This is an alternative to the
expensive yearly winterization. I'm using this on myTige inboard V-drive
in Minnesota instead of paying the $700 cost for annual winterization.
This kit includes two WiFi capable thermal controllers that individually power
two portable heaters that can be located in the engine compartment to keep it
above freezing. The WiFi controllers regulate power to the heaters within
user defined temperature parameters and provides notifications via free mobile
app to your mobile phone if the temperature goes outside of user set
parameters. See photo examples of the trend lines available in the free
mobile app - in the screen shots you can see an example when the temperature
drops below the trigger point of 45 degrees F, activating the heater and
warming up the engine bay to the upper limit. There is also an example of
what the low temperature alarm notification looks like in the App. In the
event of a low temperature alarm, in addition to the notification received on
your mobile phone, the temperature controller also emits an audible alarm and
it is also indicated in the app. There is also an alarm notification if
the controller goes offline either due to loss of WiFi or power.
I use two heaters with two
independent controllers as a means of redundant backup should one controller or
one heater fail. The temperature controllers include a temperature probe
that I recommend placing on the opposite side of the engine bay from the heater
(this is to assure in the event of a controller or heater failure, the single
heater heats up the entire engine bay to above the setpoint rather than only
the side the heater is on). You could potentially use just 1 controller
and heater, but a failure of either could then be catastrophic to your engine.
This kit includes two temperature
controllers, each one WiFi capable, two portable space heaters and instructions
for suggested setup. Temperature controllers without WiFi are also
available for less money. If you wish to make adjustments to the contents
of the kit (for example if you want to purchase only the controllers and desire
to use your own heaters) please reach out and I can customize a listing for
you.
IMPORTANT NOTE: I make no
guarantees or warranty with regards to the components or overall
performance. Due to the many different makes and models of boats, weather
conditions and storage options, I make absolutely no guarantee that this will
work for your specific application. I highly suggest installing this
along with a proper winterization and monitoring its performance in the free
mobile app for the first year to verify that it is capable of keeping your
engine bay well above freezing. Any purchase of this kit acknowledges
that I bear no responsibility or liability with regards to any damage
incurred. You are responsible for making sure your boat is adequately
protected from fire and/or freezing.