ALUMINUM BIG BLOCK CHEVY
DRAG RACE ENGINE
Hardcore
Horsepower, LLC has been making serious power for more than
two decades. We've built, dyno tested, and raced hundreds of
engine combination's and have devised some of the best recipes for
ultimate, reliable, power anywhere on the planet!
We're currently offering
professionally-built and dyno-tested/tuned big-block Chevy race engines
All
parts used to build these engines are the highest quality available
giving them the utmost in durability and continued power potential.
On
the outside we make each engine look as good as it runs (Former
test engine shown in photos). They're Dyno-tuned, certified and ready
to perform. If you're looking for the ultimate Big-Block Chevy race
engine for your vehicle, you need to call Hardcore
Horsepower, LLC!
This engine can also be equipped with a
custom-plumbed NOS Fogger N2O system for even more power!
Why buy a Hardcore Horsepower Drag Race Engine?
- All Hardcore Horsepower
engines are built one at a time by only one technician to ensure
perfection.
- We blueprint our
assemblies to within +/- .0002" or +/- .5 gram where
possible. Blueprint spec sheets are supplied with engine.
- We only use parts and
packages that we've tested and are sure will produce accurate and
repeatable power.
- We have thousands of
dyno runs to rely on for making the best power from every
combination.
- We have a
"no-compromise" Q&A inspection program. If the parts
are not absolutely perfect, we either make them perfect, or send
them back.
- All engines are dyno
tested/tuned in-house before delivery.
- We keep our business
small. It is privately American-owned, meaning we don't answer to
investors who're only interested in making money.
We're only interested in making POWER!!!
Bottom
line- Our motto has always been
"Do it once. Do it right. Or don't do it at
all!!!"
Note: Only the parts listed below are
included with this engine, unless noted otherwise.
CID: 525"
HP: 1,000+ N/A; 1,800+ w/
N2O
Compression ratio: 15:1+
RPM range: 4,500-8,000+ rpm
Fuel req'd: 114-120+ octane
race gas or Methanol
- BLOCK: ARIAS ALUMINUM 6
BOLT DEEP SKIRT
- CAM: COMP CAMS SOLID
ROLLER
- CAM DRIVE: JESEL DRY
BELT DRIVE
- CARB: DYNO-TUNED 4500
DOMINATOR
- CONNECTING RODS: LUNATI
4340 BILLET CONNECTING RODS
- CRANKSHAFT: LUNATI 4340
FORGED STEEL CRANKSHAFT, INTERNALLY BALANCED
- CYL HEAD: DART PRO1
CNC-PORTED ALUM w/ O-RINGS
- CYL HEAD GASKETS:
COPPER
- EXHAUST HEADERS: *NOT
INCLUDED AT THIS PRICE
- FASTENERS: 9/16"
MAIN STUDS, ½" HEAD STUDS
- FLYWHEEL/FLEXPLATE:
BILLET STEEL, DEGREED SFI-APPROVED
- FRONT-MOUNTED
ACCESSORIES: (A/C, ALTERNATOR, WATER PUMP, POWER STEERING, ETC.)
*NOT INCLUDED AT THIS PRICE
- FUEL PUMP/PLUMBING:
*NOT INCLUDED AT THIS PRICE
- HARMONIC DAMPER: ATI
SFI-APPROVED RACE DAMPER
- IGNITION SYSTEM: MSD
BILLET DISTRIBUTOR w/ CRANK TRIGGER
- INDUCTION SYSTEM:
FULLY-PORTED EDELBROCK SUPER VICTOR MANIFOLD
- LIFTERS: JESEL
"DOGBONE" SOLID ROLLER .905" DIA.
- N2O SYSTEM: WILSON
PRO-FLOW 300HP PLATE + 600HP FOGGER + TWO 10-LBS. EMPTY BOTTLES w/
6AN SUPPLY LINES/FITTINGS & PURGE SYSTEM
- N2O CONTROLS:
PROGRESSIVE N2O SYSTEM CONTROLLER IS INCLUDED
- OIL SYSTEM: 2-pc BILLET FAB PAN w/ 3-STAGE DRY
SUMP & VACUUM PUMP
- PISTONS: 2618 FORGED
ALUMINUM DOME PISTONS
- RINGS: TOTAL SEAL
FILE-FIT
- ROCKER ARMS: JESEL PRO
ALUMINUM SHAFT SYSTEM 1.8:1 RATIO
- VALVE COVERS: BILLET
FABRICATED SHEETMETAL w/ SCREW-IN FILL CAP
- VALVETRAIN: 7/16"
PUSHRODS, TRIPLE SPRINGS, TITANIUM RETAINERS
- VALVES: DEL-WEST
TITANIUM
We install and tune! Purchase this item and receive
in-house installation, initial set-up, and tuning at Hardcore
Horsepower, LLC!
TN residents add 9.25% sales tax.
Layaway plan available for all items priced
$2,000.00 and up
Terms: Minimum 20% down payment due at close of sale. The
remaining balance due will be divided into 6 or 12 equal payments. Each
subsequent payment will be due at the beginning of each month
thereafter until balance is paid in full. Item will be built and/or
ordered and shipped after full payment has been received. All Deposits and Layaway payments are non-refundable. Feel
free to contact us for any more info or to get started.
Engines
may take approximately 4-12+ weeks to build. Final payment due in full
immediately upon purchase, excluding engines purchased on Layaway plan.
Details
of full build and copies of all pertinent engine information will be
provided to buyer only. This item will include all parts listed above,
except where noted. Some products shown in photos may not be included.
Any/all products may be changed without notice.
Hardcore Horsepower, LLC Warranty:
Any
item used for racing is not covered by any warranty.
We offer Ground shipping to the 48
states. AK, HI, and P.R. shipping extra.
Feel free to call for more info or to
customize your kit accordingly.
International Shipping may be available for extra
cost. Please provide a complete shipping address for quote.
Photos shown are representational only.
Actual item may differ.
Hardcore Horsepower, LLC
Franklin, TN
615/595-0060
10am-6pm Monday thru Friday
USA Central Time
Check out all of
the other great deals available in our eBay Store!!!
We Make It Go Fast!!!
WARNING
Some
of the products sold in this store contain/may contain chemicals known
to the State of California to cause cancer, birth defects or other
reproductive harm.
California
Health and Safety Code Section 25249.6
|