2009-2015 BMW 7 Series Alpina Style Rear Trunk Lip Spoiler (UNPAINTED)

Fits 2009-2015 BMW 7-Series (F01/F02)
(All Models)

Details:

• This is a Alpina Style Rear Trunk Lip Spoiler
• Spoiler is available Unpainted - Primer Applied
• Made of FRP composite Material (Fiberglass) Handmade
• Spoiler is Light weight and will not interfere with the raising or lowering of trunk lid
• Automotive Double-Sided tape is pre-applied to underside of spoiler
• Spoiler goes through quality control inspection before it's shipped

Unpainted Option Details:

• High Quality 2K High-build Primer is applied to spoiler 
• Spoiler is free of any major defects but still needs to be prepped before painting
• Automotive Double-Sided tape is pre-applied to underside of spoiler
• Spoiler will be packaged Unpainted and usually ships within 1-3 business days

Installation Instructions:
No Drilling Needed
Step 1. Clean Surface Clean surface area where spoiler will be applied with Isopropyl Alcohol "Rubbing Alcohol". All wax and residue must be removed before you can install spoiler.		Step 2. Test Fit and Align Place the spoiler on the trunk and align. Then place a 2-inch piece of masking tape every 5-7 inches outlining the spoiler position to be used as a reference. By doing this you are creating a working template and insuring correct alignment.
Step 3. Peal Backing Then remove the red plastic from the double-sided tape and lay the spoiler in place using your masking tape reference. "Avoid touching the exposed tape" Note: We recommend using an adhesive silicone in strategic locations in conjunction with the Double-Sided tape for best results		Step 4. Installation Gently press spoiler into place on the deck lid. Once satisfied with placement, firmly press down on spoiler to ensure adhesion along entire vehicle surface. Continue to apply pressure until satisfied. "We Do Not Wash Car for 24 Hours"