We want to offer newest generation of our timing system with new additional features!

* DC/DC switching power supply – now Decoder can support wider power voltage range: 8-15V!

* Integrated Bluetooth audio transceiver – you can hear loop pass audio signal directly from decoder to your headphone wirelessly!

* And 3,2,1….. – Main new feature – Integrated LiIo backup battery! With this battery decoder can work autonomically more than 3 hours! 

Don’t worry if someone accidentally pulling out the power cable, or you having problems with electrical network failure – decoder will not losses connectivity with your Laptop!

When you order lap timing system, you will receive:

Decoder

2x5m detection loop with termination resistor

Termination resistor with short 2x30cm cables, for your own loop (if you will made your own loop)

8m or longer coaxial cable

~220V/12 VDC adapter for decoder. You can always use your AC/DC any polarity 8-15V 2A adapter for decoder power

VDC connection cable for decoder power from car 12V plug

VDC connection cable with unleaded ends for decoder power from battery (you can use 3S-4S LiPo or 12V Pb battery and your own connectors)

Ethernet connection cable; USB connection cable.

USB flash key with user manual, drivers, and other third party free / demo lap timing software.

One personal direct power (3.5-12V, <20mA) personal transponder, compatible only with our system.

This set has all needed components for using directly “out of the box”.

This timing system works with all our transponders. Also works with MRT, AMB DP, Mylaps RC3; MylapsRC4 hybrid

We produce very sensitive signal amplifier, which allows to use loop up to 2x18m (36m) long, especially for boat modelers

This timing system does not work with "pure" Mylaps RC4 transponders( 3-wire).

Minimum lap time - 3.5sec

Decoder has following features:

FastEthernet interface

Wifi interface

RS232 support

Audio out for headphones

Supported software:

       RCGarage, 

       Zround (free),

       Laps free (free) - only through USB,

       Flip Sider racing (free),

       RC-timing

       RCM (Beginner version is free) / Ultimate,

       RCSP, 

       Live Time RC - Issue: 10 sec delay on race start.

Works with "AMM converter" free Android app - for direct data reading through Wifi.

We guarantee that any items manufactured by us are fully tested and working well. Warranty period - 1year. 

If Lap Timing System burns out, or faults we can repair this equipment for reasonable price. Our goal is not to double profit from the client.

If you have any questions please contact us. In period of 1 year from selling the system, we can offer you to buy a new device for a special price, if it is not possible to repair.

Lap timing system is non-professional, designed for small / medium events or private use.

Timing system works fine with 97-98% above mentioned transponders. After long testing period, we have 2-3% of transponders which didn't work for unknown reasons. So if you use this Timing system for the event, please have few spare working transponders.

System is designed for the timing and scoring an RC models / go-karts / motorsport events.

The signal from each transponder in the RC model / go-kart is caught by the detection loop installed on the track surface or above water (for RC boat models).

Decoder is compatible with the same "passive" loop, which uses AMB 20, Mylaps RC2 and etc. timing systems. The loop is connected via "black box" to decoder.

Decoder transmit data to connected computer. Each transponder has a unique number, which enables decoder to identify particular RC model / kart on the track.

Feel free, and ask me any questions!