Gearbox Kit 30 Series
Material: Metal
Shaft Size: 5/8" with 3/16" keyway
Shaft size: for driven clutch is 5/8'' with 3/16'' keyway
Forward Ratio: 1:1:3
Reverse Ratio: 1:2:6
Gearbox Speed: 5/13 of the Clutch speed
Shifter Cable Length: 1540mm ( 5' ) ( 60'' )
3 shift models:forward,reverse, neutral
For Go-Karts, Utility Vehicles and other Application with Engines up to 11HP
with 12T #35 chain and 10T #40/ 41/ 420 Chain
1 X Forward/Reverse Gearbox with 3/16" Keyway
2 X Mounting Plates
1 X Shifter Disc
2 X Shifter Cable
1 X 10T and 12T Sprocket
1 X Shifter Assembly
1) Remove existing clutch and driven pully from Kart. Cut rear protector bar off
2) Remove spacer ring from driven pully housing (silver, drivers side). Place on drive shaft next to existing brass spacer bushing
3) use two angle iron. Drill hole for 8mm bolt towards back top of each (for mounting of transmission).
4) Align drive sprocket with trans sprocket. Tack into place
5) Attached upper adjustment saddle (the gold "U" with a threaded rod sticking out.
6) Place a sleeve over this rod and, one aligned, weld to the top of the sleeve that previously held the driven pully shaft removed in step 1
7) Confirm chain length with new section of roller chain. Adjust tack positions as required for adequate fit
8) Weld everything in place.
9) Use belt, and attach chain/pullies/belt
10) Use some sort of "L" bracket to secure shifter in appropriate position, being sure to attach cables to it before install
11) run cables back to trans, attach, make final adjustments.
12) (optional) weld rear protector bar back on as you please. This makes lifting the rear of the kart so much easier.
We only ship the item to PayPal verified shipping address. Please make sure your shipping address is the same as PayPal, no changes are allowed once the order is shipped.
All USA location orders will be shipped out via USPS or UPS or Fedex with a tracking number. We do not ship to P.O. Boxes, APO/FPO or Military Mail Box.
We do not cover any import Duty and Tax. Customer should be responsible for the Import tax. Contact us , we will try our best to help minimize it.
HK/TW buyer please notice us your government ID #.
BRA,AR,PER buyer leave us your CPF#,CUIT#,RUC# correspondingly.
We accept Paypal only for the payment thru ebay, please do not pay directly to our Paypal account.
Paypal allows to pay by Credit Card, Direct Debit, VISA, eCheck, or other methods, please kindly check Paypal for more information.
For multiple purchases, please add items to your Ebay shopping cart and pay once for entire order.
Please kindly contact us before return, our representatives will send you detail return instruction.
The guarantee will be only for the cost of the item, we will not responsible for installation or other fees like labor expenses, towing expenses, additional repair expenses or other related expenses.
Gearbox Kit 30 Series
Material: Metal
Shaft Size: 5/8" with 3/16" keyway
Shaft size: for driven clutch is 5/8'' with 3/16'' keyway
Forward Ratio: 1:1:3
Reverse Ratio: 1:2:6
Gearbox Speed: 5/13 of the Clutch speed
Shifter Cable Length: 1540mm ( 5' ) ( 60'' )
3 shift models:forward,reverse, neutral
For Go-Karts, Utility Vehicles and other Application with Engines up to 11HP
with 12T #35 chain and 10T #40/ 41/ 420 Chain
1 X Forward/Reverse Gearbox with 3/16" Keyway
2 X Mounting Plates
1 X Shifter Disc
2 X Shifter Cable
1 X 10T and 12T Sprocket
1 X Shifter Assembly
1) Remove existing clutch and driven pully from Kart. Cut rear protector bar off
2) Remove spacer ring from driven pully housing (silver, drivers side). Place on drive shaft next to existing brass spacer bushing
3) use two angle iron. Drill hole for 8mm bolt towards back top of each (for mounting of transmission).
4) Align drive sprocket with trans sprocket. Tack into place
5) Attached upper adjustment saddle (the gold "U" with a threaded rod sticking out.
6) Place a sleeve over this rod and, one aligned, weld to the top of the sleeve that previously held the driven pully shaft removed in step 1
7) Confirm chain length with new section of roller chain. Adjust tack positions as required for adequate fit
8) Weld everything in place.
9) Use belt, and attach chain/pullies/belt
10) Use some sort of "L" bracket to secure shifter in appropriate position, being sure to attach cables to it before install
11) run cables back to trans, attach, make final adjustments.
12) (optional) weld rear protector bar back on as you please. This makes lifting the rear of the kart so much easier.
We only ship the item to PayPal verified shipping address. Please make sure your shipping address is the same as PayPal, no changes are allowed once the order is shipped.
All USA orders will be shipped out via USPS, UPS or Fedex with a valid tracking number. We do not ship to P.O. Boxes, APO/FPO or Military Mail Boxes.
We do not cover any import Duty and Tax. Customer should be responsible for the Import tax. Contact us , we will try our best to help on minimizing it.
For HK/TW buyers, please notify us your government ID #.
For BRA,AR,PER buyers, please leave us your CPF#, CUIT# or RUC# correspondingly.
We accept Paypal only for the payment thru ebay, please do not pay directly to our Paypal account.
Paypal allows to pay by Credit Card, Direct Debit, VISA, eCheck, or other methods, please kindly check with Paypal for more information.
For multiple purchases, please add items to your Ebay shopping cart and pay once for the entire order.
Please kindly contact us before returning your order(s), our representatives will send you the detailed instructions.
Our guarantee is only for the cost of the item, we will not be responsible for any other expenses such as installation, labor, towing, repair or any other related expenses.
On Jul 9, 2024 at 01:35:00 PDT, seller added the following information: