MSD Ignition 6201 Digital-6A Ignition Controller

Ignition Control Module

Digital-6A Ignition Controller

Digital-6A Ignition Controller; For 4/6/8 cyl. Engines; Red;


SPECIFICATIONS:
  • Color: Red
  • Current Draw: .7 Amp per 1000 RPM
  • Primary Voltage: 520-540
  • RPM: 15000
  • Secondary Voltage: 45000
  • Spark Duration: 20 Degree Crankshaft Rotation
  • Spark Energy: 135-145 mJ per spark
  • Voltage: 12-15 V; 7 V Start
  • WARNING CA Proposition 65: Yes
  • WARNING CA Proposition 65 Message: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

FEATURES:
  • Will not accept a rev limiter
  • High Output w/530 Volts And 135Mj Of Spark Energy
  • Efficient components use less current to produce more power
  • Built-in LED for system checks
  • All wires exit through a locked; sealed connector
  • Compatible w/4/6/8 Cylinder Engines

If youre looking to improve the performance of your modified mill, we have the answer. Whether youve done a cam swap, or bolted on a carb, intake and headers_ the 6A is a surefire way to harness all the ponies under your hood. The Digital 6A is a microprocessor controlled, capacitive discharge ignition that multi sparks up to 3,000 RPM providing easy starts, a clean, smooth idle and quick throttle response by optimizing your engines efficiency. Above 3,000 RPM, a single spark stays lit for up to 20 Degree of crankshaft rotation ensuring a complete burn of the air / fuel mixture in every cylinder. A sealed, locking connector keeps the minimal wiring of the 6A tidy for a clean installation in all applications. It can be run on 4, 6 and 8 cylinder engines with a 12 volt negative ground electrical system and can be triggered with breaker points, an electronic amplifier or magnetic pickups.

Racers never stop experimenting as they search for every way to wring out more power or handling performance to to gain an edge over the competition. The team at MSD is no different as we strive to deliver the products you need to meet your performance goals. We continue to innovate and invent components and technology that deliver performance and reliability with products that are easy to use and install. Over the course of 40-plus years, MSD Performance has been driving the development of innovative components that helped shape the way our cars race and perform. From super speedways to road courses, land speed racing to top fuel dragsters, and of course your traditional hot rod, MSD has provided the components to fire nearly anything in motorsports. Early on, MSD focused squarely on ignition systems with revolutionary products like the multiple sparking CD ignition, timing and rev controls, billet aluminum distributors and the Pro-Mag, an incredible breakthrough in power and endurance. Today MSD is developing electronics for your entire powertrain. The Atomic EFI systems for the LS engine platform and throttle body are now complemented with a transmission controller. Our DynaForce Starters and Alternators ensure that your engine cranks over to fire up and the Alternators keep it charged. MSD is poised to deliver components that work and communicate together to provide performance and value.

** Please contact us for shipping quotes to Alaska, Hawaii, Guam, Puerto Rico and International destinations **

          Payment

 

 


We accept payment by any of the following methods: PayPal

 

Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!

BUY NOW!

          Returns & Warranty


Uninstalled products may be returned within 30 days of the purchase date.  Buyer is responsible for return shipping.  Original shipping charges will not be refunded.  All returns are subject to a 20% restocking fee.  Exchange of equal or greater value may not be subject to a restocking fee.


Warranty on product is replacement of part only for defects in materials and workmanship.  No cash or compensation for labor will be given for defects in material and workmanship.  Defective part must be returned in order for new part to be provided.  Visit our store for futher details.

          Shipping

We ship Monday-Friday and strive for orders to ship within 1-2 business days.  We use UPS, FedEx and USPS for the majority of our orders but reserve the right to use alternative but comparable means to get you your product as quickly and efficiently as possible.  All orders shipping UPS will require a physical address, please provide this upon ordering to expedite the shipping process.

          International Buyers

Import duties, taxes and customs clearance and other charges are not included in the item price or shipping cost.  These charges are the buyer's responsibility.  Please check with your country's customs office to determine what these additional costs will be prior to completing your purchase.

