2" 52mm Universal Car Motor Black Shell Oil Pressure Gauge 0-100 PSL White LED 3

2" 52mm Universal Car Motor Black Shell Oil Pressure Gauge 0-100 PSL White LED 3
2" 52mm Universal Car Motor Black Shell Oil Pressure Gauge 0-100 PSL White LED 3
2" 52mm Universal Car Motor Black Shell Oil Pressure Gauge 0-100 PSL White LED 3
2" 52mm Universal Car Motor Black Shell Oil Pressure Gauge 0-100 PSL White LED 3
2" 52mm Universal Car Motor Black Shell Oil Pressure Gauge 0-100 PSL White LED 3
2" 52mm Universal Car Motor Black Shell Oil Pressure Gauge 0-100 PSL White LED 3
2" 52mm Universal Car Motor Black Shell Oil Pressure Gauge 0-100 PSL White LED 3
2" 52mm Universal Car Motor Black Shell Oil Pressure Gauge 0-100 PSL White LED 3
2" 52mm Universal Car Motor Black Shell Oil Pressure Gauge 0-100 PSL White LED 3
2" 52mm Universal Car Motor Black Shell Oil Pressure Gauge 0-100 PSL White LED 3

Oil Pressure Gauge(Electical)
The oil pressure gauge measures the engine's oil pressure and it can alert you,usually before the dash warning light would, to a problem that may cause a breakdown that would result in costly repair.

A lower than normal operating oil pressure indicates a low oil level,incorrect oil viscosity(too thin),a plugged oil pick-up scree, exessive mechanical wera of engine parts,oil leaks,or extreme overheating.

A higher than normal operating oil pressure in dicates blocked oil passage(s).dirty oil, a plugged oil cooler filter, incorrect oil viscosity(too thick), or failure of the oil pressure relief valve.

Specification:

  • 100% New

  • Numbers and pointer clearly show  

  • lighting on the dial for easy reading in the darkness

  • High sensitivity and easy operation

  • Professional installation is Highly Recommended

  • Oil pressure gauge indicates:

  1. Low Oil Level;

  2. Clogged oil filter;

  3. Loose or broken oil line;

  4. Oil foaming;

  5. Improper oil viscosity;

  6. Engine bearing failure

  • Assembly Procedure:

  1. A2-1/16" hole is required for indash mounting.

  2. Use 18-guage wire to connect ground,sender and ignition wires as shown on circuit diagram above,CAUTION:disconnect battery ground cable to avoid accidental grounding of electrical system while making electrical connections to the guage.

    The sending unit is usually installed in the same hole from which the warning light sender in removed.

Package include:

  • 1* Oil Pressure Gauge

  • 1* Pressure Sensor

  • 1* Instruction