Product Description
Description: 1.The temperature gauge can be installed to masure either water
or oil temperature.It can alert you,usually before the dash warning light
would, to a problem that may cause a break down that would result in costly
repair. 2.A higher than normal water temperature reading indicates a low
coolant level,loose or missing fan and /or water pump belt, a plugged or
leaking radiator, a wom water pump , or incorrect ignition timing. A lower
than normal water temperature reading indicates a defective thermostat. How to
connect: Red wire lead for + volt supply to internal lamp; Black wire to
system ground S Threaded terminal for connecting sensor wire + Threaded
terminal for connecting + volt supply - Threaded terminal for connecting
system ground Pls remember that the sensor is automatically connected to
system ground when installed. If installing where the body of the sensor is
not tied to system ground, it will be necessary to hook up a ground to the
body of the sensor element. Note: 1.All you will need is 18 gauge stranded
wire to make the necessary connections. 2.Hole diameter is 2 inch. 3.Meter OD
is 2 3/16 inch. 4.Meter depth from front of panel to the end of the mounting
studs is 2 inch. Package Included: 1 x Water Temperature Gauge 1 x Mounting
Screw 1 x Manual