MSD Ignition 6201 Digital-6A Ignition Controller

Ignition Control Module

Digital-6A Ignition Controller

Digital-6A Ignition Controller; For 4/6/8 cyl. Engines; Red;


SPECIFICATIONS:
  • Color: Red
  • Current Draw: .7 Amp per 1000 RPM
  • Primary Voltage: 520-540
  • RPM: 15000
  • Secondary Voltage: 45000
  • Spark Duration: 20 Degree Crankshaft Rotation
  • Spark Energy: 135-145 mJ per spark
  • Voltage: 12-15 V; 7 V Start
  • WARNING CA Proposition 65: Yes
  • WARNING CA Proposition 65 Message: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

FEATURES:
  • Will not accept a rev limiter
  • High Output w/530 Volts And 135Mj Of Spark Energy
  • Efficient components use less current to produce more power
  • Built-in LED for system checks
  • All wires exit through a locked; sealed connector
  • Compatible w/4/6/8 Cylinder Engines

If youre looking to improve the performance of your modified mill, we have the answer. Whether youve done a cam swap, or bolted on a carb, intake and headers_ the 6A is a surefire way to harness all the ponies under your hood. The Digital 6A is a microprocessor controlled, capacitive discharge ignition that multi sparks up to 3,000 RPM providing easy starts, a clean, smooth idle and quick throttle response by optimizing your engines efficiency. Above 3,000 RPM, a single spark stays lit for up to 20 Degree of crankshaft rotation ensuring a complete burn of the air / fuel mixture in every cylinder. A sealed, locking connector keeps the minimal wiring of the 6A tidy for a clean installation in all applications. It can be run on 4, 6 and 8 cylinder engines with a 12 volt negative ground electrical system and can be triggered with breaker points, an electronic amplifier or magnetic pickups.

Racers never stop experimenting as they search for every way to wring out more power or handling performance to to gain an edge over the competition. The team at MSD is no different as we strive to deliver the products you need to meet your performance goals. We continue to innovate and invent components and technology that deliver performance and reliability with products that are easy to use and install. Over the course of 40-plus years, MSD Performance has been driving the development of innovative components that helped shape the way our cars race and perform. From super speedways to road courses, land speed racing to top fuel dragsters, and of course your traditional hot rod, MSD has provided the components to fire nearly anything in motorsports. Early on, MSD focused squarely on ignition systems with revolutionary products like the multiple sparking CD ignition, timing and rev controls, billet aluminum distributors and the Pro-Mag, an incredible breakthrough in power and endurance. Today MSD is developing electronics for your entire powertrain. The Atomic EFI systems for the LS engine platform and throttle body are now complemented with a transmission controller. Our DynaForce Starters and Alternators ensure that your engine cranks over to fire up and the Alternators keep it charged. MSD is poised to deliver components that work and communicate together to provide performance and value.

** Please contact us for shipping quotes to Alaska, Hawaii, Guam, Puerto Rico and International destinations **

 

 


We accept payment by any of the following methods: PayPal

 

Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!

          Payment

          Shipping

We ship Monday-Friday and strive for orders to ship within 1-2 business days.  We use UPS, FedEx and USPS for the majority of our orders but reserve the right to use alternative but comparable means to get you your product as quickly and efficiently as possible.  All orders shipping UPS will require a physical address, please provide this upon ordering to expedite the shipping process.


Uninstalled products may be returned within 30 days of the purchase date.  Buyer is responsible for return shipping.  Original shipping charges will not be refunded.  All returns are subject to a 20% restocking fee.  Exchange of equal or greater value may not be subject to a restocking fee.


Warranty on product is replacement of part only for defects in materials and workmanship.  No cash or compensation for labor will be given for defects in material and workmanship.  Defective part must be returned in order for new part to be provided.  Visit our store for futher details.

          Returns & Warranty

          International Buyers

Import duties, taxes and customs clearance and other charges are not included in the item price or shipping cost.  These charges are the buyer's responsibility.  Please check with your country's customs office to determine what these additional costs will be prior to completing your purchase.

Powered by SureDone