Carburetter is totally disassembled then chemically and ultrasonically cleaned. Passages are blown clear with high pressure air. Piston and bore are polished and mounts trued. New metering needle seal installed to prevent oil leakage from damper tube. Standard metering needle installed. New throttle shaft seals installed. New fuel inlet needle valve installed and float level adjusted. Gaskets, diaphragm and o-rings replaced. Auto choke is totally disassembled, cleaned, kick piston honed, mount surfaced then tuned and vacuum tested. Includes new manifold mounting gasket set. Turnaround time is approximately 2 weeks after I receive it. Final tuning to be performed by buyer

Bolt it on add oil and drive™