•  
  •  
  • Product Description:
  •  
  •  
  • In use and daily maintenance, we should pay attention to the following points to extend the service life of the steering machine:
  •  1. When driving on the potholed and uneven road, slow down and reduce the load borne by the steering gear.

    • For Hydraulic Steering Rack and Pinion HONDA ACCORD 1998 HONDA ACCORD 1998-2002

    https://www.aa1car.com/library/steering_rack_cutaway.gif

     

     

    Product Description:

     

     

    In use and daily maintenance, we should pay attention to the following points to extend the service life of the steering machine:


    1. When driving on the potholed and uneven road, slow down and reduce the load borne by the steering gear.


    2. Frequently check the protective sleeves on both sides of the steering machine and the protective sleeves on the upper part of the steering machine connected with the universal cross. The damage of the sheath is the main factor that causes the early wear and damage of the steering gear. After the sheath is damaged, water and dust and sand will enter the steering gear through the damaged part, damaging the lubricating grease film of the gear rack, resulting in rust, abnormal wear and other phenomena inside the steering gear. If the internal water and sand are not disposed of immediately, the steering gear will be scrapped in a short time. Therefore, check the status of the dust-proof sheath at least once a month. If the sheath is damaged, it must be replaced immediately, and the steering machine shall be comprehensively inspected and maintained before replacement.


    3. After the toe in is adjusted by four-wheel positioning and the steering rod is changed, pay special attention to the deformation and improper assembly of the protective sleeve, otherwise the protective sleeve will be damaged.


    4. The lubricating grease will gradually become dirty and deteriorated during use, which will reduce the lubricating capacity; meanwhile, the materials under wear will gradually increase, and the wear phenomenon of abrasive particles will become more and more serious, which will aggravate the wear of steering gear. Every 100000 km or so, the steering gear shall be fully maintained, cleaned and re greased.


    5. Due to the poor service conditions and heavy load, the steering gear must be equipped with special lubricating grease, which can not meet the use requirements.


    6. The middle clearance of the steering wheel will gradually increase in use. If the left and right empty stroke of the steering wheel exceeds 15 degrees, the steering wheel must be inspected. If the abnormal wear of the gear rack is serious, the steering wheel assembly must be replaced. If there is no abnormal wear, but the clearance is too large, it can be adjusted. During the adjustment, it shall be carried out by trained professionals at the service station. After the adjustment, it shall be ensured that the steering wheel can be turned left and right to the limit position, with even force and flexible rotation.


    7. Do not carry out the maintenance and repair of the steering machine at the roadside shop with simple equipment and low technical level. If the steering machine is not adjusted properly, it will cause jamming and endanger the driving and personal safety.

    el. If the steering machine is not adjusted properly, it will cause jamming and endanger the driving and personal safety.

     

    Compatible with the following vehicles:

     

      2002 Honda Accord EX Coupe 2-Door 3.0L 2997CC V6 GAS SOHC Naturally Aspirated
      2002 Honda Accord EX Sedan 4-Door 3.0L 2997CC V6 GAS OHV Naturally Aspirated
      2002 Honda Accord EX Sedan 4-Door 3.0L 2997CC V6 GAS SOHC Naturally Aspirated
      2002 Honda Accord LX Coupe 2-Door 3.0L 2997CC V6 GAS SOHC Naturally Aspirated
      2002 Honda Accord LX Sedan 4-Door 3.0L 2997CC V6 GAS SOHC Naturally Aspirated
      2001 Honda Accord EX Coupe 2-Door 3.0L 2997CC V6 GAS SOHC Naturally Aspirated
      2001 Honda Accord EX Sedan 4-Door 3.0L 2997CC V6 GAS OHV Naturally Aspirated
      2001 Honda Accord EX Sedan 4-Door 3.0L 2997CC V6 GAS SOHC Naturally Aspirated
      2001 Honda Accord LX Coupe 2-Door 3.0L 2997CC V6 GAS SOHC Naturally Aspirated
      2001 Honda Accord LX Sedan 4-Door 3.0L 2997CC V6 GAS SOHC Naturally Aspirated
      2000 Honda Accord Coupe Coupe 2-Door 3.0L 2997CC V6 GAS OHV Naturally Aspirated
      2000 Honda Accord Coupe Coupe 2-Door 3.0L 2997CC V6 GAS SOHC Naturally Aspirated
      2000 Honda Accord EX Coupe 2-Door 3.0L 2997CC V6 GAS SOHC Naturally Aspirated
      2000 Honda Accord EX Sedan 4-Door 3.0L 2997CC V6 GAS OHV Naturally Aspirated
      2000 Honda Accord EX Sedan 4-Door 3.0L 2997CC V6 GAS SOHC Naturally Aspirated
      2000 Honda Accord LX Coupe 2-Door 3.0L 2997CC V6 GAS SOHC Naturally Aspirated
      2000 Honda Accord LX Sedan 4-Door 3.0L 2997CC V6 GAS SOHC Naturally Aspirated
      1999 Honda Accord Coupe Coupe 2-Door 3.0L 2997CC V6 GAS OHV Naturally Aspirated
      1999 Honda Accord Coupe Coupe 2-Door 3.0L 2997CC V6 GAS SOHC Naturally Aspirated
      1999 Honda Accord EX Coupe 2-Door 3.0L 2997CC V6 GAS SOHC Naturally Aspirated

