Moser's Custom built 9" FORD Center Sections are completly assembled and shipped in a specially designed plastic case. Solid Pinion Shims are used instead of the weaker crush sleeves. All units are assembled with special calibrated "Torque Guns", which means no impact guns that will hammer and flat spot bearings and no guessing on your pinion nut torque setting! Each pinion is specifically torqued to the gear manufactures stated setting.
All Center Sections are assembled with the following Moser Engineering designed and manufactured in the USA components;
Cases
Pinion Supports
Pinion Yokes
Spools
Items that are part of the Center Section that are assembled but sourced from an outside supplier which may or may not be made is the USA;
Bearings & Seals
Fasteners (all grade 8)
Limited Slip Differentials
Ring & Pinions (Gears) - Moser Engineering does not manufacture any gears! These are sourced but not limited to the following suppliers; US Gear, Hoosier Gear, Motive/Richmond Gear & Yukon Gear
**Light Weight Aluminum Spools and Pinion Yokes are designed to be used in light weight racing applications (<2000 lbs.) only! These items also are considered wear items and should be monitored and replaced periodically.
DIFFERENTIAL:
Steel Spool (28,31,33,35 & 40 spline) MADE IN THE USA! (SEE NOTE IN QUICK OVERVIEW)
Auburn Grip-N-Lock (28 or 31 spline only) (Add $442.00)
Trac-Loc (28 or 31 spline only) (Add $252.00)
Detroit Locker (28,31 or 35 spline only) (Add $577.00)
Truetrac (28 & 31 spline only) Lucas Mineral based oil w/No additives recommended! (Add $412.00)
Truetrac (35 Spline) Lucas Mineral based oil w/No additives recommended! (Add $472.00)
Wavetrac (31 spline only) MADE IN THE USA! (AMSOIL AMS-FGRQT RECOMMENDED FLUID!) (Add $552.00)
Wavetrac (33 spline only) MADE IN THE USA! (AMSOIL AMS-FGRQT RECOMMENDED FLUID!) (Add $552.00)
Wavetrac (35 spline only) MADE IN THE USA! (AMSOIL AMS-FGRQT RECOMMENDED FLUID!) (Add $552.00)
Aluminum Spool (35 spline only) (Designed for lightweight racing applications <2000 lbs.) (Add $327.00)
Aluminum Spool (40 Spline only) (Must Select 3.812 Aluminum Case) (For lightweight racing apps <2000lbs.) (Add $358.00)
Pro Steel 40 Spline Spool (*3.812 Aluminum Case Only!) (Add $147.00)
SPLINE COUNT:
28 Spline
31 Spline
33 Spline
35 Spline
40 Spline
PINION YOKE:
1350 Series Chrome Moly Pinion Yoke
1310 Series Chrome Moly Pinion Yoke
1350 Series Aluminum (Designed for lightweight racing applications <2000 lbs.) (Add $133.00)
Pinion Coupler 20/28 (28 Spline Pinion) (Add $65.00)
Pinion Coupler 20/35 (35 Spline Pinion) (Add $65.00)
PINION SUPPORT:
Nodular Iron Daytona Pro/Street (FOR USE W/NODULAR IRON CASES!)
Aluminum Daytona Pro/Street (Add $20.00)
10 - Hole Aluminum Daytona Pro/Street (Add $94.00)
Aluminum Pro (For Large Pinion Competition Gears Only) (Add $69.00)
10 - Hole Aluminum Pro Support (For Large Pinion Competition Gears Only) (Add $169.00)
GEAR SELECTION:
3.00 Ratio Pro Street *US GEAR
3.25 Ratio Pro Street *US GEAR
3.50 Ratio Pro Street *US GEAR
3.70 Ratio Pro Street *US GEAR
3.89 Ratio Pro Street *US GEAR
4.11 Ratio Pro Street *US GEAR
4.30 Ratio Pro Street *MOTIVE GEAR
4.57 Ratio Pro Street *US GEAR
4.63 Ratio Pro Street *US GEAR
4.71 Ratio Pro Street **Richmond Gear
4.78 Ratio Pro Street *US GEAR
4.86 Ratio Pro Street *US GEAR
5.00 Ratio Pro Street *US GEAR
5.14 Ratio Pro Street *MOTIVE GEAR
