message us!
UPS and FedEx cannot ship to P.O. Boxes, so please provide an alternate ship-to address with your payment.
Expedited shipping is available from UPS and USPS, please email us for a shipping price if needed.
A tracking or delivery confirmation number will always be provided once your item(s) ships.
NOTE: Due to the sheer volume of packages that we ship each day, we cannot track every package once it leaves our facility. It is up to the buyer to notify us about any in-transit problems. We will gladly assist in any claims with the carrier that we used to ship your item(s).
International:
For International shipments, we ship via UPS, USPS or DHL. Which carrier is used depends on your location. We will choose the carrier that will deliver the quickest for your location. We cannot declare lower customs values for legal and insurance reasons. We can not and will not declare an item as a gift. Buyer is responsible or all taxes, duties and fees for their country. If a shipment is refused because the taxes, duties and/or fees are not paid, realize that we cannot issue a refund unless we have the merchandise shipped back to us by the customer.
Please provide a valid phone number with International orders as the shipping carriers will, at times, need to contact you for more information.
Terms
The fitment data in many of our listings comes direct from the manufacturer. We strive for accuracy, however, there could be discrepancies on the manufacturers end with listing applications. PLEASE MESSAGE US WITH ANY QUESTIONS OR CONCERNS ABOUT YEAR/MAKE/MODEL INFO IF YOU NEED!!
Warranty Claims >
All warranties, expressed or implied, is that of the manufacturer NOT Espeedshop/SK Speed. That said, we will assist in processing a claim. Some warranty claims can be handled by us, but most must be submitted directly to the manufacturer. In either case, we will assist in the process. No warranty of any kind is offered or implied for parts that are discontinued, new-old stock, or used.
Returns
Please send us a message here on ebay or call us toll free at 1-800-846-4252 Ext. 9 to obtain an RMA (Return Merchandise Authorization) number before sending any merchandise back to us. Issued RMA numbers will only be valid for 30 days.
Return requests must be made within 14 days of purchase, and a refund will not be processed until inspected upon return to us. Returns must be in new, resellable condition.
Returned item(s) must be in a shipping box, not shipped in the factory packaged box that the item comes from the factory. If an item is shipped back to us for a return without the original factory supplied box, a 20% re-stocking fee will automatically be applied.
Returns of electrical items must be in "as-new" and still remain factory sealed. A testing and re-stocking fee of at least 20% will apply if the item does not meet these requirements.
