《Compatible car models》

■UZS186 Majesta [first half/second half] (July 2004 to March 2009)

■UZS187 Majesta 4WD [first half/second half] (July 2004 to March 2009)

■Vehicle height can be controlled from approximately +30mm to -90mm

■16 independent front and rear levels + Hyper LOW vehicle height control!

■Hyper LOW mode function! Extreme lowdown achieved!

■One-touch normal return function!

■You can set the vehicle height independently for the front and rear while looking at the display. Left and right independent settings are also possible for the front only.

■Digital meter function. Can display up to 350km/h in 1km/h increments.

■Speed alarm can be set between 60km/h and 180km/h. An alarm will be displayed if the speed is exceeded.

■Safety standard compliance mode setting function!

■Five vehicle height settings can be memorized. A total of 6 options including normal. Easy to switch.

■Lock canceller function!

■TEMS is fixed in hard state with high damping force. (31 Celsior/171 Majesta/4WD vehicles excluded)

■Air valves and compressors can be monitored and vehicle height control operations can be confirmed in real time.

■Bar graph display of real-time vehicle height data. You can check the vehicle height condition at a glance.

Manufacturer: Data System Co., Ltd.

《Functions/Features of this product》

●Equipped with hyper LOW mode

Equipped with a newly developed hyper LOW mode that achieves the ultimate low form that you could ever want.

●Vehicle height setting function

It is possible to set the vehicle height of the air suspension vehicle in 16 stages + hyper LOW independently for the front and rear.

[UP 6 stages - Normal - DOWN 9 stages, total 16 stages + Hyper LOW]

●Left and right balance adjustment function

You can adjust the left and right balance only on the front.

●Car model setting mode

The car model name is displayed on the dot matrix display, allowing you to set the settings accurately.

●Safety standard mode

Operations during the vehicle height setting stage and while driving are restricted. Can be canceled.

●Valve monitor function

It monitors the air valves and compressors of each wheel, allowing you to check vehicle height control operations in real time.

●Height memory function

5 vehicle height settings are stored in memory and 6 vehicle height settings including normal can be easily switched.

●Newly developed 64 x 16 dot matrix liquid crystal display

Equipped with a blue/red dual backlight to realize a variety of graphical displays.

●Height monitor function

Real-time vehicle height data sent from the vehicle height sensor is displayed as a bar graph, allowing you to check the vehicle height inside the vehicle (the display is not absolute. Please use it as a guide only).

●Speedometer function

Equipped with a digital speedometer that can display up to 350km/h in 1km/h increments.

●Speed alarm setting

Speed alarm settings can be set in 10km/h increments between 60km/h and 180km/h. If the set speed is exceeded, the alarm display will be displayed.

●Equipped with ALL function

Equipped with ALL function that follows sudden vehicle height up/down

■Driving with the vehicle height changed may put a strain on the suspension and cause suspension damage.Never drive with the vehicle height changed.

■About vehicle inspection (vehicle inspection)

ASC680 is equipped with a safety standard compliance mode, and when this mode is set, the following is established to ensure safety standards.

・Ensuring a minimum ground clearance of 9cm (regulations at the setting stage)

・Vehicle height cannot be controlled even if operated while driving (operation restrictions while driving)

However, the Land Transport Bureau does not have clear regulations regarding what to do when ASC680 is installed, and depending on the Land Transport Bureau or Vehicle Inspection Center, the vehicle may fail the inspection. Please be sure to remove the ASC680 or move it to a place where it cannot be operated during vehicle inspection.

*Be sure to remove the special harness and return to normal condition. If only the main body is removed, a problem will occur.

● This product ASC680 is an air (active) suspension vehicle, and is only for vehicles that have a vehicle-specific harness.

It cannot be installed on vehicles that do not have a vehicle-specific harness.

● Driving with the vehicle height changed can cause abnormal tire wear, lack of traction, abnormal handling, etc. due to alignment changes, and can also cause a worsening of ride comfort.

● Failure, damage, or breakage of everything related to the air (active) suspension system (suspension body, compressor, vehicle height sensor, suspension CPU, etc.) due to the use of this product and the vehicle body (body, aero parts, tires, wheels, etc.) We are not responsible for any malfunction, damage, or breakage of mufflers, etc.).

● This product is designed based on a normal vehicle. This product is not compatible with vehicles whose vehicle height has been intentionally adjusted to change the vehicle height, or whose suspension system has been modified or processed.

● If installed in a modified or poorly maintained vehicle, it may not only not work properly, but may also cause damage to the product and vehicle.

● The speedometer display may have an error when accelerating or decelerating compared to the speedometer on the vehicle.

● Be sure to install the product by a contractor with specialized knowledge and equipment.

● We are not responsible for any accidents resulting in personal injury or property damage, vehicle breakdown or damage, or fines or demerit points due to safety violation.

Please feel free to ask questions.

Expedited Shipping 1-4 bussiness days

Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.
Thank you for your understanding.