******BUY FACTORY DIRECT*****
MOTORCYCLE SUSPENSION LIMIT
FRONTEND LOWERING STRAP
DRAG RACER SPECIAL
FAST 1-3 DAY USPS PRIORITY MAIL INCLUDED!!!
(APPLIES TO U.S STATES ONLY, INTERNATIONAL IS JUST A FEW MORE DAYS)
NHRA IHRA MiROCK CMDRA WMDRA PMRA NHDRO AMRA ADRL AHDRA AMA PROSTAR DRAGBIKE IDBL APPROVED!!!!
THESE STRAPS CAN REMAIN ON YOUR MOTORCYCLE WHEN DONE RACING. JUST A PUSH OF THE CAMBUCKLE LEVER AND YOUR BIKE WILL RETURN TO ITS NATURAL RIDE HEIGHT. NOW YOU CAN CRUISE AROUND WITHOUT DISRUPTING HANDLING OR STEERING. THEN WHEN THE TIME COMES, JUST A PUSH DOWN ON FRONT SUSPENSION WHILE PULLING THE STRAP HANDLE AND....BAM!! YOU ARE NOW ARMED AND READY TO TAKE CARE OF THAT LATE NIGHT "SITUATION" THAT NEEDS SOME ATTENTION.
THESE STRAPS ELIMINATE WHEELIES FOR LOWER 60' AND QUICKER E.T'S.
THEY WORK BY PRELOADING THE FRONT END TO PREVENT THE "HAMMER" EFFECT WHICH OCURES WHEN LAUNCHING HARD.
STRAP SPECS:
1" PRESS RELEASE CAM BUCKLE
- PRE DRILLED BOLT PLATES AT THE ENDS
4.5' OVERALL LENGTH
6500LB. TEST NYLON WEBBING
2180LB. RATED CAM-BUCKLE
DON'T SETTLE FOR SECOND BEST:
PROUDLY MADE IN THE U.S.A!!!!!!!
20% STRONGER THAN ANY OTHER STRAP ON THE MARKET!
BUY THE BEST!!!
SUPER FAST INTERNATIONAL SHIPPER
SIMPLE UNIVERSAL INSTALL
JUST BOLT ONE END OF THE STRAP TO THE TOP LEFT FRONT BRAKE CALIPER BOLT. RUN THE STRAP UP AND OVER THE NECK OF THE FRAME (BETWEEN TOP OF GAS TANK AND TRIPLE TREE) AND DOWN TO THE TOP RIGHT CALIPER MOUNTING BOLT. COMPRESS THE FRONT SUSPENSION WHILE PULLING ON THE STRAP HANDLE (THIS WILL KEEP YOUR SUSPENSION COMPRESSED AND HELP KEEP YOUR FRONT END FROM COMING UP DURING HARD LAUNCHES). WHEN YOU ARE DONE RACING, SIMPLY PRESS THE LEVER ON THE CAM BUCKLE AND YOU WILL NOW BE BACK TO STOCK RIDE HEIGHT. NO NEED TO REMOVE THIS FROM THE BIKE COMPLETELY (UNLESS YOU WANT TO) THIS WAY IT IS ALWAYS THERE READY FOR ACTION.
*NEWER STYLE BIKES WITH RADIALLY MOUNTED BRAKE CALIPERS MAY REQUIRE YOU TO USE SOME WASHERS AS SHIMS FROM YOUR LOCAL HARDWARE STORE TO RAISE THE MOUNTING POINT OF THE STRAP TO CLEAR THE SHOULDER OF THE CALIPER.*
*It is the buyer’s responsibility to research fitment of these straps on his or her application. Some newer bikes may require additional hardware or modifications to make work. If you are unsure then we advise you to search internet forums, chat rooms, visit your local drag strip etc. to find out for sure. The bike manufactures make small changes from year to year and it is practically impossible for us to keep up with all of them.
THIS AUCTION IS FOR A BLACK STRAP!!!!!
CLUB & GROUP DISCOUNTS ARE AVAILABLE JUST ASK.
THE MORE YOU BUY....THE MORE WE WILL DISCOUNT YOU!!!!
BUY FACTORY DIRECT AND CUT OUT THE MIDDLE MAN MARKUP.
