Races are won or lost at the starting line, so make sure you come out ahead with a High Performance Torque Converter. Whether you are looking for a street, strip, racing, or just plain heavy duty converter, these units will deliver lasting performance in your 727 Torqueflite. With features like welded internals, oversized bearings, and hardened hubs, you can rest assured that these torque converters are of the highest quality possible.
High stall converters are designed for S/B or B/B cars with performance camshafts and high ratio rear end gears (3.55-3.73 minimum). This converter is 11" and for a 10" flex plate. It has 5/16" bolts but can be drilled and tapped to 7/16".
- 2800-3200 stall - 11" diameter, 24 spline
- 1967-81 Chrysler TF-727
All stall ranges will vary depending on the engine setup, vehicle weight, and gear ratios.
Made in the U.S.A.
To learn about how torque converters work and what to consider when purchasing one, check out our tech article. Choosing the Right Torque Converter.
Item Details
Mildly modified S/B or B/B cars with high rise dual plane intake with 300-400 ft lbs torque, weighing 2900-3600 lbs., cam adv lift about .500" with 3.55-3.73 gears- Hardened Hub
- Increased durability through the allowance of tighter tolerances and clean fit with transmission seals
- Welded Impeller
- Stronger pump fins to maintain stall speed over the life of the converter
- Heavy-Duty Stators
- Heat treated fins, sprag and race designed to efficiently handle high power loads
- Stator fins are formed, not cut - cut stators can cause severe slippage
- Rapidly dissipates heat - more power to the wheels
- Welded Turbines
- Pre-stressed before welding - more rigid construction
- Heat treated splines
- Aluminum Spacers
- Incorporates aircraft quality aluminum spacers which handle higher loads than fiber spacers found in standard converters
- Oversized Bearings
- High strength stamped bearings absorb shock and extreme abuse better than standard waffle bearings
- High Tech Welds
- Positive-charged, military grade MIG welds for complete fusion of the metal
Chrysler 727 converters are recommended for use on mildly modified 2900-3600 lb. cars with S/B or B/B V-8 with a high rise dual plane intake producing minimum 300-400 ft lbs of torque. Camshaft advertised lift should be about .500" and rear gears in the 3.55 to 3.73 range.
All advertised stall ranges will vary depending on your engine's setup and the weight of your vehicle. If your car is heavier than the recommendation, the stall speed will be higher. If the car is lighter, stall speed will be at a lower RPM.
Shipping Policy:
- Please pay for all items at the same time.
- If shipping rates do not combine properly, contact us or send a buyer requested total.
- You must contact us before making payment to combine your items.
- Failure to do so will result in separate shipping fees for each individual item.
- We cannot combine your order if you have already paid.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS. All exchanges need to have reshipping charges included.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, video tapes, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
- Accepted Payment Methods - PayPal and major credit cards are accepted. Sales tax at 7.25% will apply for customers in Nebraska, 7.0% for customers in Indiana, and 6.0% for customers in Kentucky.
- Terms - Payment is required before shipment and must be received within seven (7) days.