5.29 Ratio Pro Street *MOTIVE
5.38 Ratio Pro Street *US GEAR
5.43 Ratio Pro Street *US GEAR
5.67 Ratio Pro Street *US GEAR
5.83 Ratio Pro Street *MOTIVE GEAR
6.00 Ratio Pro Street *MOTIVE GEAR
6.20 Ratio Pro Street *MOTIVE GEAR
6.33 Ratio Pro Street *MOTIVE GEAR
6.50 Ratio Pro Street *MOTIVE GEAR
7.00 Ratio Pro Street *RICHMOND GEAR (Add $65.00)
3.40 Ratio Pro/Comp *RICHMOND GEAR (LARGE PINION - DRAG RACING ONLY) *NOT APPLICABLE WITH LOAD BOLT ASSEMBLY! **OUT OF STOCK! (Add $305.00)
3.50 Ratio Pro/Comp (OUT OF STOCK) *RICHMOND GEAR (LARGE PINION - DRAG RACING ONLY) *NOT APPLICABLE WITH LOAD BOLT ASSEMBLY! **OUT OF STOCK! (Add $305.00)
3.60 Ratio Pro/Comp *RICHMOND GEAR (LARGE PINION - DRAG RACING ONLY) *NOT APPLICABLE WITH LOAD BOLT ASSEMBLY! *OUT OF STOCK* (Add $305.00)
3.70 Ratio Pro/Comp *RICHMOND GEAR (LARGE PINION - DRAG RACING ONLY) *NOT APPLICABLE WITH LOAD BOLT ASSEMBLY!**OUT OF STOCK!* (Add $305.00)
3.89 Ratio Pro/Comp *US GEAR (LARGE PINION - DRAG RACING ONLY) (Add $305.00)
4.11 Ratio Pro/Comp *US GEAR (LARGE PINION - DRAG RACING ONLY) (Add $260.00)
4.29 Ratio Pro/Comp *US GEAR (LARGE PINION - DRAG RACING ONLY) (Add $260.00)
4.57 Ratio Pro/Comp *US GEAR (LARGE PINION - DRAG RACING ONLY) (Add $260.00)
4.86 Ratio Pro/Comp *US GEAR (LARGE PINION - DRAG RACING ONLY) (Add $260.00)
4.86 Ratio Pro/Comp *RICHMOND GEAR (Small Pinion) (DRAG RACING ONLY) (Add $200.00)
5.00 Ratio Pro/Comp *RICHMOND GEAR (Small Pinion) (DRAG RACING ONLY) (Add $200.00)
5.14 Ratio Pro/Comp *RICHMOND GEAR (Small Pinion) (DRAG RACING ONLY) (Add $200.00)
5.29 Ratio Pro/Comp *RICHMOND GEAR (Small Pinion) (DRAG RACING ONLY) (Add $200.00)
5.43 Ratio Pro/Comp *RICHMOND GEAR (Small Pinion) (DRAG RACING ONLY) (Add $200.00)
5.67 Ratio Pro/Comp *RICHMOND GEAR (Small Pinion) (DRAG RACING ONLY) (Add $200.00)
5.83 Ratio Pro/Comp *RICHMOND GEAR (Small Pinion) (DRAG RACING ONLY) (Add $200.00)
6.00 Ratio Pro/Comp *RICHMOND GEAR (Small Pinion) (DRAG RACING ONLY) (Add $200.00)
6.20 Ratio Pro/Comp *RICHMOND GEAR (Small Pinion) (DRAG RACING ONLY) (Add $200.00)
6.50 Ratio Pro/Comp *RICHMOND GEAR (Small Pinion) (DRAG RACING ONLY) (Add $200.00)
ADDITIONAL OPTIONS::
3-Channel ABS Ring (For: 1993-2002 GM F-Body Cars Only) (Must have Modified Housing to be Applicable (Add $114.00)
Load Bolt Assembly #83416668 (For use with Aluminum Case & Spool Only!) CANNOT BE USED IN CONJUNCTION WITH RICHMOND/MOTIVE RING GEAR! (Add $60.00)
POWDER COAT (CASE ONLY):
NO POWDERCOAT
Flat Black (Add $85.00)
Semi-Gloss Black (Add $85.00)
Gloss Black (Add $85.00)
Mirror Red (Add $110.00)
1-Coat Silver (Add $110.00)
Speedway Black (Add $110.00)
Speedway Gray (Add $110.00)
Chevy Orange (Add $110.00)
MOSER - Red (Add $125.00)
Silver Sparkle (Black Base Coat w/Silver Metallic Flake) (Add $125.00)
POWDER COAT (PINION SUPPORT ONLY):
NO POWDERCOAT
Flat Black (Add $35.00)
Semi-Gloss Black (Add $35.00)
Gloss Black (Add $35.00)
Mirror Red (Add $40.00)
1-Coat Silver (Add $40.00)
Speedway Black (Add $40.00)
Speedway Gray (Add $40.00)
Chevy Orange (Add $40.00)
MOSER - Red (Add $50.00)
Silver Sparkle (Black Base Coat w/Silver Metallic Flake) (Add $50.00)
UPS HANDLING FEE - HEAVY WEIGHT PACKAGE CHARGE:
ADDITIONAL HANDLING WEIGHT (Add $27.00)
Quantity
Contact me for your selections
Five zero two - three one four - three nine eight four
All parts manufactured by Moser Engineering