VISIT MY EBAY STORE FOR ALL OUR STRAP LISTINGS!!!
IF YOU DON'T SEE YOUR BIKE LISTED, JUST EMAIL US WITH YOUR YEAR MAKE AND MODEL AND WE WILL HOOK YOU UP WITH THE BEST DEAL POSSIBLE.
BE SURE TO STOP BY OUR WEBSITE FOR MORE GREAT PRICES.
WWW.SPEED-NEEDS.COM
THANK YOU FOR LOOKING AND WE HOPE TO HAVE YOU AS ANOTHER SATISFIED CUSTOMER.
******BUY FACTORY DIRECT*****
MOTORCYCLE SUSPENSION LIMIT
FRONTEND LOWERING STRAP
DRAG RACER SPECIAL
FAST 1-3 DAY USPS PRIORITY MAIL INCLUDED!!!
(APPLIES TO U.S STATES ONLY, INTERNATIONAL IS JUST A FEW MORE DAYS)
NHRA IHRA MiROCK CMDRA WMDRA PMRA NHDRO AMRA ADRL AHDRA AMA PROSTAR IDBL DRAGBIKEAPPROVED!!!!
THESE STRAPS CAN REMAIN ON YOUR MOTORCYCLE WHEN DONE RACING. JUST A PUSH OF THE CAMBUCKLE LEVER AND YOUR BIKE WILL RETURN TO ITS NATURAL RIDE HEIGHT. NOW YOU CAN CRUISE AROUND WITHOUT DISRUPTING HANDLING OR STEERING. THEN WHEN THE TIME COMES, JUST A PUSH DOWN ON FRONT SUSPENSION WHILE PULLING THE STRAP HANDLE AND....BAM!! YOU ARE NOW ARMED AND READY TO TAKE CARE OF THAT LATE NIGHT "SITUATION" THAT NEEDS SOME ATTENTION.
THESE STRAPS ELIMINATE WHEELIES FOR LOWER 60' AND QUICKER E.T'S.
THEY WORK BY PRELOADING THE FRONT END TO PREVENT THE "HAMMER" EFFECT WHICH OCCURS WHEN LAUNCHING HARD.
STRAP SPECS:
1" PRESS RELEASE CAM BUCKLE
- PRE DRILLED BOLT PLATES AT THE ENDS4.5' OVERALL LENGTH6500LB. TEST NYLON WEBBING2180LB. RATED CAM-BUCKLE
DON'T SETTLE FOR SECOND BEST
PROUDLY MADE IN THE U.S.A!!!!!!!
20% STRONGER THAN ANY OTHER STRAP ON THE MARKET!
BUY THE BEST!!!
SUPER FAST INTERNATIONAL SHIPPER
SIMPLE UNIVERSAL INSTALL
JUST BOLT ONE END OF THE STRAP TO THE TOP LEFT FRONT BRAKE CALIPER BOLT. RUN THE STRAP UP AND OVER THE NECK OF THE FRAME (BETWEEN TOP OF GAS TANK AND TRIPLE TREE) AND DOWN TO THE TOP RIGHT CALIPER MOUNTING BOLT. COMPRESS THE FRONT SUSPENSION WHILE PULLING ON THE STRAP HANDLE(THIS WILL KEEP YOUR SUSPENSION COMPRESSED AND HELP KEEP YOUR FRONT END FROM COMING UP DURING HARD LAUNCHES). WHEN YOU ARE DONE RACING, SIMPLY PRESS THE LEVER ON THE CAM BUCKLE AND YOU WILL NOW BE BACK TO STOCK RIDE HEIGHT. NO NEED TO REMOVE THIS FROM THE BIKE COMPLETELY (UNLESS YOU WANT TO) THIS WAY IT IS ALWAYS THERE READY FOR ACTION.
*It is the buyer’s responsibility to research fitment of these straps on his or her application. Some newer bikes may require additional hardware or modifications to make work. If you are unsure then we advise you to search internet forums, chat rooms, visit your local drag strip etc. to find out for sure. The bike manufactures make small changes from year to year and it is practically impossible for us to keep up with all of them.
THIS AUCTION IS FOR A BLACK STRAP!!!!!