     


    Item Specifics
    Brand usdiyparts
    Manufacturer Part Number US16549601P
    Part Type Rack & Pinion Complete Unit,Steering Rack,Steering Gear
    Performance Part Yes
    Installation method Performance/Custom
    Transmission Type Automatic
    Material High Quality Steel
    Surface Finish Polished, Rust Protected
    Manufacturer Warranty 3 Years
    Vintage Car Part Yes
    Fitment Type Direct Replacement
    Rack Type Hydraulic
    Greasable or Sealed YES
    Other Part Number Steering gear
    Rack Material corrosion and rust prevention
    Note Backed by satisfying after-sales service
    Advantage Rotate quickly and normal position
    Interchange Part Number 26-1791,Rack 25521,29021133,19320604
    Superseded Part Number 53601S84A02,53010S87A01
    OE/OEM Part Number rack replacement kit,rack and pinion,power rack parts
    OE Number Power Steering Rack,Steering Rack and Pinion
    Sub Type Rack and Pinion Assembly, Rack and Pinion Rack Gear
    Package Dust plug
    Universal Fitment No
    Itment Note Top performance For long service life
    Mounting Hardware Included As the picture
    Fits HONDA
    For HONDA ACCORD 1998-2002

    Shipping

    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

    1. Package handling takes about 1 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.

    We use USPS or Fedex Smartpost or UPS and so on.
    International Buyers Please Note:
    a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
    b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying.

    Payment

    1.PayPal will allow you to pay by credit card, debit card, Log in PayPal for details.

    • 2.We will only ship to the confirmed Paypal shipping address given with the payment.

     

    Returns
    • 1.We offer a 30 day 100% money back guarantee.
    • 2.Original shipping charges are non-refundable.
    • 3.Buyer pays return shipping.
    Contact Us

    1. We will leave positive feedback once we get your payment. 
    2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
    3. If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR

    For Hydraulic Steering Rack and Pinion HONDA ACCORD 1998 HONDA ACCORD 1998-2002

    https://www.aa1car.com/library/steering_rack_cutaway.gif

     

     

    Product Description:

     

     

    In use and daily maintenance, we should pay attention to the following points to extend the service life of the steering machine:


    1. When driving on the potholed and uneven road, slow down and reduce the load borne by the steering gear.


    2. Frequently check the protective sleeves on both sides of the steering machine and the protective sleeves on the upper part of the steering machine connected with the universal cross. The damage of the sheath is the main factor that causes the early wear and damage of the steering gear. After the sheath is damaged, water and dust and sand will enter the steering gear through the damaged part, damaging the lubricating grease film of the gear rack, resulting in rust, abnormal wear and other phenomena inside the steering gear. If the internal water and sand are not disposed of immediately, the steering gear will be scrapped in a short time. Therefore, check the status of the dust-proof sheath at least once a month. If the sheath is damaged, it must be replaced immediately, and the steering machine shall be comprehensively inspected and maintained before replacement.


    3. After the toe in is adjusted by four-wheel positioning and the steering rod is changed, pay special attention to the deformation and improper assembly of the protective sleeve, otherwise the protective sleeve will be damaged.


    4. The lubricating grease will gradually become dirty and deteriorated during use, which will reduce the lubricating capacity; meanwhile, the materials under wear will gradually increase, and the wear phenomenon of abrasive particles will become more and more serious, which will aggravate the wear of steering gear. Every 100000 km or so, the steering gear shall be fully maintained, cleaned and re greased.


    5. Due to the poor service conditions and heavy load, the steering gear must be equipped with special lubricating grease, which can not meet the use requirements.


    6. The middle clearance of the steering wheel will gradually increase in use. If the left and right empty stroke of the steering wheel exceeds 15 degrees, the steering wheel must be inspected. If the abnormal wear of the gear rack is serious, the steering wheel assembly must be replaced. If there is no abnormal wear, but the clearance is too large, it can be adjusted. During the adjustment, it shall be carried out by trained professionals at the service station. After the adjustment, it shall be ensured that the steering wheel can be turned left and right to the limit position, with even force and flexible rotation.


    7. Do not carry out the maintenance and repair of the steering machine at the roadside shop with simple equipment and low technical level. If the steering machine is not adjusted properly, it will cause jamming and endanger the driving and personal safety.

    el. If the steering machine is not adjusted properly, it will cause jamming and endanger the driving and personal safety.

     

    Compatible with the following vehicles:

     

      2002 Honda Accord EX Coupe 2-Door 3.0L 2997CC V6 GAS SOHC Naturally Aspirated
      2002 Honda Accord EX Sedan 4-Door 3.0L 2997CC V6 GAS OHV Naturally Aspirated
      2002 Honda Accord EX Sedan 4-Door 3.0L 2997CC V6 GAS SOHC Naturally Aspirated
      2002 Honda Accord LX Coupe 2-Door 3.0L 2997CC V6 GAS SOHC Naturally Aspirated
      2002 Honda Accord LX Sedan 4-Door 3.0L 2997CC V6 GAS SOHC Naturally Aspirated
      2001 Honda Accord EX Coupe 2-Door 3.0L 2997CC V6 GAS SOHC Naturally Aspirated
      2001 Honda Accord EX Sedan 4-Door 3.0L 2997CC V6 GAS OHV Naturally Aspirated
      2001 Honda Accord EX Sedan 4-Door 3.0L 2997CC V6 GAS SOHC Naturally Aspirated
      2001 Honda Accord LX Coupe 2-Door 3.0L 2997CC V6 GAS SOHC Naturally Aspirated
      2001 Honda Accord LX Sedan 4-Door 3.0L 2997CC V6 GAS SOHC Naturally Aspirated
      2000 Honda Accord Coupe Coupe 2-Door 3.0L 2997CC V6 GAS OHV Naturally Aspirated
      2000 Honda Accord Coupe Coupe 2-Door 3.0L 2997CC V6 GAS SOHC Naturally Aspirated
      2000 Honda Accord EX Coupe 2-Door 3.0L 2997CC V6 GAS SOHC Naturally Aspirated
      2000 Honda Accord EX Sedan 4-Door 3.0L 2997CC V6 GAS OHV Naturally Aspirated
      2000 Honda Accord EX Sedan 4-Door 3.0L 2997CC V6 GAS SOHC Naturally Aspirated
      2000 Honda Accord LX Coupe 2-Door 3.0L 2997CC V6 GAS SOHC Naturally Aspirated
      2000 Honda Accord LX Sedan 4-Door 3.0L 2997CC V6 GAS SOHC Naturally Aspirated
      1999 Honda Accord Coupe Coupe 2-Door 3.0L 2997CC V6 GAS OHV Naturally Aspirated
      1999 Honda Accord Coupe Coupe 2-Door 3.0L 2997CC V6 GAS SOHC Naturally Aspirated
      1999 Honda Accord EX Coupe 2-Door 3.0L 2997CC V6 GAS SOHC Naturally Aspirated

     



    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

    1. Package handling takes about 1 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.

    We use USPS or Fedex Smartpost or UPS and so on.
    International Buyers Please Note:
    a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
    b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying.

    1.PayPal will allow you to pay by credit card, debit card, Log in PayPal for details.

    • 2.We will only ship to the confirmed Paypal shipping address given with the payment.

     

    • 1.We offer a 30 day 100% money back guarantee.
    • 2.Original shipping charges are non-refundable.
    • 3.Buyer pays return shipping.

    1. We will leave positive feedback once we get your payment. 
    2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
    3. If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR


    Copyright of am-motors2020. All rights reserved.