Dinan D330-0021 Free Flow Axle-Back Exhaust Fits 2012-2016 BMW 2/3/4-Series
689.95
Blemished
Product
Dinan D330-0021
Free Flow Axle-Back Exhaust Fits 2012-2016 BMW 2/3/4-Series
Dinan Part Number
D330-0021
Free Flow Axle-Back Exhaust Fits 2012-2016 BMW 2/3/4-Series
Product Information
This part ships complete,Scratches
on tips, tips have damage. Ships as is with no warranty.
Greater
power gains are achieved with a larger high-performance intercooler.
The Dinan dual core intercooler provides a 240% increase in face area
along with an equally impressive increase in volume, substantially
reducing the pressure drop to 0.8 psi, as well as providing for more
efficient heat exchange and more consistent output power. Dinan's
unique dual-core design allows 2 separate cores to be working in
conjunction with one another at all times. This doubling of resources
is directly responsible for a 60% improvement in the delta from charge
air temperature to ambient temperature (see diagrams). "Cool down" time
is also reduced, enabling the cars to produce full power under varying
driving conditions such as stop and go traffic. This leaves the chances
of being susceptible to heat soak nearly a thing of the past. The
system has been engineered to be as direct a replacement as possible to
the stock unit, requiring only minor modifications for a clean,
factory-like installation. The increased thermal efficiency provided by
the Dinan dual core intercooler will also enhance turbocharger
reliability in addition to overall power. On a stock vehicle, power
gains can be had from 4000 RPM and beyond (when the car is in boost).
In order to achieve the best performance, the intercooler should be
paired with the Stage 3 DINANTRONICS Performance Tuner as it provides
optimization of the intercooler. In particular, it extends the power
band to be more robust and powerful from 5000 RPM to redline whereas
without tuning the bulk of the gains are from 6000 RPM to redline.
Features:
- Max
gains (N55 engine) of 15 HP and 13 lb-ft of torque @ 6250 RPM (greater
gains and a wider power band can be achieved when paired with stage 3
DINANTRONICS)
- Max
gains (N20/N26 engine) of 6 HP and 5 lb-ft of torque @ 5500 RPM
(greater gains and a wider power band can be achieved when paired with
stage 3 DINANTRONICS)
- Face
area 240% larger than the stock intercooler setup for maximum
cooling efficiency to deter heat soak.
- Charge
Air Pressure drop: 0.80 PSI (25% improvement over stock)
- Charge
Air Temperature drop: 155º F (11% improvement over stock)
- Charge
Air Temperature / Ambient Temperature Delta: 18º F @ 6250 RPM
(60% improvement over stock)