MG Sensor: 1/4" PC1030
Lens Angle: 170°
Image Resolution: PAL:712H x 486V/NTSC NTSC:704H x 576V
Minimum Illumination: 1.0V peak-to-peak
Lenses(focal length ): 2.4mm
Horizontal Resolution: 420TV Line
Output Standard: NTSC/PAL
S/N Ratio ≧45dB
Electronic Shutter: Electronic Rolling Shutter
Frame Rate: 60fps(@27MHzin NTSC) 50fps(@27MHzin PAL)
Image processing: Auto exposure, AWB, AGC, Auto Flicker detection and cancellation
Mirror Image: Left-right mirror
Illumination: 0.5 Lux
Power Supply: DC12V±10%
Current consumption: Max 100mA
IP Rating: IP66
Temperature: -30℃~+60℃,RH 95% Max
Exterior materials: ABS
How to install
1. Take out your stock license plate light at the back of your car.
2. Fix the camera to where the stock license plate light was.
3. Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power
4. Connect the power of the camera to your car reverse lights - red wire to positive and black wire to negative.
5. Connect the video cable of the camera to the extension cord.
6. Connect the extension cord to your car monitor.
7. You will see the images when your car is in reverse shift.