Aluminum Radiator Hose Swivel Neck Thermostat Housing for Honda K-Series K20 K24 

    Specifications:

     Package Include:

  • 1x Swivel Thermostat Housing
  • 1x -16AN Hose Adapter
  • 3x Bolts
     Fitment:
  • Fit For K Series K20 K20a K20a2 K20z1 K24A K24Z  

     Features:

  • Unique steel template is included which greatly improves cut out accuracy.
  • The housing swivels, allowing you to position the water outlet angle before it is tightened down. The provided custom made fitting is the same size as the oem rad hose on one end, and is threaded for an AN fitting on the other end.
  • This allows you to use whatever size fitting you need for custom installations. If you want to use braided hose with AN fittings, this housing will bolt on easily and with the right adapter threaded in, you’ll be all set. The housing has three ports in the body, one for your fan switch, a 1/8 NPT port for gauges etc. and also.
  • NPT port for our optional recirculation fitting. 2 NPT plugs are included in case the ports remain unused. The swivel neck comes pre-assembled with a quality Stant thermostat (180 deg.) which is held in place with a 'C' clip. The kit uses a standard size thermostat that you can easily replace with anything in the 160-195 degree range.
  • Last but not least, this was a bonus we found while designing it. We noticed that by adding one more hole to the flange you could completely remove the oem black plastic housing from the block and remove the heater core hoses. When set up this way, our thermostat housing is bolted directly to the oem aluminum water pump housing. This is perfect for race car applications.

    Notes: