HANGKAI 12 HP 2 Stroke Outboard Motor Boat Engine w/ Water Cooled CDI Long Shaft
Description

With a Huge Thrust, a Sturdy and Powerful Propeller, and Precise Speed Control, the Outboard Engine Is a Good Helper for Your Water Work. Its Two-stroke Motor, Flexible Steering, Easy Operation Let You Sneak up on Fish, Outdoor Adventure, Etc. with the Best Speed and Low Noise.

Specification

Material: Aluminum Alloy

Color: Black

Model: 12hp Horsepower Long Axis

Displacement: 169cc

Gear Ratio: 2.08 (27:13)

Number of Cylinders: 2

Speed: 4500-5500rpm

Gear: F-n-r

Refueling Method: 92 Unleaded Gasoline Is Recommended

Maximum Power: 8.8kw

Oil Tank Capacity: 24l/6.34gal

Endurance: 5-6h

Max. Load-bearing Capacity: 1000kg/2204lbs

Ignition System: Cdi

Cooling System: Water Cooling

Control System: Tiller Control

Start System: Manual Start

Suitable Stern Plate Height: 45cm-55cm/17.7*21.7in

Propeller Specification: 23.5cm/9.25in (Length) * 20.3cm/8in (Diameter)

Cylinder Diameter * Stroke: 50mm/2in * 43mm/1.7in

Recommended Engine Oil: 2 Stroke Engine Oil

Mixing Ratio: Fuel: Oil = 50:1

Trim and Tilt System: Manual Tilt

Net Weight: 32kg/70.5lbs

Gross Weight: 34kg/75lbs

Package Size: 70.5*37.5*120cm/27.8*14.8*47.2in

Product Size: 87.3*33.2*104cm/34.4*13.1*40.9in

Package Included

1x Outboard Motor

1x Flameout Rope

1x Oil Pipe

1x Sealing Ring

1x Paper Pad

1x Spark Plug

1x Start Rope

1x Water Pump Impeller

1x Cotter Pin

1x Fuel Tank

1x English Manual

Other Toolsℵ

Features

  • Strong Power: 2-Stroke 12hp Engine (4500 to 5500rpm) and 8.8kw Max. Power Provide Strong Power for You to Drive Fast and save a Lot of Time and Energy.
  • Excellent Load-bearing Capacity: with Solid Aluminum Alloy Material and a Powerful Engine, the Outboard Engine Has a Maximum Load of 2204 Pounds to Meet Different Needs. (the Heavier the Load, the Slower the Speed)
  • Excellent Endurance: Low Fuel Consumption, Efficient Two-stroke Motor, and Large Capacity Fuel Tank (6.34 Gallons) Provide You with 5-6 Hours of Endurance to Meet the Needs of Short/Long Distance Travel.
  • Excellent Heat Dissipation: Many Cooling Holes and Water Cooling Systems Provide Excellent Heat Dissipation to Prevent the Engine from Burning out After a Long Time of Use.
  • Flexible Steering: Forward, Neutral and Reverse Gears, and a 360-Degree Steering Function Allow You to Flexibly Control the Direction of the Ship.
  • Easy Speed Regulation: Stepless Speed Change and Constant Speed Cruise Function Make It Easy for You to Adjust the Running Speed and Stable Navigation at a Constant Speed to Bring You a More Comfortable User Experience

Details

  • Three-blade Propeller: the Three-blades Propeller with a Streamlined Design Provides You with Greater Power.
  • Silencer Cover: the Silencer Cover Can Absorb the Noise Generated by the Fan Through the Internal Sound-absorbing Material, Thus Providing a Quieter Working Environment.
  • Anti-swirl Plate: the Anti-swirl Plate Can Effectively Reduce the Turbulence of the Waves and Avoid Water-wetting Clothes.

Gear Oil Filling Method

There Is a Screw on the Gearbox, Unscrew the Screw to Add Gear Oil. Each Machine Will Be Filled with Gear Oil Before Leaving the Factory, so It Does Not Need to Be Refilled When It Is Used for the First Time. After That, Add According to Personal Use, and Check Every Ten Hours.

Application

This Outboard Motor Is Suitable for Small Ships with Different Materials(Width less than 4.9 Feet and Length less than 19.7 Inches), Such As Inflatable Boats, Iron Boats, Plastic Boats, Fiberglass Boats, and Wooden Boats. It Is Widely Used in Fishery, Aquaculture, Outdoor Exploration, Etc.

Notes

1. the Two-stroke Outboard Must Use a Mixture of No. 92 Gasoline and Two-stroke Engine Oil.

2. the Volume Ratio of Gasoline and Oil During the Running-in Period of the New Machine Is 25:1.

3. After the Running-in Period, the Volume Ratio of Gasoline and Oil Is 50:1.

4. Special Attention: Gasoline and Engine Oil Must Be Pre-mixed and Stirred Evenly, and Then Poured into the Fuel Tank.

5. the Outboard Motor Must Be Started in Water, Do Not Start the Engine on Shore.

6. Loosen the Vent Screw on the Fuel Tank Cover Counterclockwise When Starting.

7. When the Outboard Motor Is Started, the Emergency Flameout Rope Should Be Inserted, and the Other End Should Be Placed on the Wrist or Belt.

8. the Running-in Period Is About 10 Hours or a Month, and During the Running-in Period, Do Not Drive with a High Accelerator.

9. Replace the Gear Oil After the Running-in Period, and the Second Replacement Time Is After 100 Hours or About Six Months.

10. Please Allow the Slight Color Difference Caused by the Shooting Light and 1-3cm Error Due to Manual Measurement. Please Make Sure You Do Not Mind Before You Order.

note:Our machines are all without gear oil versions. Please add gear oil to the gears before using the motor and replace gear oil after the run-in period. (If you do not  know how to handle this, please contact us).  Our outboard motor doesn't with oil of gear,  please prepare it by yourself.
note:Our machines are all without gear oil versions. Please add gear oil to the gears before using the motor and replace gear oil after the run-in period. (If you do not  know how to handle this, please contact us).  Our outboard motor doesn't with oil of gear,  please prepare it by yourself.
note:Our machines are all without gear oil versions. Please add gear oil to the gears before using the motor and replace gear oil after the run-in period. (If you do not know how to handle this, please contact us). Our outboard motor doesn't with oil of gear, please prepare it by yourself.
 
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Shipping:
 
2-9 working days to: USA
 
    •  
    • We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
 
  •  
Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
PushAuction

DataCaciques